• 동력기계공학회지
• /
• 제20권4호
• /
• pp.5-11
• /
• 2016

This study analyzed the damage to a slitting knife after cutting steel sheets. Damages to the structure were observed and wear tests were conducted. In addition, the degradation on the damaged and undamaged parts was compared with a micro Vickers hardness test. Weibull statistical analysis was carried out in order to evaluate the reliability of the micro Vickers hardness measured data. Spalling of the edge portion occurred by degradation during use over a long period. Rough parts in the specimens were caused by damage because the slitting knife was used for 1 year. The friction coefficient and wear loss at the damaged parts of the knife edge were slightly larger from shock due to repetitive cutting operation. The micro Vickers hardness followed a two-parameter Weibull probability distribution.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.111-115
• /
• 2001

The study of nonlinear gas transport in rarefied condition or associated with the microscale length of the geometry has emerged as an interesting topic in recent years. Along with the DSMC method, several fluid dynamic models that come under the general category of the moment method or the Chapman-Enskog method have been used for this type of problem. In the present study, on the basis of Eu's generalized hydrodynamics, a computational model for diatomic gases is proposed. The preliminary result indicates that the bulk viscosity plays a considerable role in fundamental flow problems such as the shock structure and shear flow. The general properties of the constitutive equations are obtained through a simple mathematical analysis. With an iterative computational algorithm of the constitutive equations, numerical solutions for the multi-dimensional problem can be obtained.

• 기술사
• /
• 제32권6호
• /
• pp.148-157
• /
• 1999

As cultural Heritages are source of the national history and a life transition, their extinction is a fatal shock as result of cutoff the genealogy of the creative national spirit. So, we have necessarily to protect them, and to get the duty and the responsibility which the cultural inheritance hands over tnem to descendants with preserving and meaning safely at present time. In these days, the risk of fire in the Cultural Heritages building is increased because of rash changing environments from the indiscreet development of them. Accordingly, in order to get the original transmission of the Cultural Heritages, this paper involves being intensive the fire safety information of the Cultural Heritage in kyonggi-do province, analyzing their diagnoses, and studying a Fire Safety Prevention Management model to protect and to maintain them continuously. Therefore, it is to contribute from this approach to collecting fire safety information, analyzing diagnostic problems in fire accidents, and to manage the prevention method for protecting and maintaining the Cultural Heritages.

• 한국연소학회지
• /
• 제12권2호
• /
• pp.20-25
• /
• 2007

The supersonic combustion experiments are carried out using T3 free-piston shock tunnel. Hydrogen Fuel is injected in the cavity parallel with air(or nitrogen) flow. The equivalence ratios in this study are 0.132 and 0.447. Experimental measurements use OH-PLIF near the cavity and pressures in the combustor. For parallel fuel injection case, direct fuel add into cavity leads to increase of cavity pressure. And Flame exists just near the bottom wall for low equivalent ratio. There is no flame in the cavity because of no mixing in it. Compared to the inclined fuel injection, ignition delay length is longer for low equivalence ratio in both case. OH distribution is not a single line but a repeatable fluctuation flame structure by turbulence. Pressure distributions have nothing to do with the fuel injection position.

• Journal of Microbiology and Biotechnology
• /
• 제27권3호
• /
• pp.644-647
• /
• 2017

Peptidyl prolyl cis/trans isomerases (PPIases) catalyze the cis/trans isomerization of peptidyl-prolyl peptide bonds preceding prolines. We investigated the protein-protein interaction between a 22 kDa PPIase (VaFKBP22, an FK506-binding protein) and the molecular chaperone DnaK derived from Vibrio anguillarum O1 (VaDnaK) using GST pull-down assays and a bacterial two-hybrid system for in vivo and in vitro studies, respectively. Furthermore, we analyzed the three-dimensional structure of the protein-protein interaction. Based on our results, VaFKBP22 appears to act as a cochaperone of VaDnaK, and contributes to protein folding and stabilization via its peptidyl-prolyl cis/trans isomerization activity.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.31-36
• /
• 2007

The supersonic combustion experiments are carried out using T3 free-piston shock tunnel. Hydrogen Fuel is injected in the cavity parallel with air(or nitrogen fuel) flow. The equivalence ratios in this study are 0.132 and 0.447. Experimental measurements use OH-PLIF near the cavity and pressures in the combustor. For parallel fuel injection case, direct fuel add into cavity leads to increase of cavity pressure. And Flame exists just near the bottom wall for low equivalent ratio. There is no flame in the cavity because of no mixing in it. Compared to the inclined fuel injection, ignition delay length is longer for low equivalence ratio in both case. OH distribution is not a single line but a repeatable fluctuation flame structure by turbulence. Pressure distributions have nothing to do with the fuel injection position.

• Journal of Astronomy and Space Sciences
• /
• 제16권1호
• /
• pp.79-88
• /
• 1999

인공위성은 로켓을 이용하여 궤도에 진입하며 발사과정 중 진동, 가속, 충격, 소음 등과 같은 극심한 발사환경을 경험하므로, 이와 같은 발사조건에 견딜 수 있도록 설계/제작 되어야 한다. 본 논문에서는 우리별 3호 비행모델의 구조체에 대해 소개하고, 발사과정에서 겪게 되는 환경을 지상에서 시험한 발사환경시험의 과정과 결과를 소개하고자 한다.

• Journal of Microbiology and Biotechnology
• /
• 제22권11호
• /
• pp.1478-1481
• /
• 2012

Geldanamycin (GM) and its analogs are important anticancer agents that inhibit heat shock protein (Hsp) 90, which is a major chaperone protein in cancer cells. Accordingly, based on interest in obtaining novel natural GM derivatives, the potential of Streptomyces hygroscopicus JCM4427, a GM producer, was explored for novel natural GM derivative(s), resulting in the discovery of new GM analogs as a biosynthetic shunt product and intermediates from its fermentation broth. In this study, the fermentation, isolation, structure determination, and biological activity of the compounds, two new tetracyclic thiazinogeldanamycin (1) and 19-hydroxy-4,5-dihydrogeldanamycin (3), together with the three known 4,5-dihydrothiazinogeldanamycin (2), reblastatin (4), and 17-demethoxy-reblastatin (5), are described.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2002년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.2
• /
• pp.320.3-321
• /
• 2002

Nuclear factor ${\kappa}$B (NF-${\kappa}$B) represents a family of eukaryotic transcription factors participating in the regulation of various cellular genes. Since aberrant regulation of NF-${\kappa}$B has been implicated in the pathogenesis of various diseases including inflammation. asthma. atherosclerosis. AIDS. septic shock. arthritis, and cancer. this transcription factor has been shown to be an interesting target of new drug discovery. (omitted)

• 한국CDE학회논문집
• /
• 제16권5호
• /
• pp.323-330
• /
• 2011

Large number of part design such as for aircraft and automotive development is preceded by functional or sectional design groups for efficiency. With the assembly development of large number of parts, interferences and gaps can be found when the parts and sub-assemblies by those design groups are to be assembled. When rainwater come into the space among parts and is not be drained sufficiently, rainwater within the structure can backflow to gaps or unexpected outlets, which may cause severe problems of part corrosion and electric shock. This research has developed a method and a program to simulate backflow of rainwater within space among parts, which can find unexpected outlets and gaps as in real situation. The developed program can not only simulate up and downstream of liquid, but also the flow with multiple channels of division and joining. The developed method can also be applied to aircraft and ship design process.