• 한국환경보건학회지
• /
• 제33권1호
• /
• pp.75-81
• /
• 2007

This research was conducted to estimate the effect of sonication and reducing agent addition on soil washing of heavy metals-contaminated soil. Sonication trained in soil washing did not significantly increased extraction efficiency of heavy metal compared to soil washing only. The extraction efficiency of sonication trained in soil washing was 12% increased for Pb in 0.01M EDTA leaching solution. Pb and Cd showed higher extraction efficiency in case of reducing agent treatment with mechanical shaking than that with sonication. However, the extraction efficiency of Cu and Zn in case of reducing agent treatment with sonication was over 2 times higher than that in with soil washing. Therefore, application of reducing agent addition with sonication or mechanical shaking should be decided differently for pretreatment of soil washing, according to the kind of heavy metal. It was estimated that sonication after adding reducing agent could increase removal efficiency of Zn or Cu-contaminated soil and shorten the treatment time.

• Journal of Ginseng Research
• /
• 제13권2호
• /
• pp.198-201
• /
• 1989

백삼의 주요 polyacetylene 성분인 panaxynol과 panaxydol을 capillary-GC(FID)로 정량하고 몇 가지 추출용매(석유 ether, dichloromethane, ether, ethyl acetate, acetone, acetonitrile and methanol) 및 추출방법(진탕추출, Soxhlet 추출 또는 환류추출)에 따른 이들 성분의 추출율을 비교하였다. 이 때, GC column은 SPB-1 fused silica capillary (0.25 mm id $\times$30 m, Supelco)를 사용하였고, column oven 의 온도는 $200^{\circ}C$에서 $300^{\circ}C$까지 분단 $4^{\circ}C$씩 승온하였다. 추출용매에 따른 panaxynol과 panaxydol의 추출율은 methanol 에 의하여 환류추출하는 방법이 백삼 중 polyacetylene 성분을 최대로 추출하는 조건인 것으로 사료되었는데, 이 추출방법에 의하여 얻어진 4년근 백삼시료의 panaxynol과 panaxydol의 함량분석값은 각각 4.2mg/g과 6.4mg/g이었다.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.89-94
• /
• 2006

Traditionally fatty acid composition used to be analysed by a GC and the sample preparation process includes lipid extraction from sample and subsequent methyl esters preparation, which are time-consuming and cumbersome. As an alternative, simultaneous extraction/methylation methods are being developed for rapid and simplified sample preparation. To optimize one-step extraction/methylation method for analysis of fatty acid composition in brown rice, various reaction factors such as sample to reaction solution ratio, reaction time and temperature, shaking intensity were changed and resultant fatty acid composition data were evaluated in comparison with previous reports. The ratio of sample weight to reaction solution volume was the most critical factor in that higher sample to reaction solution ratio caused overestimation of palmitic acid and linoleic acid composition, resulting in underestimation of oleic acid. Lower reaction temperature also induced overestimation of linoleic acid and underestimation of oleic acid. Reaction duration and the intensity of shaking prior to and during the reaction, however, caused no significant changes in analysis results. In conclusion, the optimum condition was mixing 5 grains (about 0.2 g) of brown rice with $680{\mu}L$ of extraction/methylation mixture and $400{\mu}L$ of heptane, followed by reaction at $80^{\circ}C$ for 2 hours.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.61-68
• /
• 2008

A set of modal parameters of a stay-cable have been extracted from a moving picture captured by a digital camera supported by shaking hands. It is hard to identify the center of targets attached on the cable surface from the blurred cable motion image, because of the high speed motion of cable, low sampling frequency of camera, and the shaking effect of camera. This study proposes a multi-template matching algorithm to resolve such difficulties. In addition, a sensitivity-based system identification algorithm is introduced to extract the natural frequencies and damping ratios from the ambient cable vibration data. Three sets of vibration tests are conducted to examine the validity of the proposed algorithms. The results show that the proposed technique is pretty feasible for extracting modal parameters from the severely shaking motion pictures.

