• 한국지반공학회논문집
• /
• 제28권8호
• /
• pp.55-63
• /
• 2012

깊이에 따른 지반의 전단파 속도(또는 전단탄성계수) 분포는 일반적인 지반 해석 설계 또는 지진해석과 같은 다양한 지반공학분야에서 사용되는 중요한 물성치이다. 이러한 지반의 전단파속도 주상도는 탄성파 탐사를 통해 결정할 수 있으며, 이를 위한 다양한 탄성파 탐사 방법이 연구개발 되어 있다. 표면파 탐사법은 모든 실험이 지표면에서 이루어지는 탄성파 탐사법들 중의 하나로서 현장 실험, 파장(또는 주파수)에 따른 표면 계측파의 위상속도 곡선인 분산곡선의 결정, 역산을 통한 대상 지반의 전단파 속도 주상도의 결정으로 동일하게 구성되어 있다. 본 논문에서는 표면파 실험을 위한 자동화된 역산 방법을 개발하였으며, 제안된 방법을 가장 최근에 개발된 표면파 탐사법들 중 하나인 HWAW(Harmonic Wavelet Analysis of Waves) 방법에 적용하였다. 제안된 방법에서는 새로운 오차함수를 제안하고 이를 이용한 유전자 알고리즘을 역산에 사용하였다. 제안된 방법의 타당성을 검토하고자 수치모의 실험과 현장 실험을 수행하였으며, 이를 통해 제안된 방법의 현장 적용성 및 타당성을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.772-776
• /
• 2001

The flow structures of turbulent shear layer behind oil fences with different tip configurations were investigated experimentally using flow visualization and PIV velocity field measurement. An oil fence was installed in a circulating water channel and the flow structure around the fence tip was mainly analyzed in this experiment. The four tip configurations tested in this experiment are knife edge; semi-circle edge, circular edge and rectangular edge. The 300 instantaneous velocity fields were measured using the single-frame PIV system and they were ensemble averaged to give the mean velocity field and spatial distribution of turbulent statistics. Free stream velocity was fixed at 10ms/sec and the corresponding Reynolds number based on the fence height was Re=4000. As a result, for the oil fence with rectangular edge, the streamwise velocity component was decreased. On the other hand it was increased for the oil fence with circular edge. For all four fences tested in this study, general flow pattern of the lower shear layer is analogous but the upper layer shows difference depending on the tip configurations. The oil fence with circular edge has more diffusive upper shear layer than that of the others. The shear layer of the oil fence with rectangular edge has relatively thin thickness. The oil fence with circular edge was found to be proper shape for tandem fence.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.

• Structural Engineering and Mechanics
• /
• 제69권2호
• /
• pp.121-129
• /
• 2019

The present study investigates the propagation of shear waves in a composite structure comprised of imperfectly bonded piezoelectric layer with a micropolar half space. Piezoelectric layer is considered to be initially stressed. Micropolar theory of elasticity has been employed which is most suitable to explain the size effects on small length scale. The general dispersion equations for the existence of waves in the coupled structure are obtained analytically in the closed form. Some particular cases have been discussed and in one particular case the dispersion relation is in well agreement to the classical-Love wave equation. The effects of various parameters viz. initial stress, interfacial imperfection and micropolarity on the phase velocity are obtained for electrically open and mechanically free system. Numerical computations are carried out and results are depicted graphically to illustrate the utility of the problem. The phase velocity of the shear waves is found to be influenced by initial stress, interface imperfection and the presence of micropolarity in the elastic half space. The theoretical results obtained are useful for the design of high performance surface acoustic devices.

