• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.128.1-128.1
• /
• 2016

Nitrided-metal gates on the high-${\kappa}$ dielectric material are widely studied because of their use for sub-20nm semiconductor devices and the academic interest for the evanescent states at the Si/insulator interface. Issues in these systems with the Si substrate are the electron mobility degradation and the reliability problems caused from N defects that permeates between the Si and the $SiO_2$ buffer layer interface from the nitrided-gate during the gate deposition process. Previous studies proposed the N defect structures with the gap states at the Si band gap region. However, recent experimental data shows the possibility of the most stable structure without any N defect state between the bulk Si valence band maximum (VBM) and conduction band minimum (CBM). In this talk, we present a new type of the N defect structure and the electronic structure of the proposed structure by using the first-principles calculation. We find that the pair structure of N atoms at the $Si/SiO_2$ interface has the lowest energy among the structures considered. In the electronic structure, the N pair changes the eigenvalue of the silicon-induced gap state (SIGS) that is spatially localized at the interface and energetically located just above the bulk VBM. With increase of the number of N defects, the SIGS gradually disappears in the bulk Si gap region, as a result, the system gap is increased by the N defect. We find that the SIGS shift with the N defect mainly originates from the change of the kinetic energy part of the eigenstate by the reduction of the SIGS modulation for the incorporated N defect.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.324-326
• /
• 2016

In this study, we have investigated indium tin zinc oxide (ITZO) as an active channel for non-volatile memory (NVM) devices. The electrical and memory characteristics of NVM devices using multi-stack gate insulator SiO2/SiOx/SiOxNy (OOxOy) with Si-rich SiOx for charge storage layer were also reported. The transmittance of ITZO films reached over 85%. Besides, ITZO-based NVM devices showed good electrical properties such as high field effect mobility of 25.8 cm2/V.s, low threshold voltage of 0.75 V, low subthreshold slope of 0.23 V/dec and high on-off current ratio of $1.25{\times}107$. The transmission Fourier Transform Infrared spectroscopy of SiOx charge storage layer with the richest silicon content showed an assignment at peaks around 2000-2300 cm-1. It indicates that many silicon phases and defect sources exist in the matrix of the SiOx films. In addition, the characteristics of NVM device showed a retention exceeding 97% of threshold voltage shift after 104 s and greater than 94% after 10 years with low operating voltage of +11 V at only 1 ms programming duration time. Therefore, the NVM fabricated by high transparent ITZO active layer and OOxOy memory stack has been applied for the flexible memory system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.1
• /
• pp.245-251
• /
• 2015

In this paper, we present a design of PWM-controlled driving device for backlights in LED systems. The system can control either the brightness of the entire screen of backlights of LCD driven by LED or illumination or contrast of each partial segment of the entire screen. The PWM-controlled driving device includes the shift register that shifts the series data according to the clock signal prior to the generation of parallel data. It is also is comprised of a number of registers, a number of counters, a number of comparators, and a number of synchronizing gates (producing the PWM-controlled signals). The proposed device for backlights in LED systems can generate the PWM-controlled signal with a high degree of resolution without the increase of clock frequency. It also contains the PWM-controlled circuit that disperses and restrains the quantized noise.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.4
• /
• pp.40-48
• /
• 2016

The engineering knowledge and technology is core driving forces of continuous growth in knowledge based society. Companies, the government, and universities are the subjects of an innovation and the cooperation between them is very important. Nowadays, the main purpose of industry-university cooperation moves to train experts and develop a new product. A shift of the paradigm came from the change of recognition that the final consumers of the program are companies and the universities are supporters of the program. In this paper, we investigate the purpose, participation and satisfaction of companies to industry-academy technology cooperation through empirical studies. The need to expert training, product development and process development makes companies participate industry-academy technology cooperation and companies have different purpose of participation by the business type. Companies often feel that expert training, subsidiary purpose of industry-academy technology cooperation, is more important than product development or process development. This result is caused by the real world environment of small and mid-size companies, lacking of technology experts. The participation of companies to each technology cooperation program (technology transfer, joint technology development, consigned technology development, technology consulting, co-op. lab.) is also different by business type. The companies' satisfaction with the purpose of process development is relatively higher than that with the purpose of product development and companies show also different satisfaction value by business type and participating program. The results of this study can give a contribution to the design of demand oriented industry-academy technology cooperation model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.125-133
• /
• 2016

As one of solutions to pursue the efficient use of spectrum resource, we proposed the methodology for the co-channel multi-site radar operations with the synchronous GPS clock. The proposed algorithm, based on a quasi orthogonal property, find a candidate set of the time shifted linear frequency modulation(TSLFM) signals with the minimum acceptable level of the correlation among selected TSLFM signals. To check suggested algorithm, numerical analysis for several radars operating in the same channel with a sawtooth waveform has been performed by using range-Doppler processing for the given system parameters, and computational results are presented and examined in terms of range profile and doppler shift for a targets with velocity and distance. Simulated results have a good agreement with assumed target distance and its velocity, within the error of resolution.

