• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.04a
• /
• pp.196-203
• /
• 1998

Viscoelastic dampers have been successfully applied to building structures for reduction of vibration induced by wind or earthquakes. But accurate estimation of responses of building structures with viscoelastic dampers is very difficult, because the properties of viscoelastic damper is dependent on temperature and frequency of vibration. For efficient control of building vibration, required damping of viscoelastic damping device need be estimated and dynamic analysis method which can estimate the response of building structure with viscoelastic damper system is indispensable. In this paper, an efficient dynamic analysis method of a building structure with viscoelastic dampers is proposed. Efficiency and accuracy of the proposed method are verified comparing analytic results with shaking table test results using reduced building models.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.3
• /
• pp.233-239
• /
• 1999

To develop the potential use as new host strain for gene cloning the optimal conditions for transform-ation of alkali-tolerant Bacillus sp. were examined. The Bacillus sp. YA-14 was cultured to late logarith-mic growth phase at 37$^{\circ}C$ in modified SPI medium (pH8.0) containing 0.4% MgSO4 0.5mM CaCl2 1 ml of competent cell was mixed with 0.5$\mu$g of plasmid DNA and incubated with shaking at 37$^{\circ}C$ for 40min. The transformation frequency under the optimal condition was 4.53$\times$10-6 CFU/ml/g plasmid DNA. The electrophresis and stably maintained in the new host.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1998.10a
• /
• pp.3-11
• /
• 1998

Response of tall buildings to near-field ground motions with distinct low-frequency pulses can differ dramatically from, for example, the response to the 1940 El Centro ground motion. For the same peak ground acceleration (PGA) and duration of shaking, ground motions with a pulse-like characteristic can generate much higher base shear, inter-story drifts and roof displacement in a high-rise building as compared to ground motions without the characteristic pulse. Also, the ductility demand is much higher and the effectiveness of supplemental damping is lower for pulse-like ground motions. This paper presents a simple interpretation of the response characteristics for two recorded and one synthetic near-field pulse-like ground motions.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.143-149
• /
• 2003

This experiment was undertaken to investigate proper conditions for protoplast isolation and regeneration from the mycelia of Lyophyllum ulmnrium. Protoplast isolation and regeneration are influenced by a variety of factors such as enzyme, osmotic stabilizer, reaction time and age of mycelia. A combination of Novozyme 234 (10mg/ml) and cellulase Onozuka R-10 (10 mg/ml) with 0.6 M $MgSO_4$ was most effective for isolation of the protoplasts. The optimum reaction time of the mycelia with the lytic enzymes was 3.5~4 hours at $28^{\circ}C$ in shaking condition at 120 strokes per min. High yield of the protoplasts were obtained from its 4~5 days old mycelia on complete agar media. Its protoplasts were regenerated to normal hyphae. Regeneration media with 0.6 M sucrose were proper for regeneration of the protoplasts. Their regeneration frequency on complete agar media was 2.3~2.7%.

• Journal of Korean Association for Spatial Structures
• /
• v.19 no.2
• /
• pp.63-72
• /
• 2019

Wireless sensors are more favorable in measuring structural response compared to conventional sensors in terms of them being easier to use with no issues with cables and them being considerably cheaper. Previous tests have been conducted to analyze the performance of MEMS (Micro Electro Mechanical Systems) sensor in sinusoidal excitation tests. This paper analyzes the performance of in-built MEMS sensors in devices by comparing with an ICP sensor as the reference. Earthquake input amplitude excitation in shaking table tests was done. Results show that MEMS sensors are more accurate in measuring higher input amplitude measurements which range from 100gal to 250gal than at lower input amplitudes which range from 10gal to 50gal. This confirms the results obtained in previous sinusoidal tests. It was also seen that natural frequency results have lower error values which range from 0% to 3.92% in comparison to the response spectra results. This also confirms that in-built MEMS sensors in mobile devices are good at estimating natural frequency of structures. In addition, it was also seen that earthquake input amplitudes with more frequency contents (Gyeongju) had considerably higher error values than Pohang excitation tests which has less frequency contents.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.35 no.4
• /
• pp.316-320
• /
• 2015

In order to improve the transformation efficiency of zoysiagrass by increasing the frequency of callus formation from mature seeds and plant regeneration, the effect of pre-treatment with sea sand was examined. Mature zoysiagrass seeds were given 10 min of swelling time before sea sand treatment using a sea sand and seed ratio of 1 : 1 and a vortex shaking speed of 6 (1,000 rpm) for 10 min. The seeds showed increased callus formation that was more than 2 times the rate in the control. In addition, plant regeneration efficiency was also increased when embryogenic callus induced from sea sand-treated mature seeds was cultured in regeneration medium. These results will be very helpful for improving the genetic transformation frequency of zoysiagrass, a recalcitrant monocot grass.

