• 대한물리의학회지
• /
• 제11권1호
• /
• pp.93-105
• /
• 2016

PURPOSE: The purpose of this study was to determine the effect of corrective exercise on hip joint range of motion, lower limb alignment, radiographs of hip and knee joints, and quadriceps muscle activity in a patient with knee joint valgus deformity. METHODS: A single-subject A-B-A experimental design was used to determine the effects of therapeutic exercise. The single-subject was a 27-year-old male, who presented with knee joint valgus deformity. Corrective exercise program was performed for 40 min/day twice a week for 12-week. Range of motion (hip flexion, extension, abduction, adduction, internal rotation, and external rotation), lower limb alignment test (Q-angle, rear foot alignment, and leg length), standing anterior-posterior radiographs (neck shaft angle and knee joint space), and quadriceps muscle activity of both lower limbs were measured before (A 1), after 6 weeks (B 1) and after 12-weeks (B 2) of corrective exercise and after 6 weeks of exercise completion (A 2). RESULTS: Hip range of motion increased in all directions of both sides at B 2 and A 2 compared to at A 1. Q-angle of both side and leg length discrepancy decreased at B 2 and A 2 compared to at A 1. Neck shaft angle and knee joint space of both sides improve at B 2 and A 2 compared to at A 1. Quadriceps of both side muscle activities improved at B 2 and A 2 compared to at A 1. CONCLUSION: We demonstrated that corrective exercise increases range of motion, and improves lower limb alignment and muscle activity in a patient with knee joint valgus deformity.

• Clinics in Shoulder and Elbow
• /
• 제19권4호
• /
• pp.223-228
• /
• 2016

Background: The aim of study was to confirm the clinical effectiveness and results of wide and single anterior approach for fractures occurring along length of humerus. Methods: A total of 23 patients with humeral fracture were enrolled into our study who were able to participate in at least one year of follow-up. Seven patients had segmental comminuted humeral fractures and 16 patients had distal humeral fractures. We made various tractions of the muscles to expose the proximal and the middle third humerus between the biceps and brachialis and the distal humerus by partial splitting of lateral side of biceps through a single incision. Postoperatively, we measured the Mayo elbow performance index (MEPI). Results: we achieved bone union in all 23 patients. Solid union of the bone was achieved at an average 13.9 weeks. Postoperatively, two complications were observed screw loosening and nonunion. Revision surgery was performed in both patients. The patient with bone nonunion was treated using bone grafts. No postoperative infections or peripheral neuropathies were observed. At the final follow-up (average 20 months), we found that the average MEPI functional score of the patients was 91.7 points regardless of the fracture site. Conclusions: Our whole humerus with a single incision was effective for the treatment of segmental comminuted and distal fractures. we believe it is a useful alternative to preexisting methods of fracture fixation.

• Clinics in Shoulder and Elbow
• /
• 제26권4호
• /
• pp.397-405
• /
• 2023

Background: A precontoured plate rarely fits properly within the patient's clavicle and must be bent intraoperatively. This study aimed to determine whether anatomical reduction could be achieved using a plate bent before surgery. Methods: This study included 87 consecutive patients with displaced mid-shaft clavicle fractures who underwent plate fixation and were followed-up for a minimum of 1 year. After exclusions, 39 consecutive patients underwent fixation with a precontoured plate bent intraoperatively (intraoperative bending group), and 28 underwent fixation with the plate bent preoperatively (preoperative bending group). Using free software and a three-dimensional (3D) printer, ipsilateral clavicle 3D-printed models were constructed. Using plain radiographs, the distance between the edge of the lateral inferior cortex and the medial inferior cortex was measured. The angle between the line connecting the inferior cortex edge and the line passing through the flat portion of the superior cortex of the distal clavicle was measured. Results: Mean length differences between the ipsilateral and contralateral clavicle were smaller on both anteroposterior (AP; P=0.032) and axial images (P=0.029) in the preoperative bending group. The mean angular differences on both AP (P=0.045) and axial images (P=0.008) were smaller in the preoperative bending group. No significant differences were observed between the two groups in functional scores at the last follow-up. Conclusions: Smaller differences in length and angle between the ipsilateral and contralateral clavicle, indicative of reduction, were observed in the preoperative bending group. Using the precontoured technique with low expense, the operation was performed more effectively as reflected by a shorter operation time. Level of evidence: III.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.155-165
• /
• 1999

