• 자원환경지질
• /
• 제4권4호
• /
• pp.167-215
• /
• 1971

I. Purpose and Importance of the Study The purpose of the present study is to clarify to geological, mineralogical, and physico-chemical properties of the clay minerals deposits imbedded in the Tertiary sediments in the areas between. Pohang and Ulsan along southeastern coastal region of Korea. These clays are being mined and utilized for filter and insecticide after activation or simple pulverizing, nontheless activated clays are short coming as chemical industry in Korea has been rapidly grown in recent years. In spite of such increase in clay demand, no goological investigation on clay deposits nor physico-chemical properties of the clays have been carried out up to date. Consequently activated clays produced in Korea is not only of low grade but also of shortage in supply, so that Korea has to import activated clays of better grade. The importance of the present study lies, therefore, on that guiding principle could be laid down by knowing stratigraphical horizons, of clay deposits and fundamental data of improving grade of activated clays might be derived from the results of physico-chemical examinations. II. Contents and Scope of the study The contents of the study are pinpointed down in the following two subjects: 1) General geological investigation of Tertiary formations distributed in the areas between Pohang and UIsan, and detail geological study of the bentonitic clay deposits imbedded in them. 2) To clarifty physico-chemical characteristics of the clays by means of chemical analysis, X-ray diffraction and electron microscope. The scope of the study involves the following there points: i) Regional geological investigation-This investigation has been carried out in order to find out the distribution of Tertiary sediments and exact location of clay mineral deposits in the areas between Pohang and UIsan. ii) Detail geological investigation-This has been concentrated in and around the clay deposits which. had been found out by the regional investigation. iii) Laboratory researchs include i) age determination and correlation of Tertiary sediments by paleontological study, and ii) Chemical analysis, X-ray diffraction, and electron microscopic studies on clays, samples taken from various clay deposits. III. Research Results and Suggestions 1) The geology of the area investigated is composed mainly of Janggi and Beomgokri groups of Miocene age in ascending order rested on the upper Silla system, Balkuksa granite and volcanic rocks of upper Cretaceous age as base. 2) Janggi group is composed in ascending order of Janggi conglomerate, Nultaeri rhyolitic tuff, Keumkwangdong shale, two beds of lignite-bearing formations which consist of alternation of conglomerate, sandstone and mudstone, and andesitic, rhyolitic, and basaltic tuff beds. 3) Beomgokri group is mainly composed of andesitic to rhyolitic tuff interlayered by conglomerate and tuffaceous sandstone. In the areas around boundary between North-and South Kyeongsang-do is distributed Haseori farmation which is composed of conglomerate, sandstone, mudstone and andesitic to rhyolitic tuff, and which is correlated to Eoilri formation of Janggi group. 4) Clay deposits of the area are interbedded in Eoilri, Haseori, Nultaeri tuff, Keumkwangdong shale, upper and lower horizon of the lower lignite-bearing seam, and Keumori rhyolitic tuff formations of Janggi group; and are genetically classi.fied into four categories, that is, i) those derived from volcanic ash beds(Haseori and Daeanri deposits), ii) those of secondary residual type from rhyolitic tuff beds(Seokupri deposits), iii) Clay beds above and beneath the lignite seams, (Janggi and Keumkwangdong deposits), and iv) those derived from rhyolitic tuff beds(Sangjeong and Tonghae deposits). 5) Mineral constituents of clay deposits are, according to X-ray diffraction, montmorillonite accompanied in different degree by cristobalite, plagioclase, quartz, stilbite, and halloysite in rare occasion. The clays are grouped according to mineral composition into four types; i) those consist mostly of montmorillonite, ii) those composed of montmorillonite and cristobalite, iii) those composed of montmorillonite and plagioclase, and iv) those composed of montmorillonite, plagioclase and quartz. 6) Clays interbedded in Haseori formation and vicinity of lignite seams belong to the first type, are of good quality and derived either from volcanic ash bed, or primary clay beds near lignite seams. Clays belonged to other types are derived from weathering of rhyolitic tuff formations and their quality varies depending upon original composition and degree of weathering. Few clays in secondary residual type contain small amount of halloysite. 7) Judging from analytical data, content of silica($SiO_2$) varies proportionally with content of cristobalite, and alumina($Al_2O_3$) content does not vary with that of plagioclase, but increases in the sedimentary bedded type of deposits. 8) It is unknown whether or not these days could be upgraded by beneficiation since no grain size of these impurities nor beneficiation test had been studied. 9) Clay beds derived from valcanic ash layers or sedimentary layers at the vicinity of lignite seams are thin in thickness and of small, discontinueous lenticular shape, although they are of good quality; and those derived from rhyolitic tuff formations or residual type from tuff are irregular in both occurrence and quality. It is, therefore, not only very difficult but also meaningless to calculate its reserve, and reserve estimation, even if done, will greatly be deviated from practically minable one. Consequently, way of discovery and exploitation of clay deposits in the area under consideration is to check the geologically favorable areas whenever needed.

