• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.49-55
• /
• 2006

Kinematic GPS provides quite good accuracy of position in cm level. Though K-GPS assures high precision measurement in cm level on the basis of an appreciable distance between a station and an observational point, but it has measurable distance restriction within 20 km from a reference station on land. So it is necessary to make out a simple and low-cost method to obtain accurate positioning information without distance restriction. In this paper, the velocity integration method to get the precise velocity information of ship is explained. Next two experimental results (Zig-zag maneuvering test and Williamson turn) as the ship's maneuvering test and also the experimental results of leaving and entering port as slow speed ship's movement were shown. In these experimental results, ship's course, speed and position are compared with those obtained by kinematic-GPS, velocity integration method and dead reckoning position using Gyro-compass and Doppler-log.

• 한국산학기술학회논문지
• /
• 제12권3호
• /
• pp.1313-1318
• /
• 2011

안전하고 정확한 항해를 위해 선박에서는 진북을 나타내는 자이로 콤파스와 자북을 가리키는 마그네틱 콤파스, 그 외에 GPS 등의 다양한 선박 전자장치들이 활용되고 있지만 이러한 장치들의 호환성 문제로 인해 전체 선박 시스템의 효율성 및 유지보수성이 크게 저하되고 있다. 본 논문에서는 이러한 호환성 문제를 해결하기 위해 선박 전자장치의 다양한 출력신호들을 동일한 하나의 표준 형식으로 변환해 주는 프로토콜 통합 시스템을 제안하였다. 시스템 설계 시 다수의 장치들로부터 입력되는 신호들을 동시에 처리하기 위하여 Multi-threading 기법을 적용하였으며, 실험을 통해 이를 통한 데이터 처리 성능 향상을 확인하였다.

• 대한조선학회논문집
• /
• 제45권5호
• /
• pp.554-561
• /
• 2008

This paper deals with an intelligent digital ship which aims at development to support economic and safe services through an integration into the hierarchically layered digital signals such as ship's navigation, maneuvering and control signal and establishing a one-man bridge system in order to provide a support systems between ship and land station. This paper introduces the results of the mid-term project sponsored from Ministry of Commerce, Industry and Energy which consists of three sub-project such as INS(Intelligent Navigation System), AIS(Automatic Identification System), and IMIT (Integrated Maritime Information Technology). The INS system that can allow ships to navigate economically and safely through the integration and analysis of national data within the ship. AIS is a system that reports automatically on the location of the ship in order to prevent the collision between ships and between the ship and the land. IMIT is a integrated system for providing an efficient and economic support system between ships and the land and a ship-land platform and technologies.

• 한국해양공학회지
• /
• 제16권6호
• /
• pp.25-31
• /
• 2002

A system identification method is introduced to increase the prediction accuracy of a ship's maneuverability in PMM test, analysis. To improve the accuracy of linear hydrodynamic coefficients, the analysis techniques of pure sway and yaw tests are developed, and confirmed. In the analysis of sway tests, accuracy to linear hydrodynamic coefficients depends on the frequency of sway motion. To obtain nonlinear hydrodynamic coefficients for large drift angles, a combined yaw test is introduced. Using this system identification method, runs of PMM test can be reduced while retaining sufficient accuracy, compared to the Fourier integration method. Through the comparisons with sea trial results and the Fourier integration method, the accuracy and efficiency of the newly proposed system identification method, based on least square method, has been validated.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.623-626
• /
• 2009

차후 새로운 기술과 선박, 함정 장비를 연결 운용해 나가야 함으로 현재 사용되고 있는 선박의 항해 장비와 연동은 필수적이다. 주간/야간 카메라와 안정화 짐블 구조 그리고 user interface와 육상원격 조정시스템을 개발 해야 전세계 시장 경쟁력이 있다. 특히, 외국의 경쟁사의 경우는 장비 장비 개발 판매로 인해 경쟁력이 떨어지므로 기존의 선박용 항해 통신 장비 개발 납품의 노화후를 가지고 전체 시스템에 Integration 하는 부분도 개발을 같이 진행하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.69-70
• /
• 2011