화강편마암으로 된 풍화암이 기반암인 암반에 소켓된 말뚝의 지지 거동을 알기 위하여 직경 40cm인 현장타설말뚝 8개를 시공하고 말뚝 재하 시험을 실시하였다. 지반 조사는 예비조사, 본조사, 그리고 시험후 조사 등 3차례에 걸쳐서 이루어 졌으며, 이 때 BX와 NX 보링(12개소) 조사와 탄성파 탐사 등이 시행되었다. 암반 소켓 말뚝의 지지 거동을 주면부와 선단부로 분리하여 평가하기 위하여 암반 소켓 깊이를 3m, 6m 그리고 9m등으로 다양하게 하고, 선단부 지지력의 영향을 배제하기 위하여 말뚝 선단부에 스타이로폼(styrofoam)을 매설하기도 하였다. 그리고 말뚝 깊이에 따른 하중 전이 해석을 위하여 말뚝 철근에 변형률 게이지 등을 설치하고 재하 시험을 수행하였다. 상기의 재하 시험 결과로부터 국내 화강 편마암으로 된 풍화암에 소켓된 현장타설말뚝의 허용 주면지지력과 허용 선단지지력을 각각 $8.6t/m^2 \;와 \;84t/m^2$로 제안하였으며, 일축압축강도를 이용한 풍화암의 탄성계수 산정식을 제안하였다.

• 한국자동차공학회논문집
• /
• 제13권5호
• /
• pp.127-133
• /
• 2005

Rotary swaging is one of the incremental forming process which is a chipless process using the reduction of cross-sections of bars, tubes and wires. The TDS(Tube Drive Shaft) of monobloc used in automotive has been developed by the rotary swaging process. The mechanical characteristics of swaged parts such as the hardness, thickness and roughness are also estimated to conduct experimental analyses of rotary swaging process with the materials of 34Mn5 Furthermore the change in the vibration mode of TDS due to design parameters, which are the tube length, diameter and thickness, has been investigated and analysed. The weight of the TDS product is smaller by about $12.8\%$ than that of SDS with the same performance. It could be evidently found that the TDS is designed to be much lighter than SDS (Solid Drive Shaft). This advantage might give some possibility to improve the NVH (Noise-Vibration-Harshness) characteristics. A maximum torque and a total number of torsional repetitions for the TDS is checked and measured to know the torsional intensity and fatigue strength through the static torsion test and torsional durability test, respectively. A total number of the torsional repetitions up to the fracture for the TDS is greater than 250,000 times.

• 한국자동차공학회논문집
• /
• 제6권6호
• /
• pp.185-194
• /
• 1998

In this study, the rotary bending fatigue test was carried out with two kinds of material, S43C and S50C, using in the Front engine and Front drive wheels(F.F.) of vehicle. The one part of specimens was heated by high frequency induction method(about 1mm depth and $H_RC$ 56~60) and tested environment temperature were $-30^{\circ}C$, $+25^{\circ}C$ and $+80^{\circ}C$ in order to look over the influence of the heat treatment and the temperatures. In the experimented result at $+25^{\circ}C$ and $+80^{\circ}C$, the fatigue life of non-heated specimens were decreased about 35%, but that of heated specimens were decreased about only 5% at $+80^{\circ}C$ more than at $25^{\circ}C$. And in the experiment result at $-30^{\circ}C$ and $+25^{\circ}C$, the non-heated and heated specimens were about 110%, 120% higher fatigue life at $-30^{\circ}C$ than at the $+25^{\circ}C$ each other. On the other hand, the fatigue crack propagation rate of S50C was higher than that of S43C.

