• Journal of Ship and Ocean Technology
• /
• v.7 no.1
• /
• pp.29-35
• /
• 2003

Intensive experimental investigation has been conducted on the characteristics of model tank with intruded flow. The remaining flow inside tank contribute to the dynamic behavior and further closely related to the stability of vessel as well. To understand the importance of the trapped flow and its dynamic effects a series of systematic tests were conducted using a bench tester that could generate periodic roll motion and also complex motions of combined roll-heave-sway. To accommodate experimental conditions and to create three degree freedom of motions, a bench tester was fabricated and verified. Having similarities in terms of flow trapped inside tank, theoretical approaches for A.R.T. were applied to the study. The major parameters including roll angle, period and flow height were varied in the experiments to obtain the characteristics of model tank.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.857-868
• /
• 2017

The basic safety training for fisheries is being conducted to cope with an emergency situation and prevent the maritime accidents. A new joined person must be educated the safety training and a refresher must be completed the refresher training course every 5 year in according to the STCW-F and seafarers' Act. In order to achieve the objectives of marine safety training, it is necessary to distinguish the trainees by ship's type and the courses should be implemented in consideration of safety equipment of fishing vessels. However, since the classification criteria of seafarers' Act are unclear, the officer of fishing vessels which is over G/T 25 tons has been trained through the same course and curriculum for merchant ship's seafarers. About 80 % of domestically registered fishing vessels are small size ships(less than 100 tons) and there is not many safety equipment required by law. In case of marine accidents such as collision, the small vessel losses its buoyancy and stability caused by damage of hull. despite fisheries fall into the sea during fishing work in bad weather on the deck, there was no safety equipment by law. So fisheries must be trained by a safety training course suitable for fishing vessel. The purpose of this study is to develope the suitable course for fisheries by analysis current curriculum and rules. so suggested the basic safety training course for fisheries and institutional improvement.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.451-466
• /
• 2017

Deep-sea fishing vessel No. 501 Oryong was fully flooded through its openings and sunk to the bottom of the sea due to the very rough sea weather on the way of evasion after a fishing operation in the Bearing Sea. As a result, many crew members died and/or were missing. In this study, a full-scale ship flooding sinking simulation was conducted, and the sinking process was analyzed for the precise and scientific investigation of the sinking accident using highly advanced Modeling & Simulation (M&S) system of Fluid-Structure Interaction (FSI) analysis technique. To objectively secure the weather and sea states during the sinking accident in the Bering Sea, time-based wind and wave simulation at the region of the sinking accident was carried out and analyzed, and the weather and sea states were realized by simulating the irregular strong wave and wind spectrums. Simulation scenarios were developed and full-scale ship and fluid (air & seawater) modeling was performed for the flooding sinking simulation, by investigating the hull form, structural arrangement & weight distribution, and exterior inflow openings and interior flooding paths through its drawings, and by estimating the main tank capacities and their loading status. It was confirmed that the flooding and sinking accident was slightly different from a general capsize and sinking accident according to the simple loss of stability.

• Journal of the Society of Naval Architects of Korea
• /
• v.34 no.4
• /
• pp.1-11
• /
• 1997

When a barge is towed by a tug boat using a tow line, the barge is frequently subject to a large sway motion induced from its inherent yaw motions. This large sway motion combined with external forces due to winds and waves may makes the towing to be difficult or even dangerous. It has been reported that in worse situations, barges or tugs are capsized. In addition, the large sway motion of the towed barge gives a menace to the safety of ships navigating nearby. This paper is the results of the experimental investigation into the course stability of an 8,000 DWT barge using a Towing Tank and a Circulating Water Channel. Various skegs are designed and course stability tests for the barge with skegs are conducted in calm water and in irregular waves. It is observed that an effective skeg attached to the barge enables the sway motion to be zero while the sway amplitude of the bare hull is around 10 times its breadth.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.161-166
• /
• 2011

In this study, design of hull and test of model boat were carried out with electric propulsion small boat driven by photo-voltaic energy. The shape of boat was made with catamaran type by considering the ship's stability, the light-receiving area from solar. According to calculation, when speed of model boat is 5 knots, it was estimated the available power for propulsion with 1.1[hp]. However, the natural energy such as solar energy is strictly dependent upon the climate conditions so the real boat speed is slightly lower than the estimated value.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.27-31
• /
• 2003