• 헤리티지:역사와 과학
• /
• 제53권1호
• /
• pp.52-63
• /
• 2020

이 연구는 국내 대표적인 석회 동굴인 대금굴, 온달동굴, 성류굴의 내부 온도 변동의 특성과 기온이 동굴 내부 온도에 미치는 영향을 평가하기 위하여 수행되었다. 2019년 4월 13일부터 2019년 6월 25일까지 대금굴, 온달동굴 및 성류굴의 각 세 지점에서 매시간 온도를 측정하였다. 또한, 같은 기간에 동굴 주변의 기온 자료를 기상청에서 수집하였다. 수집된 자료의 기초 통계, 시간에 따른 변동 특성, 시계열 분석을 수행하였다. 대금굴, 온달동굴 및 성류굴에서 동굴 입구, 동굴수 유입 지점, 중간 지점 순으로 온도 변화가 크게 나타났다. 연구 기간 동안에 동굴 온도는 점차 증가하는 경향을 보였다. 대금굴은 외부로부터 약 150m에 위치한 모노레일 정류장에서 온도 변화가 크게 나타났고, 중간 지점 이후부터는 거의 일정하게 유지되었다. 정류장에서는 관람객의 영향으로 인해 기온의 영향이 크게 나타나지는 않았지만, 동굴 입구에서 내부로 갈수록 기온의 영향이 점차 감소하였다. 온달동굴은 입구에서 기온의 영향으로 온도가 넓은 범위를 보였지만 내부는 거의 일정하게 유지되었다. 그러나 동굴 내 관람 구간 가장 안쪽의 동굴수가 유입되는 지점에서는 유입되는 동굴수의 수온이 동굴 온도에 영향을 주었다. 성류굴은 입구와 중간 지점에서 뚜렷한 온도 변화를 보이고 내부는 거의 일정하게 유지되었다. 입구는 기온의 영향으로 온도 변화가 나타났지만, 중간지점은 기온보다는 호수의 수온에 영향을 더 많이 받은 것으로 추정되었다. 그러나 이번 연구에서는 이를 명확하게 설명하지 못하였다. 시계열 분석 결과 모든 동굴에서 기온이 약 1시간이 지난 후에 동굴 내부 온도에 영향을 주는 것으로 평가되었다. 동굴의 규모, 내부 구조, 동굴수, 동굴 입구의 크기와 형태, 공기의 흐름, 관람객 등이 동굴의 온도에 영향을 줄 수 있으므로 동굴 온도 변동 특성을 명확하게 이해하기 위해서는 이러한 요소들도 함께 고려되어야 한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제31권10호
• /
• pp.1332-1344
• /
• 2004

