• 한국환경복원기술학회지
• /
• 제8권4호
• /
• pp.12-22
• /
• 2005

The purpose of this study is to select suitable planting base for the mat-type rooftop greening in order to popularize rooftop greening system easily. The experiment was conducted from 2004 June to 2005 May under several conditions; 4 soil depths under mats(2cm, 5cm, 10cm, 15cm), two soil mixtures(natural soil 80%+leaf mold 20%, artificial soil) and two light conditions(full sun place, 20% shaded place). In this experiment, 3 types of mats were used ; the herbaceous plants mat(11 plants inclusive of Lotus corniculatus L., Silene armeria L.), the lawn mat with Festica arundinacea and Sedum mat with Sedum kamtschaticum, Sedum sarmentosum, Sedum oryzifolium, Sedum middendorffianum. The result is as follows; in the mat-type rooftop greening, the herbaceous plants mat, lawn mat and sedum mat are the similar number of plant and effect of greening on soil depth 2cm, 5cm and 10cm, 15cm. So suitable soil depth of rooftop greening is 10cm for the load and economical factor. Thus the mat-type rooftop greening possible planting base depth of all 13cm as soil depth 10cm and mat depth 3cm. As soil mixtures, the number and growth of plants were better mat and 'natural soil 80% +leaf mold 20%' than mat and artificial soil. In herbaceous plants mat, Silene armeria L., Dianthus chinensis, Centaurea cyanus L., Lotus corniculatus L. are survival in full sun place and Silene armeria L., Dianthus chinensis, Centaurea cyanus L. are survival in 20% shaded place. In conclusion, selection of suitable soil mixtures and plants is possible extensive management rooftop greening with effect of continuous greening. The mat-type rooftop greening are lightweight and simple preparation without management and can popularize readily.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.221-224
• /
• 1999

A field experiment was carried out to observe the weed control effects of vetch and to evaluate vetch characteristics on clay loam soil in no-till direct-sown rice-vetch cropping systems. The effects of weed control, forage productivity, and N content of vetch plants were investigated. With the progress of plant growth, density of Chinese milk vetch (Astragalus sinicus L.) gradually decreased, but densities of foxtail and other weeds decreased steeply due to the depression by the over-shaded vetch canopy in a no-till direct-sown rice-vetch cropping paddy field. The vetch density in tillage systems was lower than in notillage cropping systems. Lower vetch density occurred with an increase in foxtail density and other weeds. Weed control effect increased by the progress of vetch growth, which indicated that the vetch canopy over-shaded the weeds. Vetch straw was degraded rapidly submergence after with water at the time of wet sowing of rice. Early harvesting of vetch seed resulted in lower seed germination. To acquire enough seedlings without re-sowing, the harvesting of seed should be delayed at least 28 days after the flowering stage in order to ensure the vetch population is sustainable in a no-till direct-sown rice-vetch cropping system. In order to improve the survival of vetch plants, vetch seeds should germinate from the heading .stage to before the full-ripening stage of rice plants. To enhance the percent of over-wintering survival, vetch seeds should germinate no later than the end of October in southern Korea. The dry weight of vetch plants increased with the progress of vetch growth until the flowering stage but N content decreased for 30 days from before the flowering stage (2.9%) until the ripening stage (1.8%). We concluded that Chinese milk vetch could have an effect on weed control before the flowering stage, sustainability without re-sowing of seed annually, and effective green manure for rice pre-crop in no-till direct-sown rice-vetch relay cropping systems.

• 한국농림기상학회지
• /
• 제18권4호
• /
• pp.233-241
• /
• 2016

기상청에서 제공하는 넓은 지역의 수평면 일조시간 정보를 복잡한 산간집수역의 지형특성을 반영한 실제 일조시간 분포도로 변환하기 위해 지형효과를 정량화하기 위한 실험을 수행하였다. 경남 하동군 악양면 단일 집수역을 대상으로 정밀 DEM을 이용하여 그림자모형화 및 공제선분석 기법을 적용하여 일중 시간대별 음영기복도 1년 자료를 제작하였다. 2015년 5월 15일부터 2016년 5월 14일까지 1년 간 지형조건이 서로 다른 3지점에서 바이메탈식 일조계로 측정한 일조시간자료에 음영기복도 상 해당 지점의 휘도값을 추출하여 회귀시킴으로써 맑은 날의 휘도-일조시간 반응곡선을 얻었다. 이 곡선식을 하늘상태(운량)에 따라 보정할 수 있는 방법을 고안함으로써 일조시간 상세화 모형을 도출하였다. 이 모형의 신뢰도를 기존 수평면 일조시간 추정기법과 비교한 결과 추정값의 편의가 크게 개선된 것은 물론, 일적산일조시간 기준 RMSE가 1.7시간으로 지형효과를 반영하기 전보다 37% 이상 개선되었다. 어떤 지역을 대상으로 일조시간을 상세화 하기 위해서는 먼저 대상 지역의 매 시간 음영기복도의 격자점 휘도를 모형에 입력시켜 해당 시간대의 청천 일조시간을 추정한다. 다음에 같은 시간대의 기상청 동네예보(하늘상태)에 의해 구름 효과를 보정한다. 이렇게 추정된 매 시간 일조시간을 하루 단위로 적산하여 그 날의 누적 일조시간을 얻는다. 이 과정을 연구대상 집수역에 적용하여 수평 해상도 3m의 정밀한 일조시간 분포도를 얻을 수 있었다.