• 한국체육학회지인문사회과학편
• /
• v.58 no.6
• /
• pp.449-459
• /
• 2019

The purpose of this study is to identify how postural mechanics affects postural control on balance and stability by using frequency analysis technique from the kinematic data acquired during the one leg standing posture. For this purpose, the experimental group consisted of two groups, the normal group (n=6) and the national Gymnastics group (n=6). Displacement data of CoP were analyzed by frequency analysis of rambling (RM) and trembling (TR) by FFT signal processing. As a results, there was a significant difference in evaluating the stabilization index between the two groups with the eyes open and closed one leg stnading (p <.05). The cause of the difference was found to be the output of the maximum amplitude of RM (f1) and TR (f2) (p <.05). In particular, in the low frequency RM of 8-9 Hz, which is a natural frequency of signal wave involved in postural feedback feedback, the main frequency appeared to be performs the exercise mechanism of stable brain posture control. And in the high frequency TM of 120-135 Hz, it is considered that the adaptation of the reflective muscle response is minimized to minimize posture shaking. In conclusion, this study provides evidence for the intrinsic main frequencies according to the postural control ability which affects the CNS in one leg standing.

• Structural Engineering and Mechanics
• /
• v.63 no.6
• /
• pp.771-777
• /
• 2017

The applications of smartphones or other portable smart devices have dramatically changed people's lifestyle. Researchers have been investigating useage of smartphones for structural health monitoring, earthquake monitoring, vibration measurement and human posture recognition. Their results indicate a great potential of smartphones for measuring pedestrian-induced loads like walking, jumping and bouncing. Smartphone can catch the device's motion trail, which provides with a new method for pedestrain load measurement. Therefore, this study carried out a series of experiments to verify the application of the smartphone for measuring human-induced load. Shaking table tests were first conducted in order to compare the smartphones' measurements with the real input signals in both time and frequency domains. It is found that selected smartphones have a satisfied accuracy when measuring harmonic signals of low frequencies. Then, motion capture technology in conjunction with force plates were adopted in the second-stage experiment. The smartphone is used to record the acceleration of center-of-mass of a person. The human-induced loads are then reconstructed by a biomechanical model. Experimental results demonstrate that the loads measured by smartphone are good for bouncing and jumping, and reasonable for walking.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.5
• /
• pp.737-752
• /
• 2018

The frequency of breast augmentation surgery continues to increase annually; however, the method of follow-up care varies from hospital to hospital. In particular, many different types of post-operative bras are available in the market. This study evaluated the wearing comfort of various commercial bras that were worn immediately after breast enlargement surgery prior to the manufacture of the bra. According to interviews of medical professionals and market research, five types of brassiere were selected and evaluated by wearing satisfaction, functional performance, and an external appearance test for 6 subjects with breast augmentation surgery. The evaluation questionnaires were based on a 5 point Likert scale with data analyzed using SPSS 20.0. The study results revealed that the bra with the highest degree of satisfaction was CNB (without bra cup) type. However, the use of CNB type showed dissatisfaction in functional evaluation questions regarding breast shaking and material & tactile sensation. In the future, it is necessary to develop a new post-operative brassiere based on a CNB type bra that showed the best evaluation. However, it is also necessary to identify the merits of the other four experimental bras and reflect these advantages.

• Journal of electromagnetic engineering and science
• /
• v.9 no.3
• /
• pp.118-123
• /
• 2009

This paper discusses the design and fabrication of a reference signal generator for a naval radar system, including the vibration environment test. The transmit signals of the S-band radar system are synthesized by the reference signal and the phase noise must lower than - 130 dBc/Hz at a 10 kHz offset frequency. To achieve this specification, the phase noise of the reference signal needs to be less than -165 dBc/Hz at a 10 kHz offset. For achieving very low phase noise performance by the reference signal generator, the phase locked loop technique is applied with a 10 Hz loop bandwidth. Also, this reference signal generator has ${\pm}0.35\;ppb$ short-term stability to minimize instant phase errors and high vibration sensitivity against a ship's shaking, unbalanced rotating of antennas and so on.