• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.188-194
• /
• 2008

We propose the new method for the traffic signs recognition that is one of the DAS(Driving assistance system) in the intelligent vehicle. Our approach estimates a varied degree by using a geometric method from the varied traffic signs in noise, rotation and size, and extracts the recognition symbol from the compensated traffic sign for a recognition by using the sequential color-based clustering. This proposed clustering method classify the traffic sign into the attention, regulation, indication, and auxiliary class. Also, The circular tracing method is used for the final traffic sign recognition. To evaluate the effectiveness of the proposed method, varied traffic signs were built. As a result, The proposed method show that the 95 % recognition rate for a single variation, and 93 % recognition rate for a mixed variation.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.3
• /
• pp.572-580
• /
• 1996

This paper describes a test generation method for sequential circuits which improves the application limits of the IPMT method by applying the partial scan design to the IPMT method. To solve the problem that the IPMT method requires enormous computation time in image computation, and generates test patterns after the partialscan design is introduced to reduce test complexity. Scan flip-flops are selected for the partial scan design according to the node size of the state functions of a sequential circuit in their binary decision diagram representations. Experimental results on ISCAS'95 benchmark circuits show that a test generator based on our method has achieved 100% fault coverage by use of either 20% scan FFs for s344, s349, and s420 or 80% scan FFs for sl423. However, test gener-ators based on the previous IPM method have not achieved 100% fault coverage for those circuits.

• Environmental Engineering Research
• /
• v.16 no.2
• /
• pp.97-102
• /
• 2011

This study investigates the treatment of pigment wastewater using a sequential batch reactor (SBR) followed by dissolved ozone flotation-pressurized ozone oxidation treatement (DOF-$PO_2$). The process efficiency has been evaluated at the lab scale on the basis of water quality parameters. In addition, the effect of pure oxygen and air was investigated on the removal of COD, BOD, and TN in the SBR process. It was observed that under comparable conditions the removal efficiencies of these water quality parameters using pure oxygen and air were similar. The effect of the recycle rate was also investigated for its impact on the water quality parameters using different ozone dissolving pressures in a DOF process in order to optimise conditions. The results conclude that the use of an SBR and ozone contact by DOF-$PO_2$ is a highly effective treatment for pigment wastewater and aids in the achievement of effluent discharge criteria.

• Journal of Astronomy and Space Sciences
• /
• v.28 no.1
• /
• pp.63-70
• /
• 2011

The needs for satellite formation flying are gradually increasing to perform the advanced space missions in remote sensing and observation of the space or Earth. Formation flying in low Earth orbit can perform the scientific missions that cannot be realized with a single spacecraft. One of the various techniques of satellite formation flying is the determination of the precise baselines between the satellites within the formation, which has to be in company with the precision validation. In this paper, the baseline of Gravity Recovery and Climate Experiment (GRACE) A and B was determined with the real global positioning system (GPS) measurements of GRACE satellites. And baseline precision was validated with the batch and sequential processing methods using K/Ka-band ranging system (KBR) biased range measurements. Because the proposed sequential method validate the baseline precision, removing the KBR bias with the epoch difference instead of its estimation, the validating data (KBR biased range) are independent of the data validated (GPS-baseline) and this method can be applied to the real-time precision validation. The result of sequential precision validation was 1.5~3.0 mm which is similar to the batch precision validation.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.1-8
• /
• 2022

In this paper, we propose a more effective unique identifier allocation method for macro expansion in a single-process multicore parallel computing environment that does not require locks. Our key idea for such an allocation method is to remove sequential dependencies using the remainder operation. We confirmed that our lock-free method is suitable for improving the performance of parallel macro expansion through the following benchmark: we patched an existing library, which is based on a sequential unique identifier allocation, with our proposed method, and compared the performances of the same program but using two different versions of the library, before and after the patch.

• Structural Engineering and Mechanics
• /
• v.26 no.5
• /
• pp.499-516
• /
• 2007

An experimental method denoted as Impulse Method is proposed as a cost-effective non-destructive technique for the on-site evaluation of concrete elastic modulus in existing structures: on the basis of Hertz's quasi-static theory of elastic impact and with the aid of a simple portable testing equipment, it makes it possible to collect series of local measurements of the elastic modulus in an easy way and in a very short time. A Hypothesis Testing procedure is developed in order to provide a statistical tool for processing the data collected by means of the Impulse Method and assessing the possible occurrence of significant variations in the elastic modulus without exceeding some prescribed error probabilities. It is based on a particular formulation of the renowned sequential probability ratio test and reveals to be optimal with respect to the error probabilities and the required number of observations, thus further improving the time-effectiveness of the Impulse Method. The results of an experimental investigation on different types of plain concrete prove the validity of the Impulse Method in estimating the unknown value of the elastic modulus and attest the effectiveness of the proposed Hypothesis Testing procedure in identifying significant variations in the elastic modulus.