• 한국지반공학회논문집
• /
• 제22권11호
• /
• pp.47-54
• /
• 2006

비고결화된 흙의 전단파 속도는 모세관 현상을 무시할 수 있는 경우 유효응력의 함수로 표현할 수 있다. 그러나 지반에서의 응력상태는 등방성인 경우보다는 이방성인 경우가 대부분이므로 이러한 유효응력은 파가 전파되는 방향과 입자가 움직이는 방향의 두 가지로 나눠진다. 또한, 전단파 속도는 입자 특성에 따라 실험적으로 결정되는 ${\alpha}$계수와 ${\beta}$지수에 영향을 받는데 ${\beta}$지수의 경우 입상 매질(particulate material)의 접촉 특성(입자크기, 입자모양, 입자들의 구조)에 따라 결정되며, ${\alpha}$계수는 패킹(packing)의 형태(즉, 간극률과 coordination number), 입자를 만드는 재료의 특성, 입자간의 접촉 거동, 구조의 변화에 따라서 변화한다. 본 연구에서는 입자구조의 특성이 다른 점토, 모래, mica등의 재료로 압밀시험을 실시하고 벤더 엘리먼트를 통하여 유효응력 방향과 입자 이방성에 따른 전단파 속도를 측정하였다. 연구 결과, 둥근 입자로써 입자자체가 등방성인 경우에는 응력이방성에 의하여 전단파 속도의 크기가 달라지는 것으로 나타났다. 또한 전단파 속도는 동일한 응력 하에서 입자 배열에 의존하는 것으로 나타났다. 이번 연구는 지반구조물의 설계와 시공 시 전단파 속도와 전단탄성계수는 매우 신중하게 계산되고 사용되어져야 함을 제시하고 있다.

• 소성∙가공
• /
• 제10권4호
• /
• pp.302-310
• /
• 2001

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted inclined die surface connecting the die enterance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the twisting of die surface and the shear work is calculated by the consumption of shear energy. The increase rate of angular velocity is determined by the minimization of plastic work. The angular velocity of die exit can be controlled by the land length and the length of inclined die. The alular velocity assums to be increased linearly by the axial distance from the die enterance to the die exit. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction constant.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.88-96
• /
• 1987

본 논문에서는 Maubach의 방법에 내재된 불합리한점을 보완하고자 Fig.1(b)와 같이 .iota.=0인 곳에서 속도구배를 ㄹ변환하여 마찰계수와 조도함수를 계산하였다. 이 방법에 의해 얻어진 속도분포에서는 .iota.=0인 곳에서 속도구배에 불연적성이 일어나지 않는다.

• 대한기계학회논문집
• /
• 제17권12호
• /
• pp.2982-2994
• /
• 1993

Low-velocity impact responses of composite laminates are investigated using the finite element method based on various theories. In two-dimensional nonlinear analysis, a displacement field considering higher order shear deformation and large deflection of the laminate is assumed and a finite element formulation is developed using a C$^{o}$-continuous 9-node plate element. Also, three-dimensional linear analysis based on the infinitesimal strain-displacement assumptions is performed using 8-node brick elements with incompatible modes. A modified Hertzian contact law is incorporated into the finite element program to evaluate the impact force. In the time integration, the Newmark constant acceleration algorithm is used in conjuction with successive iterations within each time step. Numerical results from static analysis as well as the impact response analysis are presented including impact force histories, deflections, strains in the laminate. Impact responses according to two typical low-velocity impact conditions are compared each other.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.846-857
• /
• 1995

An experimental study is made of turbulent shear flows in a nearly two-dimensional 90.deg. curved duct by using the hot-wire anemometer. The Reynolds normal and shear stresses, triple velocity products, integral length scales, Taylor micro length scales and dissipation length scales are measured and analyzed. For a positive shear at the inlet, the afore-mentioned turbulence quantities are all suppressed. However, when the inlet shear flow is negative, they are augmented, i.e., the convex curvature suppresses the turbulence whereas the concave curvature augments it. It is found that the curvature effects are rather sensitive to the triple velocity products than the Reynolds stresses. The evolution of turbulence under the curvature with the different shear conditions is well described by the modified curvature parameter S' and the non-dimensional development time ${\tau}$.'

• 지구물리와물리탐사
• /
• 제9권4호
• /
• pp.255-260
• /
• 2006

인접한(대략 1.5 m) 두 개의 시추공에서 확인한 화강암 전단대는 그 폭과 물성(투수율)에서 상당한 차이가 있다. 시추공 간 전단대의 투수율의 분포 특성을 규명하고자 고주파수(>10 kHz) 신호에 의한 시추공 탄성파 토모그래피 탐사를 실시하였다. 시추공에서 획득한 투수율과 탄성파 속도 토모그램에 표출된 속도 패턴을 대비한 결과는 고해상 공대공 속도 토모그램이 전단대의 특성, 즉 균열빈도, 폭, 연장 등에 대한 유용한 정보를 제공할 수 있다는 사실을 제시하였다.