• Journal of Digital Convergence
• /
• v.13 no.10
• /
• pp.33-40
• /
• 2015

Today the computerization in overall civil life is globally progressing, and software plays a central role in all interdisciplinary areas of society. These changes of information environments lead to the change of values and paradigm shift, and the change of Korean educational policies is also happening. As human-machine interaction is becoming ubiquitous, code literacy is going to play an important role before long. Despite these transitions, information education in universities in Korea focuses on just driving application programs. In this paper, we explore overall educational system and curriculum of universities in Korea. And we present educational factors corresponding to educational levels and contents. Presented five factors coupling three educational contents and three educational levels may be dedicated to design curriculum.

• Journal of Internet of Things and Convergence
• /
• v.6 no.1
• /
• pp.97-102
• /
• 2020

Multi-Channel Switch ICs for IoT have integrated several solid state structure low ON-resistance bi-directional relay MOS switches with level shifter to drive high voltage and they should be independently controlled by external serialized logic control. These devices are designed for using in applications requiring high-voltage switching control by low-voltage control signals, such as medical ultra-sound imaging, ink-jet printer control, bare board open/short and leakage test system using Kelvin 4-terminal measurement method. This paper describes implementation of analog switch control block and its verification using Field programmable Gate Array (FPGA) test pattern generation. Each block has been implemented using Verilog hardware description language then simulated by Modelsim and prototyped in a FPGA board. Compare to conventional IC, The proposed architecture can be applied to fields where multiple entities need to be controlled simultaneously in the IoT environment and the proposed pattern generation method can be applied to test similar types of ICs.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.509-517
• /
• 2001

Full-search algorithm requires large amount of computation which causes time delay or very complex hardware architecture for real time implementation. In this paper, we propose a fast motion estimator based on bit-plane matching, which reduce the computational complexity and the hardware cost. In the proposed motion estimator, the conventional motion estimation algorithms are applied to the binary images directly extracted from the video sequence. Furthermore, in the proposed VLSI motion estimator, we employ a Pair of processing cores that calculate the motion vector continuously By controlling the data flow in a systolic fashion using the internal shift registers in the processing cores, we avoid using SRAM (local memory) so that we remove the time overhead for accessing the local memory and adopt lower-cost fabrication technology. We modeled and tested the proposed motion estimator in VHDL, and then synthesized the whole system which has been integrated in a 0.6-$\mu$m triple-metal CMOS chip of size 8.15 X 10.84$\textrm{mm}^2$.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.775-778
• /
• 2008

Augmented Reality is a growing area in virtual reality research, The world environment around us provides a wealth of information that is difficult to duplicate in a computer. This evidenced by the worlds used in virtual environments. An augmented reality system generates a composite view for the user. It is a combination of the real scene viewed by the user and a virtual scene generated by the computer that augments the scene with addition information. The registration method represent to the user enhances that person's performance in and perception of the world. It decide the direction and location between real world and 3D graphic objects. The registration method devide two method, Model based tracking and Move-Matching. This paper researched at to generate a commerce correlation using a tracking object method, using at a color distribution and information, in the sequence scene.

• Korean Journal of Social Welfare
• /
• v.65 no.4
• /
• pp.271-294
• /
• 2013

This study aims to grasp a slice of development of Korean Social Welfare. For this study, a character critique has been conducted on Kim, Man-doo who had been superbly equiped by social work practice and study as well. The accomplished critique came from literature criticism is based on his social work practice and his literatures. Five and six themes have been elicited each from Kim's social work practice and his literatures. Through the association of those two kinds of themes has been finally reasoned out another five themes; emphasis on integrated approach, encompassment of social welfare from America and Japan, virtuous cycling formation of Social Welfare, paradigm shift of Social Welfare, and regrettable unfinished harmony of practice and study. In regards to the results, some subjects are discussed as follows; Kim's social work practice had been refined crossing the social welfare system, a slice of Korean social welfare in 1960-90s was exposed, children-based social work practice in 1960s had been practiced unitedly, and Korean Social Welfare in 1960-80s had been structured differently according to the scholars'inclination.