• Journal of Welding and Joining
• /
• v.27 no.5
• /
• pp.81-87
• /
• 2009

Recently, extruded aluminium-alloy panels have been used in the car bodies for the purpose of the light-weight of railway vehicles and FSW(Friction Stir Welding), which is superior to the arc weldings, has been applied in the railway vehicles. This paper presents the optimum design of the FSW process on A6005 extruded alloy for railway vehicles to improve its mechanical properties. Rotational speed, welding speed and tilting angle of the tool tip were chosen as design parameters. Three objective functions were determined; maximizing the tensile strength, minimizing the hardness and maximizing the difference between the normalized tensile strength and hardness. The tensile tests and the hardness tests for fifteen FSW experiments were carried out according to the central composite design table. Recursive model functions on three characteristic values, such as the tensile strength, the hardness difference(${\Delta}Hv$) and the difference of normalized tensile strength and ${\Delta}Hv$, were estimated according to the classical response surface analysis methodology. The reliability of each recursive function was verified by F-test using the analysis of variance table. Sensitivity analysis on each characteristic value was done. Finally, the optimum values of three design parameters were found using Sequential Quadratic Programming algorithm.

• The KIPS Transactions:PartD
• /
• v.13D no.7 s.110
• /
• pp.1027-1038
• /
• 2006

There are many technical problems in the recommendation system based on very large database(VLDB). So, it is necessary to study the recommendation system' structure and the data-mining technique suitable for the large scale Internet shopping mail. Thus we design and implement the product recommendation system using k-means clustering algorithm and sequential pattern technique which can be used in large scale Internet shopping mall. This paper processes user information by batch processing, defines the various categories by hierarchical structure, and uses a sequential pattern mining technique for the search engine. For predictive modeling and experiment, we use the real data(user's interest and preference of given category) extracted from log file of the major Internet shopping mall in Korea during 30 days. And we define PRP(Predictive Recommend Precision), PRR(Predictive Recommend Recall), and PF1(Predictive Factor One-measure) for evaluation. In the result of experiments, the best recommendation time and the best learning time of our system are much as O(N) and the values of measures are very excellent.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.33-44
• /
• 2006

As many scientific phenomena are now investigated using complex computer models, the effective use of Kriging on physical problems has been expanded to provide global approximations for optimization problems. This paper is focused on the two types of strategies to improve efficiency and accuracy of approximate optimization models using Kriging. These methods are performed by the stochastic process, stochastic-localization method(SLM), as the criterion to move the local domains and the design of experiments(DOE), the classical design and space-filling design. The proposed methodology is applied to the designs of 3-bar truss, Sandgren's pressure vessel, and honeycomb upper platform of a satellite structure.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.284-291
• /
• 2000

A basic pulse tube refrigerator has been constructed with extensive instrumentation to study the characteristics of the heat exchanger experimentally under the oscillating pressure and the oscillating flow. This paper describes the sequential experiments with the basic pulse tube refrigerator. The experiments were performed for various cycle frequencies under the square pressure wave forms. First, the heat flux was measured through the cycle at the both cold and warm end heat exchangers without the regenerator. In order to enhance the thermal communication capability of the heat exchanger with the gas at low operating frequencies, a unique design of the triangular shape radial fin concept was applied to the heat exchangers. For the fin heat exchanger, the measured heat flux and the calculated heat flux from the two well-known oscillating heat transfer correlations were compared and discussed. Second, the regenerator was added to the pulse tube to make a basic pulse tube refrigerator configuration. The experiment showed the great impact of the regenerator on the temperature and the heat flux profiles. At the warm-end, the cyclic averaged heat flux had its maximum value at the specific operating frequency. The paper presents the explanation of the surface heat pumping effect as well as the experimental data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.281-286
• /
• 2006

본 연구의 목적은 차세대 대체에너지로 각광받는 풍력발전 중에서 육상발전보다 여러 가지 이점이 있는 한국형 해상풍력터빈 블레이드의 최적형상설계를 위한 알고리즘을 구현하는 것이다. 블레이드 단면 익형의 양력과 항력 분포는 XFOIL을 이용하여 예측하였다. 첫 번째 수준의 설계변수인 각각의 블레이드 지름과 축 회전수에서 익형의 공력변수들과 최소에너지손실 조건을 이용하여 두 번째 설계변수인 각 블레이드 단면에서의 시위길이와 피치각 분포를 최적화하였다. 그리고 성능결과를 바탕으로 반응면을 구성하고, 확률적 방법을 이용하여 타당성 있는 설계공간까지 첫 번째 설계변수를 이동시키고 구배최적화 기법을 통해 각각의 제약함수를 만족하면서 목적함수를 죄대로 하는 최적블레이드 형상을 구현하였다. 설계된 최적형상에 대해 탈설계점 해석을 수행하여 성능을 구하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2966-2977
• /
• 1996

