• 한국언어정보학회:학술대회논문집
• /
• 한국언어정보학회 2007년도 정기학술대회
• /
• pp.440-449
• /
• 2007

This paper provides a fine-grained analysis of Korean serial verb constructions within the HPSG framework, and covers major descriptive characteristics of the phenomena. This paper discusses constraints on serial verb constructions in terms of four aspects; transitivity, argument structure, semantic properties, and complementizers. As a result, 17 constraints have been built, which support the type hierarchies for Korean serial verb constructions. This paper also presents a sample derivation on the basis of on the constraints and the type hierarchies.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제6권2호
• /
• pp.75-84
• /
• 2002

Using good properties of an optimal normal basis of type I in a finite field ${\mathbb{F}}_{2^m}$, we present a design of a bit serial multiplier of Berlekamp type, which is very effective in computing $xy^2$. It is shown that our multiplier does not need a basis conversion process and a squaring operation is a simple permutation in our basis. Therefore our multiplier provides a fast and an efficient hardware architecture for a bit serial multiplication of two elements in ${\mathbb{F}}_{2^m}$.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.315-319
• /
• 2003

We improved quench properties of a superconducting fault current limiter (SFCL) based on YBCO thin films by their serial and parallel combinations. The SFCL consisted of 6 switching elements fabricated of 4 inch-diameter YBCO thin films. The quench currents of the switching elements were distributed between 33.9 A and 35.6 A. Simple serial connection resulted in imbalanced power dissipation between switching elements even at the quench current difference of 0.6 A. On the other hand, $2{\times}2$ and $3{\times}2$ stack combinations produced simultaneous quenches. The $3{\times}2$ stack combination showed better simultaneous quench behavior than the $2{\times}2$ stacks. This is suggested to be because the currents between switching elements in parallel connection of the $3{\times}2$ stacks were more effectively redistributed than the $2{\times}2$ stacks.

• ETRI Journal
• /
• 제32권5호
• /
• pp.713-721
• /
• 2010

E-textile technology has earned a great deal of interest in many fields; however, existing wearable network protocols are not optimized for use with conductive yarn. In this paper, some of the basic properties of conductive textiles and requirements on wearable personal area networks (PANs) are reviewed. Then, we present a wearable personal network (WPN), which is a four-layered wearable PAN using bus topology. We have designed the WPN to be a lightweight protocol to work with a variety of microcontrollers. The profile layer is provided to make the application development process easy. The data link layer exchanges frames in a master-slave manner in either the reliable or best-effort mode. The lower part of the data link layer and the physical layer of WPN are made of a fabric serial-bus interface which is capable of measuring bus signal properties and adapting to medium variation. After a formal verification of operation and performances of WPN, we implemented WPN communication modules (WCMs) on small flexible printed circuit boards. In order to demonstrate the behavior of our WPN on a textile, we designed a WPN tutorial shirt prototype using implemented WCMs and conductive yarn.

• 대한산업공학회지
• /
• 제38권2호
• /
• pp.89-97
• /
• 2012

This paper considers a manufacturer with a two-station make-to-stock and make-to-order serial production system. The MTS facility produces a single type of component and provides components for the MTO facility that produces customized products. In addition to the internal demand from the MTO facility, the MTS facility faces demands from the spot market with the option of to accept or reject each incoming demand. This paper addresses a joint component inventory rationing and batch production control which maximizes the manufacturer's profit. Using the Markov decision process model, we investigate the structural properties of the optimal inventory rationing and batch production policy, and present two types of heuristics. We implement a numerical experiment to compare the performance of the optimal and heuristic policies and a simulation study to examine the impact of the stochastic process variability on the inventory rationing and batch production control.

