• Journal of Life Science
• /
• v.20 no.2
• /
• pp.153-160
• /
• 2010

This study was conducted to examine the utilization of immunohistochemistry using the bovine anti-brucella immunoglobulin G (IgG) antibody in the diagnosis of brucellosis and to develop a functional biomarker relation for the progress of the disease. Anti-brucella IgG antibody was purified from the affected bovine serum using an affinity chromatography. We performed our investigation on 17 cases of brucellosis and 19 control cases with negative Rose-Bengal test results. Our purified anti-brucella IgG antibody showed a positive immunoreactivity in cytoplasmic hepatocytes of the centrilobular region, and glomeruli and tubular epithelium of the kidney. The protein pattern of the affected liver versus control was analyzed by two-dimensional electrophoresis, showing a different expression pattern of proteins between the two. Five protein spots were up-regulated and another were five down-regulated in the brucellosis liver. Significant upregulaton of catalase and 3-hydroxyacyl-CoA dehydrogenase might be due to a compensatory reaction in response to the endotoxic shock of brucella. In conclusion, the anti-brucella IgG antibody may be a good tool for discriminative diagnosis of the affected tissues and proteomics data suggest new target proteins underlying a possible pathogenic mechanism of brucellosis.

• The Korean Journal of Pharmacology
• /
• v.21 no.2
• /
• pp.90-98
• /
• 1985

1) In the study of the forced-swimming test in mice (FSM), the duration of immobility posture was dose-dependently shortened by ${\alpha}_2$-agonists, clonidine and guanabenz. BH-T 933 and oxymetazoline also decreased it . Xylazine rather increased the immobility duration at low dose. 2) ${\alpha}_1$-Agonists, cirazoline, amidephrine and methoxamine, however, showed inconsistent effect on the immobility duration (ID). 3) The decrease in ID by clonidine and guanabenz was antagonized by pretreatment with yohimbine, idazoxan and phentolamine (${\alpha}_2$antagonist), but not by prazosin and corynanthine (${\alpha}_1$-antagonist) .4) The ID in the FSM was shortened dose-dependently by d-amphetamine, and it was also antagonized by yohimbine, but not by prazosin. 5) In the mice pretreated with either ${\alpha}$-methyl-p-tyrosine or reserpine, or with combination of both, the decrease in ID was still evoked by clonidine. 6) When the mice were chronically treated with antidepressants (desipramine and imipramine), or with electroconvulsive shock, clonidine still decreased the ID as it did in the control. 7) These results provided the evidences to hypothesize that the change of the ID in the FSM is closely related with the postsynaptie ${\alpha}_2$-adrenoceptor located on the central noradrenergic neuron body. Furthermore, it is assumed that this escape-directed behavior enhanced by ${\alpha}_2$-adrenoceptor agonist may be the result in some analogy with the incentive of drives which are directed toward the self-preservation.

• The Korea Journal of Herbology
• /
• v.31 no.5
• /
• pp.93-98
• /
• 2016

Objectives : Hwangheuk-san is a complex prescription composed of oriental traditional medicine and has been reported for antioxidant, antimicrobial and anticancer effects in the recent study. Methicillin-resistant Staphylococcus aureus (MRSA) is one of important causes of fatal infectious diseases such as septicemia, endocarditis, toxic shock syndrome, pneumonia, skin and soft tissue infections (SSTIs). S. aureus is reported as being for a variety of human diseases and its epidemiological relevance is mainly due to their ability of becoming highly resistant to common antimicrobials such as tetracycline, penicillin, cphalosporin and aminoglycoside. The objective of this study is to determine the antimicrobial effect of Hwangheuk-san ethanol extracts (HHS) and synergistic effects with antibiotics oxacillin against MRSA.Methods : The antimicrobial activity of HHS was measured by the disc diffusion method, broth microdilution method and the checkerboard dilution test, time-kill curve assay was performed to investigate synergistic effects with antibiotics oxacillin against MRSA.Results : HHS showed antimicrobial activity against MRSA with a MIC value of 125 ㎍/㎖. In the checkerboard test, the interaction of HHS with antibiotics oxacillin produced almost synergy or partial synergy against MRSA. This study showed that HHS reduced the MICs of oxacillin tested, and a remarkable antibacterial effect of HHS, with membrane permeability enhancers.Conclusions : These results suggest that HHS has the antimicrobial effect and synergistic effects with antibiotics oxacillin against MRSA. This study thus can be a valuable source for the development of a new drug with low MRSA resistance.

