• 품질경영학회지
• /
• 제36권3호
• /
• pp.34-44
• /
• 2008

This research proposes a design method based on the statistical characteristics of the Shewhart control chart incorporated with 2 of 2 and 2 of 3 runs rules respectively. A Markov chain approach is employed in order to calculate the in-control and out-of-control average run lengths(ARL). Two different control limit coefficients for the Shewhart scheme and the runs rule scheme are derived simultaneously to minimize the out-of-control average run length subject to the reasonable in-control average run length. Numerical examples show that the statistical performance of the hybrid control scheme are superior to that of the original Shewhart control chart.

• 산업경영시스템학회지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2002

Statistical process control is used widely as an effective tool to solve the quality problems in practice fields. All the control charts used in statistical process control are parametric methods, suppose that the process distributes normal and observations are independent. But these assumptions, practically, are often violated if the test of normality of the observations is rejected and/or the serial correlation is existed within observed data. Thus, in this study, to screening process, the Combined Shewhart - CUSUM quality control chart is described and evaluated that used bootstrap method. In this scheme the CUSUM chart will quickly detect small shifts form the goal while the addition of Shewhart limits increases the speed of detecting large shifts. Therefor, the CSC control chart is detected both small and large shifts in process, and the simulation results for its performance are exhibited. The bootstrap CSC control chart proposed in this paper is superior to the standard method for both normal and skewed distribution, and brings in terms of ARL to the same result.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2012년 추계학술대회
• /
• pp.445-451
• /
• 2012

제조공정에서 사용되어지는 SPC(Statistical Process Control)관리 기법은 가피원인을 탐지하여 변동을 감소시키는 통계적 공정관리 시스템이다. SPC의 대표적인 관리기법으로는 Shewhart관리도, Cusum관리도, EWMA관리도가 있으며 이러한 관리 기법들은 공정을 보다 안정적으로 관리 할 수 있도록 유지 및 예측하는데 사용 되어 진다. 본 논문에서는 일반적으로 사용되어 지는 Shewhart관리도와 공정 예측에 유리한 EWMA 관리도에 대해 연구해보고 공정변화에 민감하게 반응하는 EWMA 관리도의 적용 사례를 제시하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제26권4호
• /
• pp.1027-1034
• /
• 2015

A control chart is very useful in monitoring various production process. There are many situations in which the simultaneous control of two or more related quality variables is necessary. When the joint distribution of the process variables is multivariate normal, multivariate Shewhart control charts using the function of the maximum likelihood estimator for monitoring the dispersion matrix are considered for the simultaneous monitoring of the dispersion matrix. The performances of the multivariate Shewhart control charts based on the proposed control statistic are evaluated in term of average run length (ARL). The performance is investigated in three cases, where the variances, covariances, and variances and covariances are changed respectively. The numerical results show that the performances of the proposed multivariate Shewhart control charts are not better than the control charts using the trace of the covariance matrix in the Jeong and Cho (2012) in terms of the ARLs.

• Journal of the Korean Data and Information Science Society
• /
• 제23권3호
• /
• pp.617-626
• /
• 2012

Multivariate Shewhart control charts are considered for the simultaneous monitoring the variance-covariance matrix when the joint distribution of process variables is multivariate normal. The performances of the multivariate Shewhart control charts based on control statistic proposed by Hotelling (1947) are evaluated in term of average run length (ARL) for 2 or 4 correlated variables, 2 or 4 samples at each sampling point. The performance is investigated in three cases, that is, the variances, covariances, and variances and covariances are changed respectively.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2011년도 춘계학술대회
• /
• pp.675-693
• /
• 2011

We compare three Techniques control systems with The Investigate Study on the relation between Multivariate SPC and Autoregressed Algorithm. We also investigate Autoregressed Algorithm with relevant EWMA, CUSUM, Shewhart chart, Precontrol chart and Process Capacity.