Recently, buckling is easy to happen as that High tensile steel that is the thin plate absence is used comprehensively for the structure. Specially, buckling is getting into important design standard in hull construction which use High tensile steel. Therefore, that grasp conduct exactly after buckling is important in stability of hull structure. In this study, examined closely about conduct and secondary buckling after initial buckling of thin plate structure which receive compressive load according to various kinds yield strength under simply supported condition that make by buckling strength formula standard in each payment in advance rule to place that is representative construction of hull in this research. Analysis method is F.E.M by ANSYS and complicated nonlinear behaviour to analyze such as secondary buckling in used arc-length method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.185-188
• /
• 2009

In this paper, Position Controller for balance of Seesaw System design using PID Algorithm. Seesaw System is that it's system use widely to analyze of ship or flight dynamics, Inverted Pendulumand, Robot System, manage system for theory of modern control system and all sorts of analysis. In case of Seesaw System, it's necessity that understand and analysis of system and correct selection of parameter because the system is strong nonlinear control system. It guarantees efficiency and stability to adapt quickly for disturbance or change of controller from PID Algorithm of guarantee safe from simple and long history and PSO(Particle Swarm Optimization) that sort of metaheuristic optimization that need to accuracy and fast PID parameter tuning.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.34-38
• /
• 2003

It has been used many kinds of horizontal butt-welding methods at block-to-block erection stage in shipbuilding companies. For examples, some companies use conventional FCAW process with one side or both sides groove joint welding, others use carriage with torch holder type mechanized welding method. Although lots of efforts were done until now, some problems in quality and productivity still remain in ship's hull welding. In this study, we have attempted to raise productivity and quality on horizontal position of welding with following 3 items. 1) Prepare groove condition with no root gap for making easy fit-up work. 2) Develop improved MAG (100% $CO_2$ gas shielding) welding process with solid wire for making sound root bead from one side. 3) Develop and apply quite new automatic welding carriage. The stability of new welding process was confirmed by conducting mechanical tests of weldments to verify the soundness of weldments.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.83-88
• /
• 2004

Recently, High Tensile Steel is adapt to thin plate on the steel structure and marine structure is used widely. It is possible for buckling happens great. Specially, Initial deflection of ship structure happens in place absence necessarily by heat processing of welding or cutting etc. This Initial Deflection is exerted negative impact when thin plate absence complicated nonlinear behaviour accompanied secondary buckling. As a result, must idealize initial deflection that occurrence is possible to endow stability and accuracy in the hull structure or marine structure and reflect in early structure design considering secondary buckling. Longi direction of compressive load interacts and analyzed finite element series analysis that apply various kinds initial deflection shape measured actually on occasion that is arranged simply supported condition in this research. Applied ANSYS (elasto-plasticity large deformation finite element method) to be mediocrity finite element program for analysis method and analysis control used in Newton-Raphson method ＆ Arc-length method.

• Journal of Navigation and Port Research
• /
• v.40 no.1
• /
• pp.27-34
• /
• 2016

For the prevention of marine casualties, international bodies have mainly focused on strengthening ship's stability and design, maritime education and training, and improving maritime traffic environment. Statistics analysis on marine casualties showed that most of casualties occurred in coastal waters, especially by human elements. In order to review the conformity of existing prevention measures with the result of the statistics analysis, the IMO's SHELL model was applied to the established measures. As a result, ergonomic approaches were needed for the prevention of human errors in coastal waters, so that the priority should be given to the interface between ship's operator and navigational environment. For this study, Rasmussen's SRK pyramid, which showed decision making mechanism of human, and the US Coast Guard's investigation manual on marine casualties concerning the collapse of safe maritime transportation system were reviewed, and the merits and demerits within the risk assessment tools such as IWRAP, PAWSA, ES model, PARK model, and NURI model were also studied. Although the effectiveness of the existing risk assessment models was proved in ports and approaching channels, it is concluded that the need of new models for converting Korean seafarers' qualitative risk to quantitative risk was proposed so as to print hazard maps which make seafarers instinctively recognize comparative hazard levels of coastal waters.