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.435-438
• /
• 2012

요즘 모든 분야에서 실세계의 상황정보 인지를 통해 전자공간과 물리공간을 결합할 수 있는 유비쿼터스 컴퓨팅의 기반 기술을 사용하여 센서와 무선 통신 기술을 결합한 무선 센서 네트워크에 대한 연구가 활발히 이루어지고 있는 추세이다. 또한 선박에서도 유무선 기술을 융합하여 지능형 선박에 적합한 Ship Area Network(SAN) 연구가 진행되고 있으나, 다양한 유무선 네트워크 연동 SAN-브릿지 기술, 이종 센서, 제어기기를 자율적으로 구성관리하거나 상호연동, 원격제어 하는 자율 SAN 구성관리 기술 등의 필요성이 제기되고 있는 실정이다. 선박에서의 모니터링 분야인 구조적 안전과 화물 관리를 위한 모니터링 외에도 선원을 포함한 모든 주변 환경을 안전하게 유지하는 것이다. 이에 본 논문에서는 기후 변화에 대한 감지나 여러 구조물에 대한 온도, 압력 등의 모니터링 시스템을 효율적으로 설계하기 위해 무선 센서 네트워크에서의 에너지 효율을 이용한 라우팅 및 데이터 병합을 위한 기술 동향을 파악하고 자기 구성 클러스터링 방법을 분석하여 선내의 무선 센서 네트워크 구성에 대해 연구하였다.

• 대한조선학회논문집
• /
• 제48권6호
• /
• pp.490-500
• /
• 2011

The paradigm that ships are navigated by means of analog navigation devices and caption's experiences is shifted to that ships can be navigated by digital and autonomous navigation systems due to the rapid development of electronics and communication technologies. Hence, all systems deployed in a ship are automated and integrated since corresponding ship systems are not individually operated but integrated and managed under common operating system. In this paper, we overview recent research projects targeted for digitally integrated ships (referred to as digital ships), outline IEC 61162 series, specifying digital interface standards for digital ships, and finally present several issues for further improvement of the IEC 61162 series. In addition, we broadly categorize digital ships into three systems consisting of multiple sub-systems, including a navigation system, a power system, and a automation system in the aspect of operation and function. Corresponding interfacing range and method, as well as interface specification and data types of one system in a digital ship are also described according to sub-systems, respectively.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 Asia Navigation Conference
• /
• pp.71-78
• /
• 2006

The image of an object obtained by the radar is not corresponding to its true shape, because the image of an object observed by the radar is receiving an influence such as multiple-reflections and expanded in bearing because of the beam width of a radar. In addition, a radio wave does not hit the entire surface of an object. Therefore, the image of the front side of a ship facing a radar antenna corresponds to its true shape. In this paper, a method to estimate a ship's shape by means of the integration of the front parts of images obtained from radars is proposed. In addition, a matter, which is observation error of each radar, in using multi-radars, and the process included in the proposed method for solving the matter, are described. As a result of the experiment, the accuracy of about 3 degrees in ship's heading and about 14 meters in length and about 9 meters in beam was obtained.

• 한국CDE학회논문집
• /
• 제18권4호
• /
• pp.299-307
• /
• 2013

Introduction of PLM in domestic shipyards is being retarded as ship PLM has yet to firm up return of investment and process integration. To implement a ship PLM system, it is required to share ship CAD model data in various design and manufacturing environments. Lightweight CAD models provide a promising solution for sharing CAD models in the product life cycle, which can expedite implementation of ship PLM in domestic shipyards in the near future. Compared to proprietary CAD models, it is easy for lightweight CAD models to be interfaced with various application systems and be connected to manufacturing information. In this paper, the reason why lightweight CAD models are necessary to implement a ship PLM system is addressed and current implementation results are introduced.