• 한국연소학회지
• /
• 제17권3호
• /
• pp.30-45
• /
• 2012

An existing unit of power plant is considered to refurbish it for possible application of carbon capture and storage(CCS). Conceptual design of the plant includes basic considerations on the national and international situation of energy use, environmental concerns, required budget, and time schedule as well as the engineering concept of the plant. While major equipment of the recently upgraded power plant is going to be reused, a new boiler for air-oxy fired dual mode operation is to be designed. Cryogenic air separation unit is considered for optimized capacity, and combustion system accommodates flue gas recirculation with multiple cleaning and humidity removal units. The flue gas is purified for carbon dioxide separation and treatment. This paper presents the background of the project, participants, and industrial background. Proposed concept of the plant operation is discussed for the possible considerations on the engineering designs.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권8호
• /
• pp.813-818
• /
• 1996

Amorphous As$_{10}$Ge$_{15}$ Te$_{75}$ device shows the memory switching characteristics under d.c. bias. In bulk material, a-As$_{10}$Ge$_{15}$ Te$_{75}$ switching threshold voltage (V$_{th}$) is very high (above 100 volts), but in the case of thin film, V$_{th}$ decreases to a few or ten a few volts. The characteristics of V$_{th}$ depends on the physical dimensions such as the thickness of thin film and the separation between d.c. electrodes, and the annealing conditions. The switching threshold voltage decreases exponentially with increasing annealing temperature and annealing time, but increases linearly with the thickness of thin film and exponentially with increasing the separation between d.c. electrodes. The desirable low switching threshold voltage, therefore, can be obtained by the stabilization through annealing and changing physical dimensions.imensions.sions.

• Journal of Ginseng Research
• /
• 제8권1호
• /
• pp.32-37
• /
• 1984

In order to shorten the extraction time of saponin in ginseng products, election with Extrelut column and phase-separation methods were compared. The results obtained are as follows. 1. Saponin of ginseng products was extracted completely within 3 hours by election method with Extrelut column, and the rate of removing glucose by the column was increased with increasing glucose content in ginseng products. 2. Stirring method was superior to refluxing method for removing sugars from ginseng products, and removing rate was deceased in the order of lactose, sucrose and glucose. 3. Extraction rate of ginsenoside from ginseng extracts by the elution method was nearly same as that of phase-separation method; however, the former was much higher than the latter in the case of ginseng teas. Therefore, the elution by Extrelut column is to be improper for extraction of saponin in ginseng tea which contains much sugar. It was necessary to remove lipophilic compounds for extraction of saponin from ginseng extracts by elution with Extrelut column.

• 말소리와 음성과학
• /
• 제7권4호
• /
• pp.17-25
• /
• 2015

For blind source separation of convolutive mixtures, FDICA(Frequency Domain Independent Component Analysis) algorithms are generally used. Since FDICA algorithm such as Sawada FDICA, IVA(Independent Vector Analysis) works on the frequency bin basis with a natural gradient descent method, it takes much time to converge. In this paper, we propose a new method to improve convergence speed in FDICA algorithm. The proposed method reduces the number of iteration drastically in the process of natural gradient descent method by applying a weighted inner product constraint of unmixing matrix. Experimental results have shown that the proposed method achieved large improvement of convergence speed without degrading the separation performance of the baseline algorithms.

• 한국산업융합학회 논문집
• /
• 제2권2호
• /
• pp.83-90
• /
• 1999

A cellulose acetate membrane containing silver nitrate was prepared by gelatinizing in water at $2^{\circ}C$ after evaporating solvent from the casting solution on a glass plate. Permeation experiments for oxygen and nitrogen were conducted in the ranges of temperature, $5-40^{\circ}C$ and pressure difference, $1-5kg/cm^2$ in order to investigate the effects of temperature and pressure difference on permeation characteristics of the membrane. When the evaporation time was increased, the permeability of oxygen decreased but the separation factor of oxygen against nitrogen increased since a more dense layer was formed on the membrane surface. When the silver nitrate was added, the permeation flux was doubled and the separation factor was improved from 3.0 to 3.3. This implies that silver nitrate acts as an oxygen carrier in the membrane.

• 대한핵의학회지
• /
• 제20권1호
• /
• pp.75-83
• /
• 1986

Various TSH RIA kit components were prepared. Conditions for $^{125}I$ labelling of h-TSH were optimized by diminishing the amount of chloramine-T, ertending reaction time and lowering reaction temperature. Yield, specific activity, and immunological activity could be maintained moderately under such mild reaction conditions. The mixture of polyethyleneglycol(PEG) and second antibody worked effectively as a B/F separation agent. Even though the mixture was made with more diluted PEG and second antibody than those of using the sole component separately, the tine required for the B/F separation was shorter in case of using the mixture. The sequential saturation technique was efficient than those of applying ordinary equilibrium saturation technique in assay sensitivity and assay precision points of view.

• 한국표면공학회지
• /
• 제15권2호
• /
• pp.69-76
• /
• 1982

With a view to manufacturing membranes for separation of gas mixtures, Al foils were anodized in a 2% oxalic-acid electrolyte at 40V and 80V. When anodizing was completed and Barrier layer existed at the extreme back site of the foil, the anodized foil was made to react with only electrolyte, with switching off the electric power. When the size and density of pores were changed through voltage change, the membr-anes did not show large difference in the permeability. Reacting with electrolyte, the existing Barrier layer turns into porous layer. During this process, several small pores grow from one relatively large pore, getting to the back site. The number and size of the small pores getting to the back surface increase as time passing. This change of Barrier layer into porous layer is thought to be directly related to the permeability change of the membranes. The selectivity of an anodized Al membrane was not related to the voltage change, and was high, being similar to the theoretical selctivity of metallic membranes, according to my observation.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.78-83
• /
• 2000

It is often necessary to observe the working environment of a robot to control it efficiently in the remote location. The remote sensing data and control commands are transmitted via various media such as radio, microwave, and computer network. The World Wide Web can be used as the infrastructure for teleoperation of mobile robots. In this paper we propose an advanced technique of the remote control of mobile robots on the web. For the real-time control, the image separation algorithm is proposed to transmit the current positions of mobile robots instead of transmitting the full frame image. It is shown by experiments that the proposed algorithm is effective.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1993년도 춘계 총회 및 학술발표회
• /
• pp.41-41
• /
• 1993

Recently, the advanced membrane separation technology has even been applied to the post treatment to biological process of wastewater treatment, since the efficiency of biological treatment significantly depends on maintaining a high biomass concentration in the bioreator. Particularly, anaerobic microbes in the biological system have slower growth rates than aerobic microbes and thus it takes a long hydaulic retention time(HRT) to prevent biomass washout in the completely mixed anaerobic digester. The anaerobic sludge also has poor settleability owing to its diffusible and somewhat filamentous nature. Moreover, the residual gasification and consequent sludge rise in the clarifier compartment become a considerable problem, which proves that complete separation of biological solids is difficult.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.241-244
• /
• 2000

This paper addresses a new method of blind source separation (BSS) when sources are nonstationary signals. Our method requires only multiple correlation matrices of the observed data at several time-windowed data frames to estimate the mixing matrix. In contrast to most existing BSS methods where higher-order statistics is necessary, our method is based on only second-order statistics. In the framework of correlation matching, we develop a new BSS algorithm. The useful behavior of the proposed method is verified by numerical experiments.