• 대한기계학회논문집A
• /
• 제37권1호
• /
• pp.105-111
• /
• 2013

주축은 공작기계의 핵심요소로서 주축의 정 동적 특성은 공작물의 가공정밀도에 직접적으로 영향을 미친다. 주축의 특성은 축 크기, 베어링 간격, 내장모터의 위치 등에 의해 결정된다. 그러므로 축 크기, 베어링 간격, 모터위치의 선정은 주축 특성을 개선하는데 중요한 요소라 할 수 있다. 본 논문은 40,000rpm 고속주축의 정 동적 해석과 최적 설계에 관한 연구로, 유한요소해석과 최적화를 위한 통계분석을 하였다. 이를 위하여 반응표면법을 사용하여 목적함수와 설계변수를 최적화하였다. 최적화 대상은 주축의 고유진동수의 최대화와 변위의 최소화이다. 설계변수는 축길이, 축직경, 베어링 간격, 모터위치로 선정했다. 최적설계를 통해 도출된 설계안으로 초기모델보다 개선된 결과를 얻을 수 있었고, 본 연구의 결과를 주축 설계에 적용하면 주축의 정 동적 특성 개선에 도움이 될 것으로 기대된다.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.447-455
• /
• 2016

Precise propulsion shafting alignment of ships is very important to prevent damage of its support bearings due to excessive reaction forces caused by hull deflection, forces acted on propeller and crankshaft, and so forth. In this paper, a new iterative shafting alignment calculation procedure considering the interaction between shaft deflection and oil film pressure of Sterntube Journal Bearing (SJB) bush with single or multiple slopes is proposed. The procedure is based on a pressure analysis to evaluate distributed equivalent support stiffness of SJB by solving Reynolds equation and a deflection analysis of shafting system by a finite element method based on Timoshenko beam theory. SJB is approximated with multi-point biaxial elastic supports equally distributed to its length. Their initial stiffness values are estimated from dynamic reaction force calculated by assuming SJB as single rigid support. Then, the shaft deflection and the support stiffness of SJB are sequentially and iteratively calculated by applying a criteria on deflection variation between sequential calculation results. To demonstrate validity and applicability of the proposed procedure for optimal slope design of SJB, numerical analysis results for a shafting system are described.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.505-518
• /
• 2022

This study introduces soil resistance multipliers at locations encompassed by the zone of influence of the helix plate to consider the added lateral resistance provided to the helical pile. The zone of influence of a helix plate is a function of its diameter and serves as a boundary condition for the modified soil resistance springs. The concept is based on implementing p-multipliers as a reduction factor for piles in group action. The application of modified p-y springs in the analysis of helical piles allows for better characterization and understanding of the lateral behavior of helical piles, which will help further the development of design methods. To execute the proposed method, a finite difference program, HPCap (Helical Pile Capacity), was developed by the authors using Matlab. The program computes the deflection, shear force, bending moment, and soil resistance of the helical pile and allows the user to freely input the value of the zone of influence and Ω (a coefficient that affects the value of the p-multiplier). Results from ten full-scale lateral load tests on helical piles embedded at depths of 3.0 m with varying shaft diameters, shaft thicknesses, and helix configurations were analyzed to determine the zone of influence and the magnitude of the p-multipliers. The analysis determined that the value of the p-multipliers is influenced by the ratio between the pile embedment length and the shaft diameter (D_p), the effective helix diameter (D_h-D_p), and the zone of influence. Furthermore, the zone of influence is recommended to be 1.75 times the helix diameter (D_h). Using the numerical analysis method presented in this study, the predicted deflections of the various helical pile cases showed good agreement with the observed field test results.

• Applied Microscopy
• /
• 제44권2호
• /
• pp.47-52
• /
• 2014

Fine structural characteristics of eggs (nits) found on the scalp hairs of Korean children were observed with scanning electron microscopy. An egg is structurally composed of four parts: the cementum, nit body, operculum, and aerophyle. The total length of an egg is about 1.5 mm. The glue secreted from the female louse completely surrounds the 1 mm hair shaft and forms the cementum. The thickness of the cementum at the end of the nit body was found to be more than 5 times the thickness at the end toward the scalp. The nit body is shaped like a goblet with a very smooth surface. The operculum and aerophyles are located at the apiculus area. In the circular operculum, there are 10 aerophyles concentrated on the side of the hair shaft surface that are shaped like a dome. Three aerophyles in the center are surrounded by 7 aerophyles. Each aerophyle is dome shaped with a diameter of $65{\mu}m$ and a respiratory pathway with a $15{\sim}25{\mu}m$ opening at the center. On the cut surface where the operculum is separated as the egg hatches, long grooves about $1{\mu}m$ thick are uniformly formed transversely. These long grooves facilitate the separation of the operculum through body expansion at the time of hatching.