• 환경정책연구
• /
• 제12권4호
• /
• pp.119-132
• /
• 2013

도시 내 중금속 오염지에 대한 정화방법의 하나인 식물정화재배(phytoremediation)의 효용성을 검증하기 위해 자생 지피식물인 비비추를 대상으로 실험을 수행하였다. 카드뮴(Cd), 납(Pb), 아연(Zn)의 중금속을 중심으로 각각 네가지 농도로(0, 100, 250, $500mg{\cdot}kg^{-1}$) 처리한 무배수용기에 비비추를 식재한 후 7개월간 식물과 토양 내 중금속 변화량을 살펴보았다. 비비추 지상부에서의 카드뮴(Cd)과 납(Pb)은 처리농도가 증가할수록 검출량도 증가하였으나, 아연(Zn)은 감소되었다. 지하부에서는 아연(Zn), 카드뮴(Cd), 납(Pb)처리가 고농도일수록 검출량도 높아지는 경향을 보였다. 식물체 지상부와 지하부간의 축적률인 TF(transportation factor)의 경우, 대부분 중금속 처리에서 80% 이상을 지하부에서 축적하는 것으로 나타났다. 토양 내 중금속의 제거량은 세 가지 중금속 모두 처리농도가 높을수록 비례적으로 증가하였다. 식물체와 토양 내 중금속 농도비인 BF(bioaccumulation factor)의 경우 아연(Zn)이 낮은 반면, 카드뮴(Cd), 납(Pb)의 경우 토양에서 식물체에 의한 축적률이 30% 이상인 것으로 나타났다. 이러한 반응은 오염된 토양에서 식물은 생육이 가능한 한계까지만 활성화할 수 있는 낮은 농도의 중금속을 선택적으로 축적하려는 것으로 판단되며, 지속적인 정화효과를 위해서는 생육과 축적이 가능한 저농도 중금속 오염지를 정화방법으로 적용될 수 있으리라 본다.

• The Journal of Advanced Prosthodontics
• /
• 제9권1호
• /
• pp.67-73
• /
• 2017

PURPOSE. The aims of the study were to evaluate the fracture load of zirconia core material after dipping in coloring liquid at different time intervals and to compare the color of dipped blocks with that of prefabricated shaded blocks. MATERIALS AND METHODS. 3-unit bridge frameworks were designed digitally. Sixty frameworks were fabricated using uncolored zirconia blocks by CAD/CAM and divided into 4 groups randomly (n = 15). Group 2 (G2) was subjected to coloring liquids for 2 minutes, Group 4 (G4) for 4 minutes, and Group 6 (G6) for 6 minutes. CFS group was not subjected to any coloring procedure. After coloring, color differences between the test groups and a prefabricated shaded zirconia group (CPZ, n = 15) were evaluated by using a spectrophotometer. Fracture test was conducted immediately after shade evaluation with a Testometric test device at a cross-head speed of 1 mm/sec. Statistical analysis for evaluating color and fracture load was performed by using one way ANOVA followed by Tukey HSD test ($P{\leq}.05$). Weibull analysis was conducted for distribution of fracture load. RESULTS. There was no difference in terms of fracture load and color between CFS (1176.681 N) and G2 (985.638 N) group and between CPZ (81.340) and G2 (81.140) group, respectively. Fracture load values of G4 (779.340 N) and G6 (935.491 N) groups were statistically significantly lower than that of CFS group ($P{\leq}.005$). The color values of G4 (79.340) and G6 (79.673) groups were statistically different than that of CPZ group ($P{\leq}.005$). CONCLUSION. Prolonged immersion of zirconia in coloring liquid not only negatively affected the fracture load of the zirconia being tested in the current study but also deteriorated the desired shade of the restoration.

• 새물리
• /
• 제68권11호
• /
• pp.1215-1224
• /
• 2018

Most solar photovoltaic (PV) modules frequently get shadowed, completely or partially, resulting in a reduction of PV generation. This paper presents and compares the results from simulations and experimental measurements of the power output from a single PV module under various shading conditions. The study was carried out with a 90 W PV module and a 250 W PV module. The shaded area was increased from 0 to 100% for both variable and constant irradiances to analyze the effect of fluctuations in the solar irradiance certain shading conditions. The effect of shading for irradiance levels from 100 to $900W/m^2$ was investigated. Results showed that for every $100W/m^2$ decrease in the solar irradiance level, the power output decreased by 9, 0.7 and 1.5 W at 0, 25 and 50% shading, respectively. For solar irradiance levels higher than $500W/m^2$, the temperature increased by 1.6, 2.7 and $1.1^{\circ}C$ at 0, 25 and 50% shading, respectively, for every $100W/m^2$ increase in the irradiance.

