• Title/Summary/Keyword: Series 60

Search Result 1,035, Processing Time 0.032 seconds

An Experimental Study on Workability for Practical Use of High-Performance Concrete (고성능 콘크리트의 실용화를 위한 시공특성에 관한 실험적 연구)

  • Yang, Keun-Hyeok;Lee, Young-Ho
    • Journal of the Korea Institute of Building Construction
    • /
    • v.3 no.1
    • /
    • pp.139-146
    • /
    • 2003
  • The special requirements of high-performance concrete(HPC) could be enhanced property over others such as compressive strength, durability, and construction practices. In order to satisfy these requirements a series of laboratory trial mixes and following mock-up test of reinforced concrete wall at field were performed in this study. The objective of this study was to quantitatively evaluate the workability, compressive strength, and the increased heat of hydration caused by the increase of the specific weight of cement according to various variables. Six example series designed about a minimum compressive strength of 500kgf/$\textrm{cm}^2$ at 28 days, and an approximately slump and slump flow of 25cm and 60cm respectively were tested. The selection process of the specific weight of water and the percentage of fly-ash transposition determined to be most suitable for the production of HPC is presented in the following paper.

A Study on the Analysis of Multi-let Spread Mooring Systems (다점지지 계류시스템의 정적해석에 대한 연구)

  • Sin, Hyeon-Gyeong;Kim, Deok-Su
    • Journal of Ocean Engineering and Technology
    • /
    • v.9 no.2
    • /
    • pp.53-60
    • /
    • 1995
  • A multi-leg spread mooring system for floating offshore structures is important, but the multi-leg static analysis is complicated due to the nonlinear behavior of each line and the effect of current which affects each line differently. The pretensioned position of the multi-leg mooring system obtained from the static equilibrium condition changes into a different position due to external loads and current. In this paper, the new position and the static tension at each line are caculated. The relation between the initial static equilibrium position and the new position due to the external loads is expressed in terms of the Taylor's series expansion. The Runge-Kutta $4^{th}$ method is employed in analyzing the 3-dimensional static cable nonlinear equations.

  • PDF

Stock Price Prediction Based on Time Series Network (시계열 네트워크에 기반한 주가예측)

  • Park, Kang-Hee;Shin, Hyun-Jung
    • Korean Management Science Review
    • /
    • v.28 no.1
    • /
    • pp.53-60
    • /
    • 2011
  • Time series analysis methods have been traditionally used in stock price prediction. However, most of the existing methods represent some methodological limitations in reflecting influence from external factors that affect the fluctuation of stock prices, such as oil prices, exchange rates, money interest rates, and the stock price indexes of other countries. To overcome the limitations, we propose a network based method incorporating the relations between the individual company stock prices and the external factors by using a graph-based semi-supervised learning algorithm. For verifying the significance of the proposed method, it was applied to the prediction problems of company stock prices listed in the KOSPI from January 2007 to August 2008.

Bandwidth Improvement of a Multi-resonant Broadband Acoustic Transducer (다중 공진 광대역 음향변환기의 대역폭 개선)

  • Lee, Dae-Jae
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.50 no.5
    • /
    • pp.605-615
    • /
    • 2017
  • A multi-resonant broadband acoustic transducer with six Tonpilz elements operating at different resonant frequencies in a transducer assembly was fabricated, tested, and analyzed. A compensated transducer, modified by adding series inductance to the developed multi-resonant broadband transducer, was shown to provide improved bandwidth performance with a relatively more uniform frequency response compared with the uncompensated transducer. By controlling the series inductance, flat frequency response characteristics at two frequency bands were obtained over the range 38-52 kHz with 1.1 mH inductance and 50-60 kHz with 0.4 mH inductance. These results suggest that the operating frequency of the developed multi-resonant broadband transducer in a chirp echo sounder can be shifted to a different frequency band that is optimized according to the environment for more effective echo surveys of fishing grounds.

The Jugular Foramen Schwannomas : Review of the Large Surgical Series

  • Bakar, Bulent
    • Journal of Korean Neurosurgical Society
    • /
    • v.44 no.5
    • /
    • pp.285-294
    • /
    • 2008
  • Objective: Jugular foramen schwannomas are uncommon pathological conditions. This article is constituted for screening these tumors in a wide perspective. Materials: One-hundred-and-ninty-nine patients published in 19 articles between 1984 to 2007 years was collected from Medline/Index Medicus. Results: The series consist of 83 male and 98 female. The mean age of 199 operated patients was 40.4 years. The lesion located on the right side in 32 patients and on the left side in 60 patients. The most common presenting clinical symptoms were hearing loss, tinnitus, disphagia, ataxia, and hoarseness. Complete tumor removal was achieved in 159 patients. In fourteen patients tumor reappeared unexpectedly. The tumor was thought to originate from the glossopharyngeal nerve in forty seven cases; vagal nerve in twenty six cases; and cranial accessory nerve in eleven cases. The most common postoperative complications were lower cranial nerve palsy and facial nerve palsy. Cerebrospinal fluid leakage, meningitis, aspiration pneumonia and mastoiditis were seen as other complications. Conclusion: This review shows that jugular foramen schwannomas still have prominently high morbidity and those complications caused by postoperative lower cranial nerve injury are life threat.