• 한국소음진동공학회논문집
• /
• 제18권12호
• /
• pp.1229-1236
• /
• 2008

A set of modal parameters of a stay-cable have been extracted fi:on a moving picture captured by a digital camera supported by shaking hands. It is hard to identify the center of targets attached on the cable surface from the blurred cable motion image, because of the high speed motion of cable, low sampling frequency of camera, and the shaking effect of camera. This study proposes a multi-template matching algorithm to resolve such difficulties. In addition, a sensitivity-based system identification algorithm is introduced to extract the natural frequencies and damping ratios from the ambient cable vibration data. Three sets of vibration tests are conducted to examine the validity of the proposed algorithms. The results show that the proposed technique is pretty feasible for extracting modal parameters from the severely shaking motion pictures.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2003년도 International Symposium on Clean Environment
• /
• pp.119-122
• /
• 2003

Quantitation methods of total petroleum hydrocarbons to determinate oil contaminated level in soil were discussed. Extraction characteristics of several pretreatment methods and practical detection limit and reappearances in gas chromatography/mass spectrometry. with each pretreatment method were investigated. The obtained results showed that the newly adopted quantitation method and mechanical shaking extraction method using methanol with extraction solvent are more practical and applicable to real sample than the conventional methods. In applying these methods to gasoline, kerosene, fuel oil which are major source of soil contamination, the practical quantitation limit and % relative standard deviation was able to determine with range of 2.5 - 10 ppm, 5 - 7 ％.

• Bulletin of the Korean Chemical Society
• /
• 제21권11호
• /
• pp.1101-1105
• /
• 2000

A simultaneous determination method of BTEX (benzene, toluene, ethylbenzene, o,m.p-xylene) and TPH (kerosene, diesel, jet fuel and bunker C) in soil with gas chromatography/flame ionization detection (GC-FID) was described. The effects of extracti on method, extraction solvent, solvent volume and extraction time on the extraction performance were studied. A sonication method was simpler and more efficient than Soxhlet or shaking methods. Sonication with 10 mL of acetone/methylene chloride (1 : 1, v/v) for 10 min was found to be optimal extraction conditions for 20 g of soil. Peak shapes and quantification of BTEX and TPH were excellent, with linear calibration curves over a wide range of 1-500 mg/L for BTEX and 10-5000 mg/L for TPH. Good reproducibilities by sonication were obtained, with the RSD values below 10%. By using about 20 g of soil, detection limits were 0.8 mg/L for BTEX and 10 mg/L for TPH. The advantages of this procedure are the use of simple and common equipment, reduced volumes of organic solvents, rapid extraction periods of less than 20 min, and simultaneous analysis of volatile and semivolatile compounds.

• 펄프종이기술
• /
• 제44권6호
• /
• pp.50-57
• /
• 2012

In this study, the beeswax extraction methods using organic solvents were examined to develop a optimal dewaxing technology for beeswax-treated Hanji. Thermally-aged beeswax-treated Hanji was dewaxed using four types of extraction methods including dipping, Soxhlet extraction, ultrasonic washing and shaking methods. Then, the aging stability of the dewaxed Hanji was evaluated in terms of variations in paper strength and in the color of the printed area with muk. The experimental results suggested that the dewaxing methods allowing solvent to flow during extraction showed superior extraction efficiency. The dipping method in which the organic solvent does not flow showed the slowest extraction rate of beeswax compared to three other methods. In terms of variations in tensile strength and folding endurance, however, no obvious differences in the aging stability were observed amongst these four extraction methods. Regarding the aging stability in terms of the color of the printed area with muk, Soxhlet extraction method showed the best performance of dewaxing.