최근 초고속 통신망 및 멀티미디어 관련기술의 발달로 인해 멀티미디어 데이타를 좀 더 효율적으로 전송하고 저장, 검색하는 기술이 요구되고 있다. 그 중에서 의미 기반 영상 검색은 색상, 질감, 모양 정보 등의 저 차원 특징 정보와 이미지 데이타에 의미를 부여하기 위해 주석 처리하는 것이 일반적이다. 그리고 부여된 키워드와 같은 어휘 사전을 이용하여 의미기반 정보검색을 수행하고 있지만, 기존의 키 워드기반 텍스트 정보검색의 한계를 벗어나지 못하는 문제를 야기 시킨다. 두 번째 문제점으로 내용 기반이미지 검색시스템에서 검색 성능이 떨어지며, 복잡한 배경을 가진 이미지에서 객체를 분리하기가 어렵고, 그리고 영역의 과잉 분할로 인하여 영역 추출이 어렵다. 그리고 복잡한 다중 객체를 가진 이미지에서 객체들을 분리하기 어렵다는 것이다. 이러한 문제점들을 해결하기 위해서, 본 논문에서는 총 다섯 가지 단계로 처리할 수 있는 내용 기반 검색 시스템을 구축한다. 다섯 단계 중에서 가장 중요한 부분은 RGB 이미지들 중에서 배경이 가장 큰 것과 가장 작은 것을 추출한다. 특히, 배경이 가장 큰 이미지를 이용하여 피사체와 배경을 추출하는 방법을 제안한다. 두 번째 문제점을 해결하기 위해서, RGB 채널 분할 기법을 이용하여 객체를 분리하고, Watermerge의 임계값을 이용하여 영역의 과잉분할을 최적화하며, RGB 채널 선택 기법을 이용하여 다중객체를 분리하는 방법을 제안한다. 실험을 통하여 기존에 검색하기 어려웠던 복잡한 객체들을 검색하는 방법들을 대체할 수 있도록, 제안한 기법이 기존의 방법보다 검색 성능이 우수함을 입증한다.과 황산이온의 농도에 따르는 것으로 생각된다. 이상과 같이, 에트린자이트는 콘크리트 내에서 다양한 내외부적인 화학작용 따라 특징적인 산출 양상을 보이며, 주변 환경 조건에 따라 다른 광물로 전이되는 나타내었다. 이러한 연구결과, 에트린자이트의 생성에 따른 콘크리트의 성능저하는 그 광물학적 특성과 분포양상에 관련성을 가지는 것으로 나타났다.인 상관관계를 보이지 않는 것으로 나타난다. 이에 비해서 팽윤도는 벤토나이트의 광물조성, 표면전하 특성, 입도 및 형상 등의 물리화학적 성향을 포괄하는 체표면적 수치와 대략적으로 반비례적인 관계를 보인다 따라서 벤토나이트 현탁액에서의 유변학적 특성은 몬모릴로나이트의 표면전하 특성, 형태, 입도 및 조직 등의 차이에 의해서 달라지는 점토 입자들의 응집특성 및 취합결정체의 형상에 주로 규제되고, 제올라이트와 같은 미세한 불순 광물성분들의 영향도 부수적으로 관여되는 복합적인 성향인 것으로 해석된다.18.88%이상 향상시키는 것으로 나타났다. 3. 유지방 함량 23.80%인 control 치즈의 cholesterol 함량은 81.47mg/100g이었고, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%를 첨가한 cheese에서는 cholesterol 함량이 20.15mg/100g으로 cholesterol 제거율이 75.27%로 가장 높게 나타났다. 4. Meltability는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한

• 자원환경지질
• /
• 제12권2호
• /
• pp.95-104
• /
• 1979

The position of any point on the earth's surface can be. represented in the spherical coordinates by surface spherical harmonics. Since geomagnetic field is a function of position on the earth, it can be also expressed by spherical harmonic analysis as spherical harmonics of trigonometric series of $a_m({\theta})$ cos $m{\phi}$ and $b_m({\theta})$ sin $m{\phi}$. Coefficients of surface spherical harmonics, $a_m({\theta})$ and $b_m({\theta})$, can be drawn from the components of the geomagnetic field, declination and inclination, and vice versa. In this paper, components of geomagnetic field, declination and inclination in the Korean peninsula are obtained by spherical harmonic analysis using the Gauss coefficients calculated from the world-wide magnetic charts of 1960. These components correspond to the values of normal geomagnetic field having no disturbances of subsurface mass, structure, and so on. The vertical and total components offer the zero level for the interpretation of geomagnetic data obtained by magnetic measurement in the Korean peninsula. Using this zero level, magnetic anomaly map is obtained from the data of airborne magnetic. prospecting carried out during 1958 to 1960. The conclusions of this study are as follows; (1) The intensity of horizontal component of normal geomagnetic field in Korean peninsula ranges from $2{\times}10^4$ gammas to $2.45{\times}10^4$ gammas. It decreases about 500 with the increment of $1^{\circ}$ in latitude. Along the same. latitude, it increases 250 gammas with the increment of $1^{\circ}$ in longitude. (2) Intensity of vertical component ranges from $3.85{\times}10^4$ gammas to $5.15{\times}10^4$ gammas. It increases. about 1000 gammas with the increment of $1^{\circ}$ in latitude. Along the same latitude, it decreases. 150~240 gammas with the increment of $1^{\circ}$ in longitude. Decreasing rate is considerably larger in higher latitude than in lower latitude. (3) Total intensity ranges from $4.55{\times}10^4$ gammas to $5.15{\times}10^4$ gammas. It increases 600~700 gammas with the increament of $1^{\circ}$ in latitude. Along the same latitude, it decreases 10~90 gammas. with the increment of $1^{\circ}$ in longitude. Decreasing rate is considerably larger in higher latitude as the case of vertical component. (4) The declination ranges from $-3.8^{\circ}$ to $-11.5^{\circ}$. It increases $0.6^{\circ}$ with the increment of $1^{\circ}$ in latitude. Along the same latutude, it increases $0.6^{\circ}$ with the increment of l O in longitude. Unlike the cases of vertical and total component, the rate of change is considerably larger in lower latitude than in higher latitude. (5) The inclination ranges from $57.8^{\circ}$ to $66.8^{\circ}$. It increases about $1^{\circ}$ with 'the increment of $1^{\circ}$ in latitude Along the same latitude, it dereases $0.4^{\circ}$ with the increment of $1^{\circ}$ in longitude. (6) The Boundaries of 5 anomaly zones classified on the basis of the trend and shape of anomaly curves correspond to the geologic boundaries. (7) The trend of anomaly curves in each anomaly zone is closely related to the geologic structure developed in the corresponding zone. That is, it relates to the fault in the 3rd zone, the intrusion. of granite in the 1st and 5th zones, and mountains in the 2nd and 4th zones.

