• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.126-133
• /
• 2004

As the automation of ship production system proliferates, it is unavoidable to move the real machinery, facility, application software, and virtual environment from the heterogeneous data environment to the integrated one. However, it is a prevailing situation that each component operates under the different environment, due to the inability of interchanging the data in a structured manner between the components. The issue is obstacles to improvement of the application system. To facilitate seamless exchange of data among the manufacturing systems, STEP, PDML, and XML has been tried by other studies. This study has investigated how XML data can be applied to exchange the data among the ship production system components. XML data is applied to the forming shop in shipyard to overcome the present difficulties on sharing and exchanging of the information. An example of forming information is represented by XML to demonstrate the feasibility of the proposed approach. In addition, an application of XML information applicable to virtual factory and electronic work order sheet is included.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.478-481
• /
• 1997

A technique or the preparation of porous polyurethane vascular prostheses was investigated. Small-diameter vessels are not in general clinical use due to their limited long-term biocompatibility and low patency rates in experimental trial. These limits are mainly due to the failure of mechanical unction of the vascular grafts. This failure has been suggested to result partially from compliance mismatch. The long-term patency is considered to depend critically on the properties of the material and the fabrication process of the graft. So the control of pores is very important and main points to develop a available vascular grafts. Two-kind polymer sheets was compared. One was the porous PU-sheet made at room temperature by the solvent/non-solvent exchange. And the other was the porous PU-sheet which was fabricated by thermal phase transition and solvent-/non-solvent exchange using the thermal controller. The polymer sheets had a uniform pore size and pore occupation. According to the result of the above experiments, polyurethane solution was injected into a mold designed or U-type tube. The average pore size and pore occupation were easily changed by changing polyurethane concentration, freezing temperature, and methods. This technique can give a proper pore size ($10{\sim}45\;{\mu}m$) or tissue in growth, and suitable compliances or matching with arteries and veins. Besides, the fabrication of more complicated shaped vessels such as the U-type vascular grafts is easily controlled by using the fixed mold. this method might give a desired compliant graft or artificial implantation with the presently valid medical polymers.

• BMB Reports
• /
• v.40 no.1
• /
• pp.58-64
• /
• 2007

Similar to the other known structures of Bacillus thuringiensis Cry $\delta$-endotoxins, the crystal structure of the 65-kDa activated Cry4Ba toxin comprises three domains which are, from the N- to C-terminus, a bundle of $\alpha$-helices, a three-$\beta$-sheet domain, and a $\beta$-sandwich. To investigate the properties of the C-terminal domain III in isolation from the rest of the toxin, the cloned Cry4Ba-domain III was over-expressed as a 21-kDa soluble protein in Escherichia coli, which cross-reacted with anti-Cry4Ba domain III monoclonal antibody. A highly-purified domain III was obtained in a monomeric form by ion-exchange and size-exclusion FPLC. Circular dichroism spectroscopy indicated that the isolated domain III fragment distinctly exists as a $\beta$-sheet structure, corresponding to the domain III structure embodied in the Cry4Ba crystal structure. In vitro binding analysis via immuno-histochemical assay revealed that the Cry4Ba-domain III protein was able to bind to the apical microvilli of the susceptible Stegomyia aegypti larval midguts, albeit at lower-binding activity when compared with the full-length active toxin. These results demonstrate for the first time that the C-terminal domain III of the Cry4Ba mosquito-larvicidal protein, which can be isolated as a native folded monomer, conceivably participates in toxin-receptor recognition.

• Journal of Distribution Science
• /
• v.12 no.5
• /
• pp.27-32
• /
• 2014

Purpose - Since Iran's economy is only now developing, and its stock market is only now emerging, we should deal with the relationship between ownership structure and conservative accounting of companies to see whether such a relationship exists in Iran's market. This study aims to investigate the relationship between ownership structure and accounting conservatism of listed companies on the Tehran Stock Exchange. Research design, data, and methodology - All listed companies on the Tehran Stock Exchange, for which the required information financial statements (balance sheet, profit and loss account) could be acquired for the period 2007-2012, were studied. A total of 123 companies from various industries was selected. Results - In order to test the hypotheses, multi variate regression (inter procedure), with their meaningful t- and f-statistics, and a Durbin-Watson autocorrelation model were used. Conclusions - The research results show that the ownership of major shareholders and ownership concentration have a negative significant relationship with accounting conservatism. Therefore, as a significant negative relationship between concentration of ownership and accounting conservatism at the 95% confidence level was found, the second hypothesis was confirmed.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.11
• /
• pp.13-22
• /
• 2020