• Environmental Analysis Health and Toxicology
• /
• v.14 no.3
• /
• pp.75-79
• /
• 1999

Due to increasing marine pollution there is a great possibility that seaweed is contaminated with polycyclic aromatic hydrocarbons (PAHs). To investigate the effect of processing on PAM removal from Porphyra tenera (laver) contaminated PAH, laver was contaminated with fluoranthene known to have a strong photoinduced toxicity, followed by washings and drying, which are usual processes for dried laver preparation. Sample at each step was collected and its toxicity was evaluated using cultured animal cells as well as analyzing PAH contents. Fluoranthene level in laver was significantly lowered by sequential washings with sea water and distilled water, but not by drying. Fluoranthene content in raw laver right after contamination was 221 ppm and decreased to 130 ppm by washings with seawater plus distilled water while its level was not lurker lowered by drying process. Cytotoxicity and photoinduced cytotoxicity in mammalian cells were significantly elevated in laver extracts containing fluoranthene. Cellular arylhydrocarbon hydroxylase (AHH), one of the biomarkers for cellular accumulation of PAH, was greatly induced by laver extract contaminated with fluoranthene. These results suggest that photoinduced toxicity and AHH activity can be used to monitor contamination of seafood by PAHs. Fluoranthene accumulated in laver was efficiently removed by sequential washings with seawater and tap water for 24 hrs and 12 hrs, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.6
• /
• pp.1260-1268
• /
• 2005

Ladder Diagram(LD) is the most extensively used among PLC standard language for the design of control system. But LD has the disadvantages for data processing and maintenance. On the other hand, the Sequential Function Chart(SFC) graphic language is very powerful for describing the sequential logic control algorithm. SFC is based on flow chart, so control flow understanding is very easy and divergence can possible improving its ability. In this paper, we propose the efficient management elevator system using the action qualifiers and choice divergence. From the result, we confirm the SFC language reduced program memory capacity and processing time is faster than LD language.

• Journal of KIISE:Software and Applications
• /
• v.26 no.10
• /
• pp.1178-1178
• /
• 1999

A spatial join has the property that its execution time exponentially increases in proportion to the number of spatial objects. Recently, there have been many attempts for improving the performance of the spatial join by using parallel processing schemes, In the case of executing parallel spatial join using the parallel machine with shared disk architecture, the disk bottleneck of parallel processing of spatial join worsens in comparison with sequential spatial join. This paper presents the algorithms of task creation and assignment to reduce the disk bottleneck caused by accessing the shared disk at the same time, and to minimize message passing between processors, This paper proposes object caching which is a higher level of abstraction than page caching, and uses it to do creation and assignment of tasks according to temporal and spatial localities for minimizing disk access time. The object caching shows the performance improvement of 50%. The task creation and assignment using localities gives the gain of 30% and 20%. Overall performance evaluation of the proposed algorithms shows 7.2 times speed up than those of sequential execution of spatial joins.

• The Journal of Korean Physical Therapy
• /
• v.23 no.3
• /
• pp.65-70
• /
• 2011

Purpose: We investigated the changes in the stop-signal reaction time (SSRT) and the no-signal reaction time (NSRT) following motor sequential learning in the stop-signal task (SST). This study also determined which of the reduction0s of spatial processing time was better between blocked- and random-SST. Methods: Thirty right-handed healthy subjects without a history of neurological dysfunction were recruited. In all subjects, both the SSRT and the NSRT were measured for the SST. Tasks were classified into two categories based on the stop-signal patterns, the blocked-SST practice group and random-SST practice group. All subjects gave written informed consent. Results: In the blocked-SST group, both the SSRT and the NSRT was significantly decreased (p<0.05) but not significantly changed in the random-SST group. In the SSRT and the NSRT, the blocked-SST group was faster than the random-SST group (p<0.05). In the post-test SST after practice of each group, the SSRT was significantly decreased in the random-SST group (p<0.05), but the NSRT showed no significant changes in either group. Conclusion: These findings demonstrate that random-SST practice resulted in a decrease in internal processing times needed for a rapid stop to visual signals, indicating motor skill learning is acquired through improved response selection and inhibition.