• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.679-684
• /
• 2011

Recently, STS 301L joints of side panels to frames for stainless steel rolling stock have been made out by using existing welding methods including Resistance Spot Welding, Laser Welding and Arc Welding. Most of the processes were jointed by spot welding because it is faster at welding and comparatively less expensive for investment in welding facilities than other methods. During spot welding, however, indentation of the metal surface was made due to pressure and melting property of welding. Moreover, since the melting metal was forced to periphery of the plate as indentation was made, sheet separation, which cracked apart between jointed sheets, was carried out. A slight deformation which resulted from sheet separation deteriorated the emotional quality of railway vehicles. This paper suggests that by processing conventional spot electrode tip appropriately, melting metal is able to push up around the processed part (Hollow Spot Electrode Tip) and prevent from being dislodged from first place to periphery. Consequently, sheet separation is remarkably decreased. Also, the emotional quality of appearance of stainless steel rolling stock is enhanced considerably.

• 한국정밀공학회지
• /
• 제10권2호
• /
• pp.104-113
• /
• 1993

Characteristics of fiber-reinforced thermoplastic sheet depend on the quantity and shape of fibers. During a molding process of composites, the fiber-maxtrix separation and fober orientation are caused by the flow during the molding process. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation-orientation and molding conditions. The correlation between the separation and the orientation have to be clarified for designing the fiber structure. In this paper, the degree of nonhomogeneity which is a measure of the separation is obtained using one-dimensional rectangular shaped part compression molding. And the orientation function is defined and measured by the image processing using soft X-rayed photograph and image scammer. Correlation between the degree of nonhomogeneity and the orientation function is discussed.

• ETRI Journal
• /
• 제46권4호
• /
• pp.697-707
• /
• 2024

Music identification is widely regarded as a solved problem for music searching in quiet environments, but its performance tends to degrade in TV broadcast audio owing to the presence of dialogue or sound effects. In addition, constructing an accurate dataset for measuring the performance of background music monitoring in TV broadcast audio is challenging. We propose a framework for monitoring background music by automatic identification and introduce a background music cue sheet. The framework comprises three main components: music identification, music-speech separation, and music detection. In addition, we introduce the Cue-K-Drama dataset, which includes reference songs, audio tracks from 60 episodes of five Korean TV drama series, and corresponding cue sheets that provide the start and end timestamps of background music. Experimental results on the constructed and existing datasets demonstrate that the proposed framework, which incorporates music identification with music-speech separation and music detection, effectively enhances TV broadcast audio monitoring.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.165-166
• /
• 2014

The Composite waterproofing began to rise gradually 2000s in domestic. However, the sheet-membrane composite waterproofing method also acts as an abutment vulnerability that was a problem in a single method, and had the problem of damage to the formation of leakage paths. The existing non-overlap method, through vigorous research abutting sheet shall or could be developed to improve the seal performance of this method with the I-type joint coating material. Nevertheless, it has an integral top coat paint membrane and a sheet abutment limitation, damage to the upper membrane is damaged junction coating membranes has been generated. In this study, a method that has a layer of insulation on the joint bond breaker concept development, and to determine the physical properties with insulated joints to determine the breaking off of the upper joint is damaged coating membrane and tensile performance.

• 공업화학
• /
• 제20권6호
• /
• pp.663-669
• /
• 2009

지구온난화에 가장 큰 영향을 미치는 이산화탄소를 연소 후 배가스로부터 흡착 분리하기 위한 허니컴 흡착소자의 제조 및 그 특성에 관한 것이다. 고온사용이 가능하도록 세라믹쉬트, 활성탄소 쉬트를 사용하여 허니컴을 제조하였고 그 위에 Na-X 제올라이트를 코팅하였다. 또한 Na-X 제올라이트를 포함시킨 제올라이트 쉬트를 사용하여 허니컴 흡착제를 제조하였다. 이들 세 가지 허니컴 흡착제에 대하여 이산화탄소 흡착량, 표면특성 그리고 16% 이산화탄소 혼합가스를 공급하여 파과특성을 분석하였다. 또한 가열재생에 따른 이산화탄소 농축특성과 가열시 허니컴 흡착제의 온도변화를 분석하여 열스윙 흡착 분리공정에서의 우월성을 비교 분석하였다. 이들 허니컴을 사용한 흡착파과실험 결과를 바탕으로 하여 회전식 흡착 농축공정의 적용 가능예를 보여주었다.