• 한국지역지리학회지
• /
• 제5권2호
• /
• pp.1-14
• /
• 1999

한국의 지역사회는 근대화 및 세계화시대를 거치면서 중앙에의 종속성 심화와 세계자본에의 식민화 가능성 증대라는 위기의 상황에 봉착해 있다. 이러한 시대적 상황을 타개하기 위해서는 무엇보다도 일상생활과 생활공간에 있어서의 대응 전략이 요망되며, 그러한 전략 개발의 바탕이 되는것이 바로 지역정체성의 확립이다. 최근 지리학계에서 소지역, 즉 일상생활공간에 대한 관심이 고조되고 있는 것은 이러한 이유 때문이라고 할 수 있다. 하지만 소지역연구에 대한 이론적 논의들은 많이 있어 왔으나, 구체적인 소지역을 대상으로 한 경험적 연구는 그리 많지 않은데, 이는 연구를 위한 자료와 방법의 제한성과 관련이 있다고 판단된다. 지역신문은 대체로 행정구역상 군, 중소도시, 대도시의 구 단위의 소지역에서 발간되는 신문으로, 지역에 밀착된 작은 뉴스들이나 생활정보 등을 주요 기사로 다루고 있다. 따라서 지역신문은 지역정체성을 확인하고, 그 형성 메카니즘을 분석할 수 있는 귀중한 자료인 것이다. 지역신문에 관한 지리학적 관심은 우선 지역신문의 지리적 분포 현황과 그 시기별 변천을 추적, 정리하는 작업으로부터 구체화되어야 할 것이다. 또한 지역의 성격을 밝히기 위한 정보원으로써도 적극 활용될 수 있을 것이다. 그리고 지역신문을 통한 공동체 구성원들의 통합 과정과 이를 배경으로 한 지역의 중심성, 흑은 자생력의 확보 여부에 대해서도 연구가 이루어져야 할 것이다.