• Asian-Australasian Journal of Animal Sciences
• /
• 제23권3호
• /
• pp.355-365
• /
• 2010

The aim of this study was to investigate the effect of supplemental recombinant bovine somatotropin (rbST) and cooling with misters and fans on renal function in relation to regulation of body fluids in different stages of lactation in crossbred Holstein cattle. Ten, 87.5% crossbred Holstein cattle were divided into two groups of 5 animals each, housing in a normal shaded barn (NS) and in a shaded barn with a mister-fans cooling system (MF). The experiment in each group was divided into 3 phases, early- (Day 75 postpartum), mid- (Day 135 postpartum), and late stage of lactation (Day 195 postpartum). The pre-treatment study was conducted on the starting day of each stage of lactation and the treatment study was performed after the end of the pre-treatment, during which the animal was injected with 500 mg of rbST (POSILAC) every 14 days for three times. During the study, ambient temperature at the hottest period daily in the MF barn was significantly lower, while relative humidity was higher than that of the NS barn. The temperature humidity index (THI) in both barns ranged from 79-85 throughout the periods of study. Cows in the MF barn showed a lower rectal temperature and respiration rate as compared with cows in the NS barn. The effect of rbST administration increased both rectal temperature and respiration rates of cows housed in either the NS or MF barn. Milk yield significantly increased in cows treated with rbST in all stages of lactation. Increases in mammary blood flow, accompanied by increases of total body water (TBW), extracellular fluid (ECF), blood volume (BV) and plasma volume (PV), were observed in both groups of cows receiving rbST in all stages of lactation. No alterations of renal blood flow and glomerular filtration rate were observed in cows receiving rbST, but decreases in urinary excretion and fractional excretion of sodium, potassium and chloride ions appeared to correlate with reduction in the rate of urine flow and osmolar clearance during rbST administration. These results suggest that the effect of rbST supplementation to cows housed either in NS or MF barns on body fluid volume expansion is attributable to changes in the rate of electrolyte excretion by the kidney. The increased availability of renal tubular reabsorption of sodium, potassium and chloride ions during rbST treatment was a major factor in retaining body water through its colligative properties in exerting formation of an osmotic force mechanism.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 임시총회 및 하계학술연구발표회
• /
• pp.19-20
• /
• 2013

Thermoelectic properties of the typical thermoelectric host materials, the tellurides and selenides, are known to be noticeably changed by their volume change due to the strain [1]. In the bismuth telluride ($Bi_2Te_3$) crystal, a substitution of rare-earth element by replacing one of the Bi atoms may cause the change of the lattice parameters while remaining the rhombohedral structure of the host material. Using the first-principles approach by the precise full potential linearized augmented plane wave (FLAPW) method [2], we investigated the Ce substitution effect on the thermoelectric transport coefficients for the bismuth telluride, employing Boltzmann's equation in a constant relaxation-time approach fed with the FLAPW wave-functions within the rigid band approximation. Depending on the real process of re-arrangement of atoms in the cell to reach the equilibrium state, $CeBiTe_3$ was found to manifest a metal or a narrow bandgap semiconductor. This feature along with the strong correlation effect originated by the 4f states of Ce affect significantly on the thermoelectric properties. We showed that the position of the strongly localized f-states in energy scale (Fig. 1, f-states are shaded) was found to alter critically the transport properties in this material suggesting an opportunity to improve the thermoelectric efficiency by tuning the external strain which may changing the location of the f-sates.

• Journal of Astronomy and Space Sciences
• /
• 제35권1호
• /
• pp.47-54
• /
• 2018

Moon mineralogy mapper ($M^3$)'s work proved that the moon is not completely dry but has some hydroxyl/water. $M^{3{\prime}}s$ data confirmed that the amount of hydroxyl on the lunar surface is inversely related to the measured signal brightness, suggesting the lunar surface is sensitive to temperature by solar insolation. We tested the effect of solar insolation on the local distribution of hydroxyl by using $M^3$ data, and we found that most craters had more hydroxyl in shade areas than in sunlit areas. This means that the local distribution of hydroxyl is absolutely influenced by the amount of sunshine. We investigated the factors affecting differences in hydroxyl; we found that the higher the latitude, the larger the difference during daytime. We also measured the pyroxene content and found that pyroxene affects the amount of hydroxyl, but it does not affect the difference in hydroxyl between sunlit and shaded areas. Therefore, we confirmed that solar insolation plays a significant role in the local distribution of hydroxyl, regardless of surface composition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.222-223
• /
• 2007

Though there are many causes for the maximum output power reduction, the short-term problem is hot-spot effect by sun shading. To prevent this, normally PV maker uses bypass diode. In here, we tried to check the how bypass diodes works by varying sun shading portion on solar. In case of absence of bypass, the sun shading effect increases the series resistance and that promotes the reduction of maximum power and degradation of PV modules. Bypass diode worked normally when 60% of solar cell was shaded and the measured maximum output power was lower than that of theoretical one. The further analysis is needed.