• 한국잠사곤충학회지
• /
• 제42권1호
• /
• pp.42-47
• /
• 2000

Structural and thermal characteristics of silk fibroin/poly(2-hydroxyethyl methacrylate)(PHEMA) blend films were investigated using FTIR, X-ray diffractometer, differential scanning calorimeter, thermogravimeter and scanning electron microscope. FTIR spectra showed that the conformation of silk fibroin prepared by dissolving in formic acid was $\beta$-sheet, which did not affected by blending with PHEMA. The X-ray diffraction patterns also showed that individual crystalline structure of silk fibroin and PHEMA was not affected for the blend films. The initial thermal decomposition temperature of silk fibroin/PHEMA blend film tends to be higher than either of silk fkbroin or PHEMA. Thermal stability of both polymers, more notably PHEMA, can be improved by blending two components. As a result of SEM observation, the phases separation for silk fibroin/PHEMA blend films occured regardless of blend ratio ; continuous and dispersed phase were silk fibroin and PHEMA component, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1798-1802
• /
• 2007

Adhesion strength of single layer ceramic capacitor sheet was measured using a peel testing system developed in this study. The peel test specimens with various dimensions were prepared from the ceramic sheet cast on the PET film. In peel test, the sheet specimen was adhered on the glass jig floating on the liquid media, which was designed to minimize the friction, and the specimen was then pulled up by micro-actuator. During the separation of the sheet from the PET film, peel force was measured. To normalize the testing condition, 3 different widths of the specimen were selected: 5, 10 and 20 mm. was used Furthermore, testing speed effect was investigated in this study. From the resullts using various testing conditions, the standard method for the peel strength testing may be suggested. Based on the testing condition, effect of peel angle on the strength was experimentally examined. It was found that the adhesive strength for the ceramic sheet is nearly identical, irrespective of the specimen width ranged from 5 to 20 mm, while the adhesive strength was increased with increasing testing speed. Furthermore, the strength was shown to be dependent on the peel angle.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표대회 논문집(III)
• /
• pp.839-844
• /
• 1998

The purpose of this study is to analyze the interface debonding failure on RC beams strengthened with carbon fiber sheet(CFS). The behavior of damaged RC beams strengthened with CFS is analytically investigated using both linear elastic fracture mechanics (LEFM) approach and the finite element method. This study includes the investigation of the separation mode by interface fracture of the strengthening materials due to the interfacial shear and normal stresses.

• 멤브레인
• /
• 제34권1호
• /
• pp.79-86
• /
• 2024

고분자 분리막의 대표적인 형태 중 하나인 평판형 분리막은 제조가 용이하여 실험실에서 분리막 소재 연구에서부터 실제 상용 분리막 생산에 이르기까지 널리 활용되는 분리막의 형태이다. 정밀여과 및 한외여과 등에 사용되는 평판형의 다공성 고분자 분리막은 주로 상분리 공정을 통해 제조할 수 있으며, 여기에는 비용매 유도 및 증기 유도 상분리 공정이 활용된다. 그러나 상분리 공정 특성상 주변 환경과 실험자에 따라 샘플 간 편차가 쉽게 발생하여 재현성의 확보가 어려운 점이 있다. 따라서 개발된 제조기술을 스케일업 및 재현성 확보를 위해 제어된 환경에서 연속식 대면적 제조가 가능한 롤투롤 제조장치가 필요하며, 본 연구에서는 실험실 스케일의 제조기술을 나이프 및 슬롯다이 롤투롤 공정으로 스케일 업 했을 때 나타나는 제조 환경 차이에 따른 분리막의 특성 변화를 비교하였다. 최종적으로 연속식 제조공정 인자에 대한 최적화를 통해 대면적 제조 시 분리막의 균일성을 확보하였다.

• 소성∙가공
• /
• 제10권3호
• /
• pp.253-260
• /
• 2001

This study was performed to investigate the optimized warm forming conditions which gave the maximum drawing depth in square cup drawing of clad sheet metals, by changing the temperatures of die and blankholder and also shapes and materials of blanks. Two kinds of clad sheet metals, STS304-A1050-STS304 and STS304-A1050-STS430 were selected for experiments. The relative drawing depth of STS304-A1050-STS304 clad sheet was increased up to 4.4 at $150^{\circ}C$ that was 29% higher than at room temperature, whereas STS304-A1050-STS430 material was improved to 3.9 at $120^{\circ}C$ which was 15% better than at room temperature. In addition, comparison of wall thickness and hardness of a warm drawn cup with those of room temperature showed more even distributions. No separation between each laminated material after drawing occurred through inspection by microscope as well as application of penetrant test and bond strength test. Therefore, warm forming technique was confirmed to give better results in deep drawing of stainless clad sheet metal.