• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.285-292
• /
• 2000

Though there has been increasing use of large diameter drilled shaft as a foundation structure of bridges, current practice for quality control is to confirm the minimum required load carrying capacity during construction stage. For economic and appropriate design of drilled shaft, it is necessary to evaluate the load transfer mechanism by pile load tests during initial stage of construction and to use the test results as a feedback to a revision of initial design. In this paper, results of load tests peformed at several domestic sites are presented to investigate the load transfer characteristics of large diameter drilled shaft. It was found that most of the load on piles is sustained by shaft friction and that only small portion of the load reaches the bottom of the drilled shaft. Some test results of drilled shaft by Pile Driving Analyzer performed at same sites are also presented to compare the load transfer characteristics interpreted from static pile load tests.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.333-340
• /
• 2003

In Korea, drilled shaft are generally socketed into rock. Driven pile has environmental problems such as vibration and noise. Therefore, applications of the drilled shaft are increasing in Korea. In this paper, static load test data of the rock socketed drilled shaft at Gwangandaero and Suyeong 3hogyo are analyzed. The bearing capacities from field test data and theoretical formula are compared and analyzed. From this study, design approaches for drilled shafts in Korea are examined and several suggestions are proposed.

• 한국지반환경공학회 논문집
• /
• 제5권3호
• /
• pp.17-30
• /
• 2004

본 연구에서는 현장타설말뚝의 지지력에 관한 기존 및 IGM 이론의 적용성을 비교 평가하고, 변위를 고려한 지지력의 결정을 위해 IGM 상단부에서의 기준침하량 결정식을 제안하였다. 제안식은 말뚝의 두부침하량, IGM 상부 토층의 하중전이특성 및 말뚝의 탄성압축 이론에 기초하였다. 특히, 기존 및 IGM 이론의 적용성과 제안식의 적용성을 검증하기 위해 국내외 재하시험 결과를 이용한 분석이 실시되었다. 재하시험 결과를 이용하여 분석한 결과 제안식이 활용된 IGM 이론에 의해 향후 말뚝 설계시 변위를 고려한 지지력의 해석이 가능할 것으로 판단되었다. 특히, 제안식에 도입된 침하보정계수 $k_m$은 지반상태나 하중전이 특성을 반영하는 계수로서 하중 및 변형 증가에 따라 변화하는 특징을 보였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.506-513
• /
• 2006

In this study, multi-level hi-direction pile load tests for drilled shaft pile socketed into the gravel were performed. The lower and upper hi-direction load test assemblies were located on tip of pile and 15m above the tip of pile. Based on the results of pile load test, it was analyzed bearing capacity of gravel, skin firction of upper soils and skin friction of lower soils. It was confirmed that drilled shaft socketed into the gravel had enough bearing capacity.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 추계 학술발표회
• /
• pp.409-429
• /
• 2006

In designing rock-socketed drilled shaft, bearing capacity evaluation is very important because the maximum values of base and side resistance are not generally mobilized at the same value of displacement, FHWA and AASHTO code suggest different ultimate bearing capacity formular according to rock type and shaft settlement. In domestic code suggest base resistance and side resistance can be added on condition that after confirming the result of field load test with axial load transfer test. This paper shows that static load test and hi-directional load test result analysis of deep rock-socketed drilled shaft in three different sites. Load-settlement curve, t-z, and q-w curve in rock-socketed part were calculated and compared. t-z curve in weathered and soft rock showed no deflection softening behavior in pretty large strain (about 2-3% of diameter). Ultimate resistance could be the summation of side resistance and base resistance in rock-socketed drilled shaft in domestic sites.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.95-105
• /
• 2003

