• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.714-718
• /
• 2009

3D reconstruction of a human face from an image sequence remains an important problem in computer vision. We propose a method, based on a factorization algorithm, that reconstructs a 3D face model from short image sequences exhibiting rotational motion. Factorization algorithms can recover structure and motion simultaneously from one image sequence, but they usually require that all feature points be well tracked. Under rotational motion, however, feature tracking often fails due to occlusion and frame out of features. Additionally, the paucity of images may make feature tracking more difficult or decrease reconstruction accuracy. The proposed 3D reconstruction approach can handle short image sequences exhibiting rotational motion wherein feature points are likely to be missing. We implement the proposal as a reconstruction method; it employs image sequence division and a feature tracking method that uses Active Appearance Models to avoid the failure of feature tracking. Experiments conducted on an image sequence of a human face demonstrate the effectiveness of the proposed method.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4080-4092
• /
• 2021

In this study, the performance of sequence tracking methods for multiple interaction events in specific CdZnTe Compton imagers was evaluated using Monte Carlo simulations. The Compton imager consisted of a 6 × 6 array of virtual Frisch-grid CZT crystals, where the dimensions of each crystal were 5 × 5 × 12 mm³. The sequence tracking methods for another Compton imager that consists of two identical CZT crystals arrays were also evaluated. When 662 keV radiation was incident on the detectors, the percentages of the correct sequences determined by the simple comparison and deterministic methods for two sequential interactions were identical (~80%), while those evaluated using the minimum squared difference method (55-59%) and Three Compton method (45-55%) for three sequential interactions, differed from each other. The reconstructed images of a 662 keV point source detected using single and double arrays were evaluated based on their angular resolution and signal-to-noise ratio, and the results showed that the double arrays outperformed single arrays.

• Journal of Information Processing Systems
• /
• v.13 no.5
• /
• pp.1213-1228
• /
• 2017

The pitch tracking of music has been researched for several decades. Several possible improvements are available for creating a good t-distribution, using the instantaneous robust algorithm for pitch tracking framework to perfectly detect pitch. This article shows how to detect the pitch of music utilizing an improved detection method which applies a statistical method; this approach uses a pitch track, or a sequence of frequency bin numbers. This sequence is used to create an index that offers useful features for comparing similar songs. The pitch frequency spectrum is extracted using a modified instantaneous robust algorithm for pitch tracking (IRAPT) as a base combined with the statistical method. The pitch detection algorithm was implemented, and the percentage of performance matching in Thai classical music was assessed in order to test the accuracy of the algorithm. We used the longest common subsequence to compare the similarities in pitch sequence alignments in the music. The experimental results of this research show that the accuracy of retrieval of Thai classical music using the t-distribution of instantaneous robust algorithm for pitch tracking (t-IRAPT) is 99.01%, and is in the top five ranking, with the shortest query sample being five seconds long.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.1-8
• /
• 2000

In this paper, we formulate an optimal control problem to obtain the optimal signal strength and detection threshold for tracking with NN filter, First, we predict the tracking performance of NN filter by using the HYCA method. Based on this method, the predicted tracking performance is represented with respect to signal strength and detection threshold. Using this relation, we find the optimal parameters for following three examples： 1) the sequence of optimal detection threshold which minimizes sum of position estimation error； 2) the sequence of optimal detection threshold which minimizes sum of validation gate volume； and 3) the sequence of optimal signal strength and detection threshold which minimizes sum of signal strength.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.149-160
• /
• 2017

To improve the performance of sensorless induction motor (IM) drives, an adaptive speed estimation method based on a strong tracking extended Kalman filter with a least-square algorithm (LS-STEKF) for induction motors is proposed in this paper. With this method, a fading factor is introduced into the covariance matrix of the predicted state, which forces the innovation sequence orthogonal to each other and tunes the gain matrix online. In addition, the estimation error is adjusted adaptively and the mutational state is tracked fast. Simultaneously, the fading factor can be continuously self-tuned with the least-square algorithm according to the innovation sequence. The application of the least-square algorithm guarantees that the information in the innovation sequence is extracted as much as possible and as quickly as possible. Therefore, the proposed method improves the model adaptability in terms of actual systems and environmental variations, and reduces the speed estimation error. The correctness and the effectiveness of the proposed method are verified by experimental results.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.95-101
• /
• 2014