• 한국경영과학회지
• /
• 제31권1호
• /
• pp.105-115
• /
• 2006

In this paper, we investigate the problem of minimizing average inventory costs subject to a fill rate constraint in a two-stage serial inventory model with a normally distributed demand. Fill rate is the fraction of demand that is satisfied immediately from on-hand inventory. We first find the lower bounds of base-stock levels in each node by using the exact base-stock level that satisfies a fill rate in a single node model proposed by Sobel. And then, we extensively analyze the system and show that the cost function is convex. Using such convexity and some other useful properties, we can easily find optimal base-stock levels numerically.

• 전기학회논문지P
• /
• 제57권3호
• /
• pp.323-327
• /
• 2008

We investigated the quench characteristics of a flux-lock type superconducting fault current limiter (SFCL) depending on the methods of the serial and parallel connections between the superconducting elements. The flux-lock type SFCL consists of two coils. The primary coil is wound in parallel to the secondary coil through an iron core, and the secondary coil is connected to the superconducting elements in series and parallel. In this paper, the analyses of voltage, current, and resistance of the superconducting elements connected in serial and parallel were performed to increase the power capacity of the flux-lock type SFCL. A part of the superconducting elements was not quenched in $2{\times}2$ serial connection between the elements and then the power burden of the quenched elements was increased. However the elements with $2{\times}2$ parallel connection was all quenched. This means that the power burden of each superconducting element can be reduced under the same conditions. We found that $2{\times}2$ parallel connection was more profitable for the current limiting effects and the increase of the power capacity.

• 경영과학
• /
• 제11권1호
• /
• pp.107-115
• /
• 1994

Stochastic manufacturing systems are generally formulated as performance models of discrete event systems. In this paper, logical models(as opposed to performance models) of kanban systems are presented which are deterministic and untimed but not stochastic and timed. As a result, the first and second order properties of kanban systems are showed which can be fruitfully applied to the analysis and design of kanban systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.336-338
• /
• 2002

We improved quench properties of a superconducting fault current limiter (SFCL) based on YBCO thin films by their serial and parallel combinations. The SFCL consisted of 6 switching elements fabricated of 4 inch-diameter YBCO thin films. Simple serial connection resulted in imbalanced power dissipation between switching elements even at the quench current difference of 0.6A. On the other hand, $2{\times}2\;and\;3{\times}2$ stack combinations produced simultaneous quenches. The $3{\times}2$ stack combination showed better simultaneous quench behavior than the $2{\times}2$ stacks. This is suggested to be because the currents between switching elements in parallel connection of the $3{\times}2$ stacks were more effectively redistributed than the $2{\times}2$ stacks.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.395-402
• /
• 2016

이 논문은 직렬형 머니퓰레이터의 관성 성질을 고려하여 에너지 효율을 향상 시키기 위한 설계 방법에 대해 논하였다. 이 방법은 운동방정식에 가장 많은 영향을 끼치는 관성 행렬을 분석하여 최적화 문제의 구속 조건에 대입하는 방식이다. 이를 위해, 첫 번째로 초기에 설계된 머니퓰레이터에 대한 동적 모델링을 도출하고 여기서 표현되는 관성 행렬의 특성을 분석한다. 두 번째로 분석된 관성 행렬의 변화 정도를 정량화하는 지표를 정의하여 구속 조건과 설계 파라미터의 경계조건을 설정하였다. 마지막으로 토크를 목적 함수로 정하고 앞서 정의된 구속 조건과 경계조건을 통하여 최적화를 수행한다. 또한, 목적 함수 외에 관성, 에너지 및 질량에 관련된 보조 지표를 정의하고 최적화된 파라미터가 요구성능을 만족하는지 다시 한번 확인하는 과정을 거치는 설계 알고리즘을 제안하였다. 제안한 설계 알고리즘의 수행 결과로 토크 최소화를 통하여 에너지 효율이 향상되었으며, 제안된 방법을 공간상의3 자유도 직렬 머니퓰레이터에 시뮬레이션 테스트 하였다. 이 설계 알고리즘은 일반적으로n 자유도를 가지는 머니퓰레이터에도 적용이 가능하다.