• Journal of the Korean Data and Information Science Society
• /
• 제28권2호
• /
• pp.339-348
• /
• 2017

전통적인 통계적 공정관리에서 품질특성치의 위치모수와 척도모수의 변화를 탐지하는 것은 주된 관심사였고, 이를 위해 일반적으로 두 개의 관리도를 병행하여 사용한다. 그러나 하나의 관리도를 사용하여 두 모수의 변화를 동시에 탐지하는 절차에 대한 연구도 많이 진행되어 왔다. 하나 또는 두 개의 관리도를 사용할 때, 제1국면 (phase I)을 통하여 모수를 추정하여 관리한계를 설정하여 제2국면(phase II)의 관리도를 운영하는데 이때 정규성 가정의 만족 여부는 아주 중요한 점검 사항이다. 실제 공정에서는 종종 분포에 대한 가정을 하기 어렵거나 정규분포를 따른다고 가정하기 어려운 경우가 있는데, 이러한 경우에는 비모수적 관리도를 사용할 수 있다. 이 논문에서는 비모수적 관리도이면서, 하나의 관리도를 사용하여 위치모수와 척도모수의 변화를 탐지하는 Shewhart-Lepage 관리도를 소개하고, 위치모수와 척도모수가 동시에 변화할 때 진단 단계에서 변화의 원인을 가장 정확하게 진단할 수 있는 최적의 진단한계를 모의실험을 통해 제시하고 그 효율에 대해 연구하였다.

• 한국산업정보학회논문지
• /
• 제7권4호
• /
• pp.53-58
• /
• 2002

이 논문에서 개별 관측치를 이용한 Shewhart 관리도와 CRL 관리도로 이루어지는 수정된 합성 관리도를 구성한다. Shewhart X 관리도를 적용하여 관리한계선을 벗어나지 않으면 CRL 관리도를 적용하여 한 번 더 공정의 이상유무를 판단하는 2중 감지 공정관리기법을 고려한다. 합성 관리도에서 공정변화를 지적하는 감지력으로 평균 런의 길이()를 이용한다. 논문에서 제안된 수정된 합성 관리도는 We와 Spedding(2000a)이 제안한 합성 관리도와 Shewhart X 관리도보다 우수하며, EWM 관리도와는 성능면에서 매우 유사하다. 또한 공정변화가 0.75$\sigma$보다 클 때는 수정된 합성 관리도가 우수하다는 것을 확인할수 있다. 제시된 X-CRL 관리도를 평가하기 위해 조건부 확률을 계산하여 기존의 관리도와 비교한다.

• 산업경영시스템학회지
• /
• 제35권4호
• /
• pp.118-125
• /
• 2012

When monitoring an instrumental process, one often collects a host of data such as characteristic signals sent by a sensor in short time intervals. Characteristic data of short time intervals tend to be autocorrelated. In the instrumental processes often the practice of adjusting the setting value simply based on the previous one, so-called 'adjacent point operation', becomes more critical, since in the short run the deviations are harder to detect and in the long run they have amplified consequences. Stochastic modelling using ARIMA or AR models are not readily usable here. Due to the difficulty of dealing with autocorrelated data conventional practice is resorting to choosing the time interval where autocorrelation is weak enough then to using I-MR control chart to judge the process stability. In the autocorrelated instrumental processes it appears that using the Shewhart chart and the time interval data where autocorrelation is relatively not existent turns out to be a rather convenient and very useful practice to determine the process stability. However in the autocorrelated instrumental processes we intend to show that one would presumably do better using the EWMA control chart rather than just using the Shewhart chart along with some arbitrarily intervalled data, since the former is more sensitive to shifts given appropriate weights.

• Journal of the Korean Statistical Society
• /
• 제33권2호
• /
• pp.219-231
• /
• 2004

Process adjustment is a complimentary tool to process monitoring in process control. Although original intention of process adjustment is not identifying a special cause, detection and elimination of special causes may lead to significant process improvement. In this paper, we examine the impact of special causes on process adjustment. The bias in the adjusted output process is derived for each type of special causes, and average run length (ARL) of the Shewhart chart applied to the adjusted output is computed for each special cause types. Numerical results are illustrated for the ARL of the Shewhart chart, thereupon seriousness of special causes on process adjustment is evaluated for each type of special causes.