• Journal of Korean Society of Forest Science
• /
• v.90 no.5
• /
• pp.663-671
• /
• 2001

This study estimated the impacts of the interest rate change on the forest products import quantities in Korea. The first objective is to analyze whether there is any causal relationship between change in the interest rate and changes in the import quantities of forest products in Korea. And the second objective is to evaluate the dynamics of the impacts of the interest rate change on the forest products import quantities in Korea. The relationship between the interest rate and the import quantity was represented by bivariate vector autoregressive model. Whether there is any causal relationship between change in the interest rate and changes in the import quantities of forest products was analyzed by the causality test. And the dynamics of the impacts of the interest rate change on the forest products import quantities were evaluated by variance decomposition analysis and impulse response analysis. The import quantity of forest products can be explained by the lagged interest rate variables and the lagged import quantity variables in Korea. Change in the interest rate causes change in the plywood import quantity in Korea. In the bivariate model of the plywood import quantity, after three months, the interest rate change accounts for about twenty percent of variation in the import quantity, and its own change accounts for about eighty percent of variation in the import quantity. On the other hand, the impact of a shock to the interest rate is significant for about six months on the import quantity of plywood in Korea. That is, if the interest rate change had an impact on the import quantity of plywood in Korea, it was only of a short-term nature.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.546-554
• /
• 2018

The Bulk market, unlike the line market, is characterized by stiff competition where certain ship or freight owners have no influence on freight rates. However, freights are subject to macroeconomic variables and economic external shock which should be considered in determining management or chartering decisions. According to the results analyzed by use of ARIMA Inventiom model, the impact of the financial crisis was found to have a very strong bearing on the BDI index. First, according to the results of the VEC model, the libor rate affects the BDI index negatively (-) while exchange rate affects the BDI index by positively (+). Secondly, according to the results of the VEC model's J ohanson test, the order ship volume affects the BDI index by negatively (-) while China's economic growth rate affects the BDI index by positively (+). This shows that the shipping company has moved away from the simple carrier and responded appropriately to changes in macroeconomic variables (economic fluctuations, interest rates and exchange rates). It is believed that the shipping companies should be more aggressive in its "trading" management strategy in order to prevent any unfortunate situation such as the Hanjin Shipping incident.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.133-142
• /
• 2022

The purpose of this study is to develop an impact crusher with a radial rotating plate installed at the bottom, which is a shock absorber that can produce high-quality recycled coarse aggregate for concrete and to verify the effect of improving the quality performance of recycled coarse aggregate and its applicability through concrete tests. As a result, it showed improved quality in all items such as absolute dry density, absorption rate, abrasion resistance, Particle shape judgment rate, amount lost in the 0.08 mm sieve passing test, alkali aggregate reaction, clay mass, stability, and impurity content, and it was found to meet the criteria of recycled aggregate quality standards. In addition, the air volume and slump of concrete to which recycled coarse aggregate is applied meet all domestic standards. According to the test results of the compressive strength characteristics by age of concrete according to the mixing ratio of the recycled coarse aggregate, it was confirmed that the mixing ratio of the recycled coarse aggregate was applicable up to 60 %.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.4
• /
• pp.753-762
• /
• 2024