As design of very large circuits is made possible by rapid development of VLSI technologies, efficient fault simulation is needed. Ingeneral, fault simulation requires many computer resources. As general-purpose multiprocessors become more common and affordable, these seem to be an attractive and effective alternative for fault simulation. Efficient fault simulation of synchronous sequential circuits has been reported to be attainably by using a linear iterative array model for such a circuit, and combining parallel fault simulation with russogate fault simulation. Such fault simulation algorithm is parallelized on a general-purpose multiprocessor with shard memory for acceleration of fault simulation. Through the experimenal study, the effect of the number of processors on speed-up of simulation, processor utilization, and the effect of multiprocessor hardware on simulation performance are studied. Some results for experiments with benchmark circuits are shown.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.4
• /
• pp.135-138
• /
• 2016

It was observed that the single grain of crystallite growth behavior in AlN (Aluminum Nitride) single crystal growth by PVT (Physical Vapor Transport) method. The single grain of AlN was grown in sequent experiments and adjacent crystallites were joined together after small grain was grown. The sequential results of those grains observed by stereoscopic microscope were reported.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.2
• /
• pp.74-81
• /
• 2008

This paper describes a low-cost omnidirectional camera system designed for the intruder detection capability of a security robot. Moving targets on sequential images are detected first by an adaptive background subtraction technique, and the targets are identified as intruders if they fail to enter a password within a preset time. A warning message is then sent to the owner's mobile phone. The owner can check scene pictures posted by the system on the web. The system developed worked well in experiments including a situation when the indoor lighting was suddenly changed.

• MALSORI
• /
• no.60
• /
• pp.125-144
• /
• 2006

W3C announced a standard software architecture for multimodal context-aware middleware that emphasizes modularity and separates structure, contents, and presentation. We implemented a distributed multimodal interface system followed the W3C architecture, based on SCXML. SCXML uses parallel states to invoke both XHTML and VoiceXML contents as well as to gather composite or sequential multimodal inputs through man-machine interactions. We also hire Delivery Context Interface(DCI) module and an external service bundle enabling middleware to support context-awareness services for real world environments. The provision of personalized user interfaces for mobile devices is expected to be used for different devices with a wide variety of capabilities and interaction modalities. We demonstrated the implemented middleware could maintain multimodal scenarios in a clear, concise and consistent manner by some experiments.

• Journal of Korean Society for Quality Management
• /
• v.48 no.1
• /
• pp.51-68
• /
• 2020

Purpose: The primary objective of this research is to develop the optimal operating conditions as well as their associated design spaces for a Cryogenic Submerged Arc Welding(SAW) process by improving its quality and productivity simultaneously. Methods: In order to investigate functional relationships among quality characteristics and their associated control factors of an SAW process, a stepwise design of experiment(DoE) method is proposed in this paper. Based on the DoE results, not only a multi-dimensional design space but also a safe operating space and normal acceptable range(NAR) by integrating statistical confidence intervals were demonstrated. In addition, the optimal operating conditions within the proposed NAR can be obtained by a robust optimal design method. Results: This study provides a customized stepwise DoE method (i.e., a sequential set of DoE such as a factorial design and a central composite design) for Cryogenic SAW process and its statistical analysis results. DoE results can then provide both the main and interaction effects of input control factors and the functional relationships between the input factors and their associated output responses. Maximizing both the product quality with high impact strength and the productivity with minimum processing times simultaneously in a case study, we proposed a design space which can provide both acceptable productivity and quality levels and NARs of input control factors. In order to confirm the optimal factor settings and the proposed NARs, validation experiments were performed. Conclusion: This research may provide significant contributions and applications to many SAW problems by preparing a standardization of the functional relationship between the input factors and their associated output response. Moreover, the proposed design space based on DoE and NAR methods can simultaneously consider a number of quality characteristics including tradeoff between productivity and quality levels.