• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.442-447
• /
• 2007

A very abnormal vibration was occurred at the LP(low pressure) turbine continuously during the pre-operation for a 550MW class USC(ultra super critical) steam turbine. This vibration was initiated at the rotating speed of about 3,450rpm and then the vibration amplitude was highly increased the number by $2{\sim}3$ times with the increase of the rotating speed to the rated speed(3,600rpm). In this paper, this abnormal vibration named spike vibration. This spike vibration was caused by the rubbing between the rotating bucket tip seal and the Lower Half of spill strip. Also, this paper presents the mechanism of the spike vibration and the proper method to eliminate this abnormal vibration problem. This result would be good practice to find the solution of similar high vibration in the USC steam turbines for power plant as well as industrial rotating machineries.

• 한국소음진동공학회논문집
• /
• 제17권12호
• /
• pp.1238-1245
• /
• 2007

A very abnormal vibration was occurred at the LP(low pressure) turbine continuously during the pre-operation for a 550MW class USC(ultra super critical) steam turbine. This vibration was initiated at the rotating speed of about 3,450 rpm and then the vibration amplitude was highly increased the number by $2{\sim}3$ times with the increase of the rotating speed to the rated speed (3,600 rpm). In this paper, this abnormal vibration named spike vibration. This spike vibration was caused by the rubbing between the rotating bucket tip seal and the lower half of spill strip. Also, this paper presents the mechanism of the spike vibration and the proper method to eliminate this abnormal vibration problem. This result would be good practice to find the solution of similar high vibration in the USC steam turbines for power plant as well as industrial rotating machineries.

• 한국산학기술학회논문지
• /
• 제7권6호
• /
• pp.1021-1027
• /
• 2006

엔진의 토크 변동과 추진축의 각속도 변화는 차량 동력 전달계의 주요 가진원이다. 본 논문에는 이들 가진원의 발생 기구에 대하여 논하였다. 이 시스템의 등가모델은 가진원과 유사하게 구성되었고, ARLA Simul v 6.7과 ARLA-Simstat v 2.3을 이용하여 컴퓨터 시뮬레이션을 수행하였다. 컴퓨터 시뮬레이션의 결과는 동력 전달계의 비틀림 가진원의 특성을 보였다. 엔진과 추진축 시스템에 대한 실험 장치는 차량의 부품으로 구성되었다. 플라이휠의 토크 변동과 추진축의 각속도는 실험 장치로 부터 측정하였다. 실험결과는 시뮬레이션 결과와 비교하였고, 이론적 결과와 일치하였다.

• Steel and Composite Structures
• /
• 제51권4호
• /
• pp.457-471
• /
• 2024

In this research, for the first time the instability boundaries for a spinning shaft reinforced with graphene nanoplatelets undergone the principle parametric resonance are determined and examined taking into account the gyroscopic effect. In this respect, the extracted equations of motion in our previous research (Ref. Asadi et al. (2023)) are implemented and efficiently upgraded. In the upgraded discretized equations the effect of the Rayleigh's damping and the varying spinning speed is included that leads to a different dynamical discretized governing equations. The previous research was about the free vibration analysis of spinning graphene-based shafts examined by an eigen-value problem analysis; while, in the current research an advanced mechanical analysis is addressed in details for the first time that is the dynamics instability of the aforementioned shaft subjected to the principal parametric resonance. The spinning speed of the shaft is considered to be varied harmonically as a function of time. Rayleigh's damping effect is applied to the governing equations in order to regard the energy loss of the system. Resorting to Bolotin's route, Floquet theory and β-Newmark method, the instability region and its accompanied boundaries are defined. Accordingly, the effects of the graphene nanoplatelet on the instability region are elucidated.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.332-335
• /
• 1997

In the industrial motor drive system, a shift torsional vibration si often generated when a motor and a load are connected with a flexible shaft. This paper treats the vibration suppression control of such a system. In this paper, the state feedback controller of the two-mass resonant system using the H$\infty$ filter is proposed. The H$\infty$ filter is robust in noise and disturbance. Simulation results show the validity proposed controller.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.114-119
• /
• 1997

Natural vibration of the rotor system having multi-step cross-sections is analyzed. The rotary inertia and the shear deformation are considered. Torque is also included in order to simulate the power transmission system. The complex displacement and the variable separation are introduced. The exact solutions in uniform cross-section segment and the boundary conditions are used. Natural frequencies and mode shapes are obtained, especially the mode shapes are countinuous.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1991년도 춘계학술대회논문집; 한국해사기술연구소, 대전; 1 Jun. 1991
• /
• pp.139-144
• /
• 1991

4WD자동차의 엔진마운트 설계기법의 정리 및 실제차량의 실험적 mode 해 석을 통해 다음과 같은 결론을 얻었다. 1. 4WD자동차의 엔진마운트 설계 개념을 체계화시키고, 이를 실제차량에 대 해서 실험적 mode해석을 해본 결과 잘 일치함을 확인하였다. 2. power transmission system에 부가되는 장치(front propeller shaft)의 영 향을 검토한바, frequency shift현상이 발생함을 확인하였다. 이러한 영향은 이들 부가장치들의 질량증가 및 관성모멘트의 변화로 기인되며, 질량의 증가 보다는 관성모멘트의 영향이 상대적으로 크리라 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• 제15권4E호
• /
• pp.37-44
• /
• 1996

To get accurate vibration analysis of rotor-bearing systems, finite element models of high speed rotating shaft, unbalance disk, and fluid film journal bearing are developed. The study includes the effects of rotary inertia, gyroscopic moment, damping, shear deformation, and axial torque in the same model. It does not include the axial force effect, but the extension is straighforward. The finite elements developed can be used in the analysis design of any type of multiple rotor bearing system. To show the accuracy of the models, numerical examples are demonstrated.

• Journal of Advanced Marine Engineering and Technology
• /
• 제14권4호
• /
• pp.67-71
• /
• 1990

The traditional finite element method applied to dynamic problems employs shape functions which are based on a static displacement assumption. The more exact approach uses frequency-dependent shape functions and frequency-dependent mass and stiffness matrices. Such matrices are developed for a torsional vibration of shaft element. Numerical examples are presented for a cantilever beam.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.301-307
• /
• 1995

A monitoring technique of spindle fairure should be investirated prior to researcs of fairure diagnosis. This work is about monitoring of unbalanced shaft and defected bearings. The major work is done via experiments and the vibration signal is analysed means of power spectrum technique, and root mean squqre, peak-to-peak. Relationship is quantitatively investigated between defects and these monitoring paramenters.