• 소성∙가공
• /
• 제8권2호
• /
• pp.152-159
• /
• 1999

This study is to investigate the effects of warm deep drawing with aluminum sheets of A1050-H16 and A5020-H32 for improving deep drawability. Experiments for producing circular cups and square cups were carried out for various working conditions, such as forming temperature and blank shapes. The limit drawing ratio(LDR) of 2.63 in warm deep drawing of circular cups in case of A5020-H32 sheet, whereas LDR of 2.25 in case of A1050-H16, could be obtained and the former was 1.4 times higher than the value at room temperature. The maximum relative drawing depth for square cups of A5020-H32 material was also about 1.92 times deeper than the depth drawn at room temperature. The effects of blank shape and forming temperature on drawability as well as thickness distribution of drawn cups were examined and discussed.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제43권2호
• /
• pp.139-149
• /
• 2004

This study was initiated by the idea to help students to be more ideally educated following the 7th curriculum that seeks the proactive students along with creativity for the 21st century. Mind-map was the main tool throughout the study and this was performed to find answers for the following questions : 1) to examine how students' drawing a mind-map affects their mathematical tendency or emotional aspects (motivation for study, interest, etc); 2) to investigate the types and characteristics of mind-maps that students draw; 3) to analyze advantages and obstacles that they experience during the process of drawing a mind-map and provide some suggestions for overcoming them. The research shows that students were highly motivated by the drawing a mind-map. There are types of mind-maps: tree shape and radial shape, and each shape has its own advantages. But the more important factor for being a good mind-map is where and how each concept is located and connected. Although it is true that drawing a mind-map helped students to see the bigger structure of what they learned, but there are several hardships taken care of. The study suggests to extend the experiment to various levels of students and diverse contents.

• 복식문화연구
• /
• 제5권4호
• /
• pp.130-158
• /
• 1997

This study outputs calculation of regression of each items for production of torso basic pattern according to 6 body types as the result of another study and intends to present drawing method of torso model by short measure method modified and supplied and supplied by experiments of wearing clothing. SAS(Statistical Analysis System) is used for figures management and methods for analysis used are Frequency Analysis, Means Analysis, Regression Analysis, Correlation Analysis, etc. Results are as follows. 1. Correlation analysis is used to output the size necessary for torso prototype drawing by sort measure method and waist front length, back length, crotch length, shoulder point-cerricale-shoulder point, bust circumference, waist circumference, weight, etc, are set up as representative items calculation of regression of each type is suggested. 2. In the result of experiment of the first wearing clothing intended for 5 in each type and the whole 30, to develop torso prototype drawing method by short measure method, as we find some problems of the shape and propriety of neck root circumference line, the position of shoulder point, pulling or hold armpit parts, waist circumference line, the degree of dissatisfaction is high, so the second experiment of wearing clothing is propriety of each part is improved, all items except the length and quantity of shoulder dart, waist in back bodice, clearance quantity of hip circumference, and the place of shoulder line in side bodice. So, it was modifed and supplied and then the third torso prototyped drawing method by shout measure method was suggested. The third prototype drawing method was suggested, by modifying and supplying.

• 소성∙가공
• /
• 제10권6호
• /
• pp.456-464
• /
• 2001

Deep drawing and ironing are tile major process today in manufacturing of aluminum alloy battery case used in cellular phone. Most of these process require multi-stage ironing following the deep drawing and redrawing processes. The practical aspects of this technology are well known and gained through extensive experiment and production know-how. However, the fundamental aspects of these processes are relatively less known. Thus, it is expected that process analysis using FEM techniques would provide additional detailed information that could be utilized to improve the process condition. This paper illustrates the application of process modeling to deep drawing and redrawing operations. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product. A commercially available finite element code LS-DYNA3D was used to simulate deep drawing and redrawing operations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.235-238
• /
• 2001

Milli-structure components are classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.471-476
• /
• 2001

Milli-structure components ate classified as a component group whose size is between macro and micro scales, that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In this study, milli-structure rectangular cup drawing is analyzed and measured using the finite element method and experiment. Generally, milli-structure containers or cases like cellular phone vibrator consist of rectangular-shaped drawing to save installation space. A systematic approach is established for the design and the experiment of the forming processes for rectangular milli-structure cases. To verify the simulation results, the experimental investigations were also carried out on a real industrial product. The numerical analysis by FEM shows good agreement with the experimental results in view of the deformation shape of the product.

