• Journal of Korea Water Resources Association
• /
• v.51 no.8
• /
• pp.665-676
• /
• 2018

Interrill erosion on a hillslope results from the combined action of the detachment of soil particles by raindrop impact and the sediment transport of surface runoff. This study newly defined the rainfall power which detaches soil particles and the sheet-flow power contributed to sediment transport in terms of energy expenditure rate of soil erosion and presented the effective power equation for interrill erosion by rainfall-induced sheet flow. The rainfall and sheet-flow power was evaluated by factors related with rainfall, slope, and runoff and coefficients of the power equation were analyzed based on references. Futhermore it was confirmed that the relative scales between the rainfall power and the sheet-flow power according to rainfall intensity reflect on the hydrological response and physical process of interrill erosion. From application of the field data for surface runoff and soil erosion it was verified that the rainfall and sheet-flow power is an appropriate equation to estimate a interrill erosion.

• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.637-647
• /
• 2010

The Universal Soil Loss Equation (USLE)-based modeling systems have been widely used to simulate soil erosion studies. However the GIS-based USLE modeling systems have limitation in gully erosion evaluation which is one of the most important factor in soil erosion estimation. In this study, the integrated soil erosion evaluation system using with Sediment Assessment Tool for Effective Erosion Control (SATEEC) system, nLS and Unit Stream Power-based Erosion/Deposition (USPED) model was developed to simulate gully erosion. Gully head location using nLS model, USPED for gully erosion, and the SATEEC estimated sheet and rill erosion were evaluated and combined together with the integrated soil erosion evaluation system. This system was applied to the Haean-myeon watershed, annual average sediment-yield considering sheet, rill and gully erosion was simulated as 101,933 ton/year at the study watershed. if the integrated soil erosion evaluation system is calibrated and validated with the measured data, this system could be efficiently used in developing site-specific soil erosion best management system to reduce soil erosion and muddy water inflow into the receiving waterbody.

• Journal of Korea Water Resources Association
• /
• v.55 no.4
• /
• pp.291-300
• /
• 2022

Artificial disturbance in mountainous areas increases the sensitivity to erosion by exposure of the subsoil with a low loam ratio to the surface. In this study, rainfall simulations were conducted to evaluate the erodibility of sand and loamy sand in the interrill erosion by the rainfall-induced sheet flow. The mean diameters of sand and loamy sand used in the experiment were 0.936 mm and 0.611 mm, respectively, and the organic matter content was 2.0% and 4.2%, respectively. In the experimental plot, the runoff coefficient of overland flow increased 1.16 times in loamy sand rather than sand. Mean sediment yields of loamy sand and sand by sheet erosion were 3.71kg/m²/hr and 1.13kg/m²/hr respectively. The erodibility, the rate of soil erosion for rainfall erosivity factor, was 3.65 times greater in loamy sand than in sand. As the gradient of the steep slope increased from 24° to 28°, the sediment concentration and the erodibility for two soils increased by about 20%. The erodibility factor K of sandy soils for small plots was overestimated compared to the measured erodibility. This means that RUSLE can overestimate the sediment yields by sheet erosion on sandy soils.

• Journal of Korea Water Resources Association
• /
• v.48 no.7
• /
• pp.595-604
• /
• 2015

Interrill erosion by the rainfall is divided into a detachment of soil particles by raindrop splash when raindrops having kinetic energy strike on the surface soil and a sediment transport by sheet flow of surface runoff. Rainfall kinetic energy is widely used as an indicator expressing the potential ability to separate the soil particles from soil mass. In this study, the soil erosion experiments of rainfall simulation were operated to evaluate the effects of rainfall kinetic energy on interrill erosion as using the strip cover to control raindrop impact. The kinetic energy from rainfall simulator was 0.58 times to that of natural rainfall. Surface runoff and subsurface runoff increased and decreased respectively with increase of rainfall intensity. Surface runoff discharge from plots of non-cover was 1.82 times more than that from plots with cover. The rainfall kinetic energy influenced on the starting time of surface and subsurface runoff. Soil erosion quantity greatly varied according to existence of the surface cover that can intercept rainfall energy. Sediment yields by the interaction between raindrop splash and sheet flow increased 3.6~5.9 times and the increase rates of those decreased with rainfall intensity. As a results from analysis of relationship between stream power and sediment yields, rainfall kinetic energy increased the transport capacity according to increase of surface runoff as well as the detachment of soil particles by raindrop splash.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.136-146
• /
• 2017

We selected 6 plots ($100m^2$) located 2.2-3.8 km from Minamidake Crater on the north flank of Sakurajima Volcano. We conducted a field study to investigate the effects of volcanic activity on vegetation succession and surface erosion rate. The results showed that trees growing in plots further from the crater had a greater diameter at breast height (DBH), total height, and age. In addition, these plots had a greater number of woody plants and species, as well as a greater total cross-sectional area at breast height. The Fisher-Williams index of diversity (${\alpha}$) and the proportion of evergreen broad-leaved trees were higher in plots located further from the crater. Vegetation succession in these plots was not at the level of a climax forest. From 1972 to 2015, the timing for active volcano, the depth of volcanic ash layer, the dry density, and the pH of ground surface were lower for plots located further from the crater. Furthermore, the average annual sheet erosion from 1972 to 2015 was also lower for plots located further away from the crater. Overall, plots further away from the crater have a better environment for vegetation growth and a lower dry density of the volcanic ash surface layer. It is thought that lower dry density results in increased soil permeability, which impedes surface flow. In order to prevent debris-flow disasters, caused by mud and rock flow resulting from impaired soil penetrability, it is essential to promote soil development and restore penetrability by artificial vegetation restoration.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.2
• /
• pp.101-106
• /
• 1999