This paper explains effective tracking method for a vehicle cutting in a line on the road automatically. The method employs KLT based on optical flow using play-back image sequence. Main contribution of this paper is play-back image sequence that is in order image frames for rewind direction from a reference point in time. The moment when recognizing camera can read a license plate very well can usually be the reference point in time. The biggest images of object traced can usually be obtained at this moment also. When optic flow is applied, the bigger image of the object traced can be obtained, the more feature points can be obtained. More many feature points bring good result of tracking object. After the recognizing cameras read a license plate on the vehicle suspected of cut-in-line violation, and then the system extracts the play-back image sequence from the tracking cameras for watching wide range. This paper compares using play-back image sequence as normal method for tracking to using play-forward image sequence as suggested method on the results of the experiment and also shows the suggested algorithm has a good performance that can be applied to the unmanned system for watching cut-in-line violation.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.622-625
• /
• 2001

Photovoltaic generation systems need MPPT (Maximum Power Point Tracking) control because the output power depends on the operating voltage and current. Therefore, many researchers propose various types of MPPT control methods. A new MPPT control scheme is proposed in this paper in order to realize higher efficiency with simple calculation. The line search algorithm with fibonacci sequence which is one of the optimizing method is employed for the MPPT. The line search method is modified for real-time operation. The method is verified by simulations and experiments. It is concluded that the scheme can respond fast variation of irradiance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1377-1381
• /
• 2003

This paper describes real time object tracking of 3D objects in 2D image sequences. The moving objects are segmented from the image sequence using morphological operations. The moving objects are segmented by the method of differential image followed by the process of morphological dilation. The moving objects are recognized and tracked using statistical moments. The direction of moving objects are determined by the Hough transform. The straight lines in the moving objects are found with the help of Hough transform. The direction of the moving object is calculated from the orientation of the straight lines in the direction of the principal axes of the moving objects. The direction of the moving object and the displacement of the object in the image sequence is used to calculate the velocity of the moving objects. The simulation results of the proposed method are promising on the test images.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.621-624
• /
• 1999

This paper describes a distance estimation method of object's motion in soccer image sequence by tracking field features. And we quantitatively evaluate the estimation accuracy We suppose that the input image sequence is taken with a camera on static axis and includes only zooming and panning transformation between frames. Adaptive template matching is adopted for non-rigid object tracking. For background compensation, feature templates selected from reference frame image are matched in following frames and the matched feature point pairs are used in computing Affine motion parameters. A perspective displacement field model is used for estimating the real distance between two position on Input Image. To quantitatively evaluate the accuracy of the estimation, we synthesized a 3 dimensional virtual stadium with graphic tools and experimented on the synthesized 2 dimensional image sequences. The experiment shows that the average of the error between the actual moving distance and the estimated distance is 1.84%.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.1
• /
• pp.69-76
• /
• 2010

The segmentation of moving object in video sequence is a core technique of intelligent image processing system such as video surveillance, traffic monitoring and human tracking. A typical method to segment a moving region from the background is the background subtraction. The steps of background subtraction involve calculating a reference image, subtracting new frame from reference image and then thresholding the subtracted result. One of famous background modeling is Gaussian mixture model (GMM). Even though the method is known efficient and exact, GMM suffers from a problem that includes false pixels in ROI (region of interest), specifically shadow pixels. These false pixels cause fail of the post-processing tasks such as tracking and object recognition. This paper presents a method for removing false pixels included in ROT. First, we subdivide a ROI by using shape characteristics of detected objects. Then, a method is proposed to classify pixels from using histogram characteristic and comparing difference of energy that converts the color value of pixel into grayscale value, in order to estimate whether the pixels belong to moving object area or shadow area. The method is applied to real video sequence and the performance is verified.