암반에 근입된 현장타설말뚝의 지지력 산정을 위하여 제안된 기존의 설계기준과 경험식들의 대부분은 재하시험의 결과에 일관되지 않은 파괴기준을 적용해서 얻어진 극한지지력에 근거해서 얻어졌다. 그 결과 이들산정식들은 동일한 조건에 설치된 말뚝에 대해서도 서로 다른 예측치를 제공하게 된다. 본 연구에서는 암반에 근입된 현장타설말뚝의 지지력을 합리적으로 산정할 수 있는 최적의 지지력산정식을 결정하기 위하여 기존의 지지력산정식들에 대하여 정확도를 조사하였다. 이를 위해서 11개의 재하시험 결과에 동일한 파괴기준을 적용함으로써 말뚝의 극한선단지지력과 극한주면마찰력을 결정하였으며, 이들은 기존 산정식으로부터 계산된 예측치의 정확도 조사에 이용되었다. 예측치와 측정치를 비교한 결과 Zhang과 Einstein의 제안식과 NAVFAC의 설계기준에 의해 계산된 극한선단지지력이 실측치에 가장 근접한 것으로 나타났다. 그리고 극한주면마찰력의 경우에는 Rosenberg와 Journeaux의 제안식이 만족스러운 예측치를 제공하였다.

• Geomechanics and Engineering
• /
• 제5권5호
• /
• pp.447-462
• /
• 2013

An analysis model for predicting the tip bearing capacity of drilled shafts in cohesionless soils is improved in this study. The evaluation is based on large amounts of drilled shaft load test data. Assessment on the analysis model reveals a greater variation in two coefficients, namely, the overburden bearing capacity factor ($N_q$) and the bearing capacity modifier for soil rigidity (${\zeta}_{qr}$). These factors are modified from the back analysis of drilled shaft load test results. Different effective shaft depths and interpreted capacities at various loading stages (i.e., low, middle, and high) are adopted for the back calculation. Results show that the modified bearing capacity coefficients maintain their basic relationship with soil effective friction angle ($\bar{\phi}$), in which the $N_q$ increases and ${\zeta}_{qr}$ decreases as $\bar{\phi}$ increases. The suggested effective shaft depth is limited to 15B (B = shaft diameter) for the evaluation of effective overburden pressure. Specific design recommendations for the tip bearing capacity analysis of drilled shafts in cohesionless soils are given for engineering practice.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.74-81
• /
• 2004

In this study, static end loading tests with load transfer measurement were accomplished for large diameter drilled shaft constructed in fault zone. Yield pile capacity (or ultimate pile capacity) from load-settlement curve was determined and axial load transfer behavior was measurd. The end bearing capacity was increased 2 times due to grouting the toe ground under pile base.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.397-404
• /
• 2002

The bearing capacity of open-ended piles is affected by the degree of soil plugging, which is quantified by the IFR. There is not at present a design criterion for open-ended piles that explicitly considers the effect of IFR on pile load capacity In order to investigate this effect, model pile load tests using a calibration chamber were conducted on instrumented open-ended piles. The results of these tests show that the IFR increases with increasing relative density and increasing horizontal stress of soils. The unit base and shaft resistances decrease with increasing IFR. Based on the results of the model pile tests, new empirical relations for base load capacity and shaft load capacity of open-ended piles are proposed. In order to check the accuracy of predictions made with the proposed equations, the equations were applied to the full-scale pile load test preformed in this study, Based on the comparisons with the pile load test results, the proposed equations appear to produce satisfactory predictions.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.29-40
• /
• 2004

현장타설말뚝의 지지력에 영향을 미치는 요소로는 말뚝의 길이 및 형상, 주면부 거칠기, 지반 및 말뚝의 탄성계수, 지반의 강도, 구속응력 등이 있으나 기존의 국내ㆍ외 설계기준에서는 이들을 모두 고려한 설계방법이 제시되지 않았다. 또한, 지반을 토사와 암반으로만 분류하여 중간특성을 가진 지반(IGM, Intermediate Geomaterials)에 대한 설계기준이 없어서 지지력 예측값이 다양하게 나타났다. 본 연구에서는 현장타설말뚝의 지지력에 관하여 하중전이 시험 결과를 이용해 기존 및 IGM 이론의 적용성을 비교 평가하였다. 연구 결과 기존의 주요 지지력 산정방법들은 실측치와 비교한 결과 지지력을 과소 평가하고 있었으며, IGM 이론의 경우 지지력 예측결과가 실측치와 잘 일치하고 있음을 보였다.