• 한국가정과교육학회지
• /
• 제31권4호
• /
• pp.149-161
• /
• 2019

현재 우리는 지금까지 아무도 예측하지 못할 정도의 인공지능의 발달과 빠른 기술혁신에 따른 4차 산업혁명시대로의 변화시점에 있다. 본 연구는 '4차 산업혁명시대로의 변화에 따라 가정과교육은 어떤 역할을 수행해야 하는가?'의 문제의식에서 출발하였으며, 구체적으로 4차 산업혁명시대의 특징과 교육의 방향에 따른 가정과교육의 역할에 초점을 맞추어 연구를 진행하였다. 4차 산업혁명의 특징은 인공지능(AI), 클라우드 컴퓨팅(Cloud Computing), 사물인터넷(IoT), 빅 데이터(Big Data), O2O(Online to Offline) 등으로, 일상생활뿐만 아니라 사회체제와 과학기술, 그리고 직업의 구조에 급격한 변화를 가져올 것이다. 그 과정에서 비인간화되어가는 현상, 로봇과 인공지능의 발전에 따른 인간의 도덕성과 윤리적인 면에 문제를 줄 수 있기 때문에, 4차 산업혁명 시대 교육의 방향은 미래 공동체를 위해 함께하는 인성과 시민의식을 갖춘 미래 인재를 양성하는 방향으로 총체적인 변화가 모색되어져야 한다. 또한 초지능, 초연결 사회로의 변화를 가져올 4차 산업혁명이 교육에 주는 시사점은 인간이 인간으로서의 가치를 스스로 내면화하도록 교육의 역할이 강조되어져야 한다는 것이다. 인성교육은 교육과정의 통합 속에서 개념이 정립되고 보편타당한 내면화된 의식으로 자리 잡아야 하며 구체적인 실천적 전략들이 마련되어져야 한다. 결론적으로 4차 산업혁명시대 가정과교육의 역할은 다음과 같다. 첫째, 4차 산업혁명시대 가정과교육은 인간의 본성인 인성교육의 중추적 역할을 담당하여야 한다. 인성교육을 주도적으로 담당해야 한다는 것이다. 또한 4차 산업혁명시대 가정과교육은 인간의 다양한 삶의 본질적인 개선에 선도적 역할을 담당하여야 한다. 4차 산업혁명은 인간의 정신적, 육체적 활동뿐만 아니라, 인간의 정체성도 바뀌어 갈 것이다. 3차 산업혁명 이후의 사회에서는 산재해 있는 지식을 얼마나 신속하고 정확하게 습득할 수 있느냐가 중요했다면 4차 산업혁명의 지능정보화사회에서는 빠른 변화 속에서 인간의 본성을 지키기 위해 지식을 어떻게 활용할 것인지를 배우는 것이 요구된다. 이렇듯 4차 산업혁명은 우리 삶을 형성하는 시스템에 영향을 끼침으로써 가족과 조직, 공동체를 긍정적으로 이끌어갈 수 있는 방향성을 모색하게 되는데 가정과교육이 이러한 역할을 선도적으로 담당해야 한다.

• 설비공학논문집
• /
• 제26권12호
• /
• pp.605-619
• /
• 2014

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

• 설비공학논문집
• /
• 제27권7호
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Journal of Preventive Medicine and Public Health
• /
• 제27권3호
• /
• pp.447-463
• /
• 1994

Despite the public health importance of injury and poisoning in terms of its high mortality and incidence, epidemiologic information to be utilized are scarce in Korea. This study was carried out in 1990 on a representative sample population (about 55,000 persons) along with the 6th National Tuberculosis Prevalence Survey in order to estimate the magnitude of injury and poisoning occurrence and to identify its epidemiologic characteristics which can be aided for establishing preventive strategy. Pre-tested and structured Questionnaire was used by trained interviewer to collect data including general information of the person, various information on the injury and poisoning during the past one year such as time and place of its occurrence, its nature and external causes, type of medical institute attended, duration of treatment and outcome of the accident occured. In analysis of the data collected incidence rates per 1000 persons by sex, age group and its nature as well as external causes, and relative frequencies were calculated. The result obtained are as followings; 1. The incidence rate per 1000 was 30 for both sexes, 39 for male and 22 for female, male being 1.8 times more frequent than female. Age adjusted incidences were not much different from the crude rates. Age group specific rate curve showed bimodal shape in both sexes, small peaks in preschool children and higher peaks in older ages. The incidence rate per 1000 people by area was highest in Jeon-bug province (57/1000) and the lowest in Daegu city(11/1000). 2. The place where the injuries occured were road in 46%, within the boundary of house in 25%, and working place in 12% The injuries and poisoning had occured more frequently during the months from March to August of the year than other months. 3. The relatively frequent injuries by its nature were contusion with intact skin surface (19%), fracture of upper limb (13%), open wound of head, neck and trunk (12%) and fracture of lower limb (11%) among males; contusion with intact skin surface (28%), sprains and strains of joints and adjacent muscle (14%), fracture of upper limb (10%) and fracture of lower limb (9%) among females. Higher incidence rate among males than females were fracture of skull (4.5 times), open wound and fractures of limbs ($2{\sim}3$ times). Age specific rate of injuries and poisoning by its nature showed increasing pattern by age in fractures of upper and lower limbs and sprains & strains of joints whereas the age group of 30's showed highest incidence in open wounds of upper limb. Fractures of radius and ulna in upper limb, fractures of tibia & fibula and ankle in lower limb were most frequent among fractures of upper and lower limbs. The frequent injuries among sprains and strains of joints and adjacent muscles were that of ankle, foot and back, and among open wound were that of head and fingers. 4. Relative frequency of injuries and poisoning by external causes showed following order : other accidents (25%), accidental falls (23%), motor vehicle accident (22%) and other road vehicle accident (14%) among males and accidental falls (37%), motor vehicle accident (24%) and other accident (18%) among females. The external causes revealing higher incidences among males than females, were other road vehicle accident (4.8 times), vehicle accident not elsewhere classifiable (4.4 times), accidental poisoning (4.4 times), accidents due to natural and environmental factors (2.8 times), and sucide & self-inflicted injuries (2.8 times). Age specific incidence by external causes for frequent injuries showed that incidence of other accident steadily increased from 10's till age 50's; motor vehicle traffic accident increased from age 20's and dropped after age 60's; on the other hand accidental fall increased strikingly by age. The most frequent external causes among motor vehicle traffic accidents was motor vehicle traffic accident involving collision with pedstrain (69%), pedal cycle accident (30%) and other road vehicle accident (71%) among other road vehicle accidents; falls on same level from slipping, tripping or standing (44%) and other falls from one level to another among accidental falls; accidents caused by machinary (32%) for male and striking against or struck accidentally by objects or person for female among other accidents. 5. Seventy nine percent of the injuries and poisonings were treated in general hospital or hospital/clinic. The duration of treatment ranged from a few days to 123 weeks; the majority(52%) took under 2 weeks, 36% for $3{\sim}8$ weeks and 4% over 21 weeks. 6. The accident resulted in full recovery of normal healthy state in 62%, residual functional defects in 21% and on process of treatment in 16%.