• 한국멀티미디어학회논문지
• /
• 제14권5호
• /
• pp.691-702
• /
• 2011

최근 컴퓨터 그래픽스와 사용자의 인지를 결합한 다양한 연구들이 진행되고 있다. Cole 등은 미술가들의 라인 드로잉 데이터를 수집하여 기존의 CG(Computer-Generated) 라인 드로잉 알고리즘들이 미술가들의 드로잉 특성을 반영하고 있는지 비교하고, 사용자들이 어떤 라인 드로잉 알고리즘의 결과에서 형태를 효과적으로 인지하는지 평가하는 실험을 수행하였다. 그러나 라인 드로잉 알고리즘의 결과보다 BRDF 쉐이딩 모델이 적용된 결과에서 형태를 더욱 효과적으로 인지한다는 결과를 보였는데, 이는 음영이 형태 정보를 전단하기에 더욱 효과적인 요소임을 반증한다. 따라서 본 논문에서는 물체에서 인지한 음영과 미술가들의 음영 표현, 그리고 CG 쉐이딩 알고리즘 간의 상관관계에 대해서 연구한다. 특히, 미술가들의 음영 표현 특성과 CG 쉐이딩 알고리즘에서 나타나는 특성에 초점을 맞추고 이를 정량적으로 분석한다. 본 논문에서 수집한 실험 데이터 및 분석 결과는 효과적인 형태 전달을 목적으로 하는 새로운 CG 쉐이딩 알고리즘을 설계하는데 활용한 것으로 기대된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권4호
• /
• pp.509-516
• /
• 2009

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding force and the punch load. As a result, if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum value of process variables.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.179-186
• /
• 2002

This paper is the study on improving the coefficient of utilization of material in deep drawing process. Cylindrical cup drawing process is widely used in sheet metal forming process. The blank shape is one of the important things in sheet metal forming process. It is produced for the bridge of blank in a blanking process. The coefficient of utilization of material is much effected by this bridge of blank. This study offered a new process method to reduce the loss of material. The new blank shape offered and manufactured by new process method is investigated by a finite element method and the experiment. Then the wrinkling, the punch load, the thickness distribution is observed. This result is different from the result of circular blank process. And it is got that the Max strain, the wrinkle and the height of the wrinkle are effected by the holding farce and the punch load. As a result. if the processing optimum condition is found, the loss of material will be reduced. It is necessary to research systematically about determining the optimum vague of process variables.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.64-87
• /
• 2005

The purpose at this study is to develop the appropriate bodice model for Chinese women in order to contribute to the improvement of fitness at clothing products that are exported to China. The sample group was the subject of 149 persons with the standard body shape at 19-24 years old women who reside in Beijing and Shanghai, China. The data analysis is processed for statistics using SPSSWIN 10.0 PROGRAM, and the used analysis methods are technical statistics analysis, factor analysis, group analysis, and one-way ANOVA. The outcome of this study is summarized as follows. 1. Prior to develop the tight-fitting shape of bodice model, the body classification approach by the posture and type of bending and stretching is selected to use 6 index items, and the body types are classified into bent body, right body, and pull-back body. 2. The average body size of standard body shape had 3 times of wearing experiment based on the tight-fitting shape of ESMOD bodice block drawing, and the system was corrected and supplemented to present the final bodice block drawing. 3. Comparisons have been made based on the center front line, center back line and chest circumference for each of existing bodice block for Chinese women, existing bodice block for Korean women and the combination of the bodice block under this study.