• 한국환경농학회지
• /
• 제16권3호
• /
• pp.239-244
• /
• 1997

토양중 tightly bound paraquat의 효과적인 추출방법을 모색코자 HCl 및 $H_2O_2$첨가 그리고, keldahl 분해장치를 이용하여 회수율 및 여과시간의 단축을 조사하였으며, ammonium chloride와 calcium chloride의 농도와 진탕 시간을 달리하여 loosely bound paraquat의 유출정도를 조사한 결과는 다음과 같다. 1. 토양 50g에 70ml의 conc. HCl을 첨가하여 시간별로 진탕하고 여기에 진한 황산을 가하여 1시간동안 환류 추출한 결과, 60분간 진탕할때 기존의 추출방법에 비해 A토양은 1.15배 높은 96.7%의 회수율과 4.64배 단축된 14분의 여과 시간을, B토양은 1.09배 높은 84.0%의 회수율과 4.91배 단축된 11분의 여과시간을 나타냈다. 아울러, 이러한 결과는 회수율의 증가는 물론 여과시간의 단축, pH조정과정에서 과다한 NaOH사용을 통한 총용량의 증가 방지, 그리고 전체적인 실험시간의 단축을 꾀할 수 있었다. 2. HCl의 첨가에 의한 진탕과정 없이 $H_2O_2$만을 첨가하는 경우, $H_2O_2$ 30ml첨가하여 30분간의 환류 재추출하는 것이 적정 수준이었는데, 회수율은 증대하였으나 여과시간의 단축은 거의 없었다. 반면, 50ml의 $H_2O_2$ 첨가만으로도 회수율의 증대는 있었으나 실험의 위험성을 고려시 적절하지 못하다고 생각된다. 3. Kjeldahl 분해장치를 이용한 방법으로 회수율의 증대를 나타내는 경향은 있었으나, 반복간의 큰 오차를 나타내었으므로 추출방법으로 적합하지 못하다고 생각된다. 4. Loosely bound paraquat의 추출을 위해 0.01, 0.1, 1, 10M ammonium chloride와 calcium chloride를 이용하여 1.5, 3, 6, 12, 24시간으로 진탕시간을 달리하여 분석한 결과, 시간, 농도, 추출액의 변화에도 불구하고 모든 처리구에서 paraquat은 검출한계 미만의 수준이었다.

• 대한화학회지
• /
• 제40권7호
• /
• pp.492-500
• /
• 1996

Ammonium pyrrolidine dithiocarbamate(APDC)를 착화제로 사용하여 해수중 흔적량 비스무트, 카드뮴, 인듐을 동시에 용매추출하여 정량하는 방법을 연구하였다. 최적조건을 찾기위하여, 시료용액의 pH, 착화제의 양, 흔들어주는 시간, 유기용매의 종류 등에 대하여 조사하였고 역추출효율도 검토하였다. 해수시료 200mL를 취하여, pH를 4.0으로 조정하고 1% APDC 5.0mL를 첨가하고, MIBK 10.0mL로 35분 동안 흔들어 추출한다. 그리고 0.05M 수산화나트륨용액 10mL로 유기층의 HPDC를 세척한다. 유기층을 150.mu.g/mL Pd(II)를 포함하는 4M 질산으로 5분동안 흔들어 분석원소를 역추출한다. 팔라윰이 포함된 4M질산은 역추출효율을 증가시키고 흡광도 측정에서 매트릭스를 개선하여 감도를 증가시켰다. 바탕 흡광도에 대한 표준편차의 3배에 해당하는 농도로서의 검출한계는 Bi(III) :0.038, Cd(II) : 0.0057, In(III) : 0.023 ng/mL이었다. 동해 시료2 가지를 취하여 본방법으로 정량한 결과 Bi(III), In(III)은 검출한계 이하였고, Cd(II)는 0.018과 0.016 ng/mL이었다. 해수시료에 일정량 원소를 가해서 구한 회수율은 모두 90% 이상으로 아칼리금속 매트릭스에서 흔적량 원소의 동시분석에 이 방법이 응용될수 있음을 알 수 있었다.