• 한국광물학회지
• /
• 제22권4호
• /
• pp.313-324
• /
• 2009

지표-지각환경을 구성하는 지질매체의 구조와 성질의 정량적-체계적 이해를 위한 예비연구로, 매질을 구성하는 입자의 모양, 크기, 충전 밀도가 공극 구조의 특성과 매질의 성질에 미치는 영향을 알아보기 위해 입자의 모양이 구형인 글래스 비드와 모양이 불규칙한 실리카 젤을 이용하여 입자 크기와 공극률이 서로 다른 다양한 다공성 매질을 준비하였고, 핵자기공명 현미영상을 이용하여 약 $50\;{\mu}m$의 분해능으로 삼차원 영상을 획득하였다. 분석 결과, 지름 약 0.2~1.3 mm 크기의 입자로 구성된 다공성 매질의 비표면적은 2.5부터 $9.6\;mm^2/mm^3$, 공극률은 0.21에서 0.38, 투수율은 11.6에서 892.3 D이며, 이는 일반적인 미고결 샌드가 갖는 값의 범위에 해당된다. 비표면적, 공극률, 투수율의 관계는 Kozeny 식에서 예상된 경향과 비교적 일치하였다. 상자집계 프랙탈 차원은 공극률, 비표면적과의 관련성이 높으며, 공극률이 0.29~0.38일 때 비표면적이 약 2.5부터 $6.0\;mm^2/mm^3$까지 증가할수록 프랙탈 차원이 2.6에서 3.0까지 선형으로 증가하며, 공극률이 0.21~0.28일 때 비표면적이 약 2.5부터 $9.6\;mm^2/mm^3$까지 증가할수록 프랙탈 차원이 2.5에서 3.0까지 선형으로 증가한다. 실제 다공성 사암에 포함된 유체의 삼차원 구조를 핵자기공명 현미영상으로 영상화하였고, 이에 대한 비표면적은 $0.33\;mm^2/mm^3$, 공극률은 0.017, 투수율은 30.9 mD, 상자 집계 프랙탈 차원은 1.59로 계산되었다. 본 연구에서 제시된 것과 같이 핵자기공명 현미영상은 다양한 다공성 매질의 삼차원 공극 구조를 영상화할 수 있고, 삼차원 공극 구조에 대한 상자집계 프랙탈 차원은 본 연구에서와 같이 다양한 공극 구조에 대해 분석이 가능하며, 다공성 매질의 이동 특성을 나타내는 매개 변수들과 지진파 감쇠 등에 대한 조절 인자로 사용될 수 있을 것으로 기대된다.