Tunnels have limited evacuation areas, and It is difficult for cars coming from behind to recognize the accident situation in front. Since an accident is very likely to lead to a serious secondary accident, a IoT-based smart tunnel accident warning system was studied to prepare for traffic accidents that occur in tunnels. If the measured values from the flame detection sensor, gas detection sensor, and shock detection sensor in the tunnel exceed the standard, it is judged to be an emergency situation and an alert system is designed to operate. The accident information message was designed to be displayed on the LCD and transmitted to drivers inside and outside the tunnel through a Wi-Fi communication network. A performance test system was established and performance evaluation was performed for several accident scenarios. As a result of the test, it was confirmed that the accident alert system can accurately detect accidents based on given reference values, perform alert procedures, and transmit alert messages to smart phones through Wi-Fi wireless communication. And through this, its effectiveness could be confirmed.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Proceedings of the Ginseng society Conference
• /
• 1988.08a
• /
• pp.92-98
• /
• 1988

The present study was performed to find the effects of ginseng and its saponins. which is written in Chung Yao Ta Tsu Tien as anti-amnesia in its chief indication. on experimental amnesia in mice. In the step through test. ginsenoside $Rb_1\;(GRb_1)\;and\;GRg_1$ facilitated the registration of memory and antagonized the electroconvulsive shock (ECS)-induced inhibition of the retention of memory. Moreover. $GRg_1$ antagonized the EtOH-induced inhibition of the retrieval of memory. In the step down test. $GRb_1\;GRb_2\;and\;GRg_1$ antagonized the ECS-induced inhibition of the retention of memory. Moreover. $GRg_1$ antagonized the EtOH-induced inhibition of the retrieval of memory and facilitated the acquisition of short term memory. In the shuttle hox and lever press tests. they have no effects on acquisition and retrieval of memory. except $GRb_1\;GRb_1$ depressed the retrieval of conditioned avoidance response in the shuttle box test. After the end of four tests. the effects of these orally administered drugs on sedative. analgesic. antipyretic and anticonvulsant actions. and on spontaneous and exploratory movements were tested in doses of less than 500mg/kg. but they had none of these effects. Present study may indicate that $GRg_1$ had effects on the retrieval of memory and on the acquisition process of learning response. The recent research on the role of NGF for the survival. regeneration and regulation of brain in adult animals. indicated the importance of NGF on dementia and amnesia. During our research on the specificity of the neurite out growth induced by NGF. we found that the effect of NGF was potentiated by $GRb_1$ in organ cultures of chick embryonic dorsal root ganglia. Then. the effect of $GRb_1$ on neuronal cell survivalin cell culture system was studied. $GRb_1$ potentiated the NGF-mediated increase of neurofilaments in cell cultures of chick embryonic sensory and sympathetic neurons. NGF with $GRb_1$ also showed a tendency to increase the number of surviving neurons of rat embryonic cerebral cortex. NGF increased choline acetyl transferase activity in cell cultures of rat embryonic septum area neurons. but $GRb_1$ did not potentiate NGF activity in cell cultures of rat embryonic septum area neurons. Present study may indicate that $GRb_1$ plays an important role for the survival or regeneration of neurons in the brain.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.3
• /
• pp.13-19
• /
• 2018

The soldering property of Pb-containing solder(Sn-Pb) and Pb-free solders(Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.7Cu-1.6Bi-0.2In) for solar combiner box module was compared. The solar combiner box module was composed of voltage and current detecting modules, diode modules, and other modules. In this study, solder paste printability, printing shape inspection, solder joint property, X-ray inspection, and shear force measurements were conducted. For optimization of Pb-free soldering process, step 1 and 2 were divided. In the step 1 process, the printability of Pb-containing and Pb-free solder alloys were estimated by using printing inspector. Then, the relationship between void percentages and shear force has been estimated. Overall, the property of Pb-containing solder was better than two Pb-free solders. In the step 2 process, the property of reflow soldering for the Pb-free solders was evaluated with different reflow peak temperatures. As the peak temperature of the reflow process gradually increased, the void percentage decreased by 2 to 4%, but the shear force did not significantly depend on the reflow peak temperature by a deviation of about 0.5 kgf. Among different surface finishes on PCB, ENIG surface finish was better than OSP and Pb-free solder surface finishes in terms of shear force. In the thermal shock reliability test of the solar combiner box module with a Pb-free solder and OSP surface finish, the change rate of electrical property of the module was almost unchanged within a 0.3% range and the module had a relatively good electrical property after 500 thermal shock cycles.