This research explores the appropriate rubber pricing model and the consistent empirical evidence. This model has been derived from the utility function and firm profit-maximization model of commodity goods. The finding shows that the period t - 1 affects expected commodity price and expected profit of commodity production. In fact, a change in the world price of rubber in the past period led to a change in the expected price of rubber in the short run which influenced the expected rubber profit. As a result, the past-period free on board price has an entirety effect on expected farm price of rubber given an exchange rate. In addition, the rubber pricing model indicates that the profit of local farmer on rubber plant depends solely on the world price of rubber in the short run in case of Thailand. In an empirical study, it was found that a change in the price of ribbed smoke sheet 3 in Singapore Commodity Exchange significantly and positively determined the fluctuation of rubber price at the farm gate in Thailand which was consistent with the behavior of the Thai farmers. Both prices are also cointegrated in the long run. That is, the result states that the VECM is an appropriated pricing model for forecasting the farm price in Thailand.

• Journal of Korea Multimedia Society
• /
• v.24 no.11
• /
• pp.1567-1579
• /
• 2021

This study describes a multicultural literacy program that can nurture multicultural people who can live in a multicultural society. A total of 10 20-hour programs were conducted for 22 youths in Busan. Through this, the current perception and acceptance of multiculturalism among young people in Busan was investigated, and a curriculum suitable for multicultural awareness, multicultural acceptance, and multicultural competency enhancement was constructed. In accordance with the goal of strengthening the multicultural competency required for multicultural activists through education, learners can exchange opinions through the activity sheet, so that learners can know the difference between themselves and others. Students could learn about each other's culture and values through cultural exchange with others, and through teachers with diverse cultures, they could learn various perspectives and cultures about culture and values. Through the results of the multicultural literacy program, I would like to suggest three methods of multicultural literacy education to strengthen multicultural competence in a multicultural society. Therefore, efforts should be made to develop various multicultural education courses to strengthen the multicultural capabilities of Koreans.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2446-2456
• /
• 1993

By virtue of progress of computer science, CAD/CAM technology has been developed greatly in each area. But the problems in the integration of CAD/CAM are not yet solved completely. The reason is that the exchange of data between CAD and CAM is difficult because the domains of design and manufacturing are different in nature. To solve this problem, a feature based modeller is developed in this study, which makes it possible to communicate between design and manufacturing through features. The modeller has feature, the concept of semi-bounded plane is introduced, and implemented as a B-rep sheet model using half-edge data structure. The features are then created on a part by local modification of the boundary on a part based on feature template information. This approach generalizes the modelling of features in a geometry model.

• Journal of the Korean Magnetic Resonance Society
• /
• v.24 no.2
• /
• pp.38-42
• /
• 2020

WW domains are small protein modules consisting of three-stranded antiparallel β-sheet, and involved in the protein-protein interaction for various biological systems. We overexpressed and purified WW2 domain from human AIP4/Itch (a member of Nedd4 family) using a pH/temperature dependent cleavage system. The backbone assignments of WW2 domain were completed, and secondary structure was predicted. Furthermore, backbone flexibility of WW2 domain was determined by ¹H-¹⁵N heteronuclear NOE and amide hydrogen exchange experiments. The structural information would contribute to the structural determination of WW2 domain as well as the interaction study of WW2 domain with various binding partners.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.141-145
• /
• 2008

Because of world financial crisis, The Korea domestic construction industry has been damaged hugely on material supplying work. A current domestic material supply system can't react properly on a great rise of foreign exchange rate and raw material price, so the system has a problem which is not properly supplying material. To solve this problem, a more innovative material supply work system is seriously needed than ever. So this study wants to improve material supply system for supplying material right time, right place through applying a web-based system. Applying this, overall process of material-supply-work can be done on a web-based system for immediately understanding change of ordering and warehousing by material-supply-schedule to a domestic construction field.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1601-1604
• /
• 2003

This paper describes a split operation for generation of core and cavity plates of an injection mold for a pseudo-solid model of a plastic part. Here, a pseudo-solid model means a sheet model that looks like a solid model. but whose boundary is not closed. When a solid model created in a different CAD system is imported through standard data exchange format, a pseudo-solid model is created in most cases as tolerance or some other problems make sewing operation failed. As most existing mold design system based on solid modeling kernels require a complete part solid model, mold designers have to do time-consuming healing operations to convert a pseudo-solid to solid. The essential capability of mold design system is the split operation for generation of core and cavity plates. Thus. we developed a split operation for pseudo-solid part model to eliminate or reduce healing preprocessing for mold design.