Design of GA-Fuzzy Precompensator of TCSC-PSS for Enhancement of Power System Stability (전력계통 안정도 향상을 위한 TCSC 안정화 장치의 GA-퍼지 전 보상기 설계)

  • Wang Yong-Peel;Chung Mun-Kyu;Chung Hyeng-Hwan
    • The Transactions of the Korean Institute of Electrical Engineers A
    • /
    • v.54 no.2
    • /
    • pp.51-60
    • /
    • 2005
  • In this paper, we design the GA-fuzzy precompensator of a Power System Stabilizer for Thyristor Controlled Series Capacitor(TCSC-PSS) for enhancement of power system stability. Here a fuzzy precompensator is designed as a fuzzy logic-based precompensation approach for TCSC-PSS. This scheme is easily implemented by adding a fuzzy precompensator to an existing TCSC-PSS. And we optimize the fuzzy precompensator with a genetic algorithm for complements the demerit such as the difficulty of the component selection of fuzzy controller, namely, scaling factor, membership function and control rules. Nonlinear simulation results show that the proposed control technique is superior to conventional TCSC-PSS in dynamic responses over the wide range of operating conditions and in convinced robust and reliable in view of structure.

Prediction of Future Land use Using Times Series Landsat Images Based on CA (Cellular Automata)-Markov Technique (시계열 Landsat 영상과 CA-Markov기법을 이용한 미래 토지이용 변화 예측)

  • Lee, Yong-Jun;Pack, Geun-Ae;Kim, Seong-Joon
    • Proceedings of the KSRS Conference
    • /
    • 2007.03a
    • /
    • pp.55-60
    • /
    • 2007
  • The purpose of this study is to evaluate the temporal land cover change by gradual urbanization of Gyeongan-cheon watershed. This study used the five land use of Landsat TM satellite images(l987, 1991, 2001, 2004) which were classified by maximum likelihood method. The five land use maps examine its accuracy by error matrix and administrative district statistics. This study analyze land use patterns in the past using time.series Landsat satellite images, and predict 2004 year land use using a CA-Markov combined CA(Cellular Automata) and Markov process, and examine its appropriateness. Finally, predict 2030, 2060 year land use maps by CA-Markov model were constructed from the classified images.

  • PDF

Evaluation of Fatigue Strength in Ductile Cast Iron by Maximum and Mean Size of Graphite (최대 및 평균 구상흑연크기에 의한 구상흑연주철재의 피로강도의 평가)

  • Yoon, Myung-Jin
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.11 no.1
    • /
    • pp.82-87
    • /
    • 2012
  • For different ferrite-pearlite matrix structure, contain more than 90% spheroidal ratio of graphite, GCD 45-3, GCD 50, GCD 60 series and 70%, 80%, 90% spheroidal ratio of graphite, GCD 40, GCD 45-1, GCD 45-2 series, this paper has carried out rotary bending fatigue test, estimated maximum and mean size of spheroidal graphite, investigated correlation. It was concluded as follows. (1) Fatigue limit in $10^7$cycles and numbers of spheroidal graphite per 1$mm^2$ was linear relation. (2) projection area of graphite can be used to predict fatigue limit of Ductile Cast Iron. The Statistical distribution of extreme values of projection area of defects may be used as a guideline for the control of inclusion size in the steelmaking processes.

Optimization of DC Operating Voltage for GDT-Adopted SPD (가스방전관(GDT)을 적용한 서지보호장치 회로의 DC 동작전압 최적조건 고찰)

  • Choi, Jong-Min;Jeon, Tae-Hyun
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.26 no.7
    • /
    • pp.92-98
    • /
    • 2012
  • It is made compulsory to install SPD for the purpose of protecting electric and electronic devices when an abnormal voltage such as lightning occurs to power line using power frequency of 60Hz. Recently, the high speed communication technology utilizing power line is receiving attention again as a communication technology for smart grid. The SPD influences the performances of power line communication when using SPD and power line communication system together. In order to improve the performance of power line communication, a proposed scheme for series connection of gas discharge tube to ZnO varistor was presented. This paper measured the impacts of series connection of GDT to SPD using ZnO varistor on the limit voltage of Class III SPD. This paper also presented the DC operating voltage of GDT which satisfies the limit voltage of power line communication system and SPD simultaneously.

Compressive Behavior of 7xxx Series Al Composites Reinforced with $Al_2O_3$

  • Seo, Young-Ik;Min, Kyung-Ho;Lee, Kyu-Hwan;Kim, Young-Do
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.1063-1064
    • /
    • 2006
  • Mechanical properties of 7xxx series Al metal matrix composite (MMC) powders containing different amounts of ceramic were investigated. The ceramic contents of the starting powders were 5 wt.% or 10 wt.%. The powders were uniaxially cold compacted using a cylindrical die with a compacting pressure of 250 MPa and were sintered at $620^{\circ}C$ in a dry $N_2$ atmosphere for 60 min. For the heat treatment, sintered parts were solution treated at $475^{\circ}C$ and aged at $175^{\circ}C$. Compression tests were conducted to reveal the effect of $Al_2O_3$ particle content on the mechanical properties of the composites. Fractography was examined using a scanning electron microscope.

  • PDF