The main consideration factor to design a magnetron of the sputtering system for TFT-LCD metallization is high sheet resistance (Rs) uniformity which is provided by the high target erosion and high current efficiency. The present study has developed a rectangular magnetron for TFT-LCD to bve considered full target erosion and high film uniformity. After an aluminum-2 at.% and alloy target was installed in a magnetron source and the film was deposited on the glass of 600${\times}$720 mm, the Rs uniformity of the deposited film was measured as functions of the magnet tilt and magnet scanning configuration. And the target erosion profile was observed with the target voltage. When sputtered at 4mtorr and 10kW, the magnet tilt for the high Rs uniformity of 8.38% was 7mm. The plasma voltage at the dwell home and end for full-face target erosion, when scanned the magnetron was 120% compared to the mean voltage of the other area.

• Journal of Korea Water Resources Association
• /
• v.30 no.6
• /
• pp.661-669
• /
• 1997

This paper presents a theoretical analysis for a velocity profile of fluid-granule mixed flow and a sheet erosion of an embankment having noncohesive materials due to overflow. The velocity profile were obtained using the stress-strain relationships based on a grain-inertia regime and an erosion depth was obtained using dynamic Coulomb criterion. Experiments were performed to compare with theoretical values and fairly good agreements were found. Theoretical results on velocity profiles, which can be applied to any type of velocity profiles in a fluid-granule mixed flow, showed a considerable improvement for the existing theories on a debris flow. for a design purpose, formulas and figure diagrams for obtaining a velocity profile, an erosion depth, an overflow depth and a granular discharge were proposed for given values of a flood discharge, particle properties and embankment scale.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.82-89
• /
• 1997

A physically-based soil-water erosion model with simple hydrology and Rose & Hairsine's erosion concept is described, and was implemented in the form of computer program. The model derived from the concept of stream power(Bagnold, 1977) considers settling velocity characteristics of the soil and distinguishes between the processes of entrainment and re-entrainment. It deals separately with rill flow and sheet flow, handles vegetation in terms of soil contact cover, and has the ability to simulate soil movement on nonuniform slopes. The model predicted sediment concentrations reasonably with the results of Mclsaac et al. (1990). It showed a capability to quantitatively predict the movement of soil on uniform and nonuniform slopes. Among the model parameters, soil depositability $({\phi})$ was the most sensitive from the sensitivity analysis.

• Journal of Advanced Marine Engineering and Technology
• /
• v.26 no.1
• /
• pp.99-107
• /
• 2002

Recently all kinds of structural materials are subjected to the severe corrosive environment. Especially corrosion problems of heat exchanger such as galvanic corrosion, erosion and cavitation raised by both contaminated solution and high velocity of fluid to increase cooling effect of heat exchanger have been frequently reported in these days. In this study two kinds of sheet materials and five kinds of tube materials are used for galvanic corrosion characteristics and their corrosion current density calculation. The tube materials having the most galvanic corrosion resistance between tube and sheet of heat exchanger were Al Brass(68700) and Al Brass(C6872TS) and although Ti tube predominantly indicated the highest individual corrosion resistance among those five tube materials. it appeared that Ti tube can be allowed as sheet materials to get galvanic corrosion easily. However it is considered that Cu-Ni tube materials is not only easy to produce galvanic corrosion significantly between tube and sheet regardless of kinds of sheet materials but also is appeared considerably its own high corrosion current density

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.605-609
• /
• 2010

기상변화와 지구온난화로 인해 국지성 호우의 강도와 빈도가 늘어나고 있으며 이로 인해 소양강, 도암댐, 임하댐 유역의 탁수 문제 등, 토양 유실에 관한 문제가 심각해지고 있다. 정확한 토양 유실 모의를 위하여 지난 수 십 년간 Universal Soil Loss Equation(USLE) 등의 모형이 사용되었지만 이러한 모형들에 관한 연구 중 강한 집중 호우에 의해 발생하는 걸리 침식(Gully Erosion)을 적용한 경우는 많지 않다. 이에 본 연구에서는 걸리 침식을 고려한 토양 유실량 및 유사량 산정을 위하여 입력자료가 간단하고 ArcView GIS를 기반으로 융합이 가능한 Sediment Assessment Tool for Effective Erosion Control (SATEEC) system, nLS, Unit Stream Power-based Erosion/Deposition (USPED) 연계 모형을 개발하여 강원도 양구군 해안면 유역에 적용하였다. 기존 SATEEC system에서는 강우 시 유역에서 발생하는 면상 침식(Sheet Erosion), 세류 침식(Rill Erosion)의 모의만이 가능하였지만, 본 연구에서 개발한 연계모형에서는 nLS 모형을 이용한 걸리 헤드 발생 지역 선정과 USPED 모형을 이용한 걸리 발생 지역에서의 토양 유실량 산정이 가능하기 때문에, 걸리 침식을 고려한 토양 유실량 산정이 가능하다. 연계 모형의 모의 결과 해안면 유역의 최종 유출구에서 발생하는 평균 유사량은 101,933 ton/year 로 산정 되었다. 토양 유실량과 유사량을 모의함에 있어, 면상, 세류, 걸리 침식을 종합적으로 고려해야 실제 지형에서 발생하는 토양 유실량 및 유사량을 좀 더 정확하게 예측할 수 있을 것이며, 본 연구에서 개발된 연계 모형을 이용한다면 실제 유역에서 발생하는 여러 형태의 토양 유실을 모의 할 수 있을 것이라 판단된다.