• 멤브레인
• /
• 제24권2호
• /
• pp.100-106
• /
• 2014

본 연구에서는 용해성 폴리이미드 합성을 위해 지환족(alicyclic) dianhydride 단량체인 5-(2,5-dioxotetrahydrofuryl)-3-methyl-3-cyclohexene-1,2-dicarboxylic anhydride (DOCDA)와 diamine으로는 4,4'-diaminodiphenylether (ODA), 1,4-phenylenediamine (p-PDA)를 사용하여 두 가지 폴리이미드를 제조한 후 그 특성을 고찰하고 기체투과특성을 알아보았다. 제조된 폴리이미드는 FT-IR을 통해 합성이 성공적으로 이루어졌음을 확인하였고 DSC를 통하여 열적 안정성을 알아보았다. 제조된 폴리이미드막의 $CH_4$와 $CO_2$에 대한 기체투과계수(P)와 이상 선택도는 time-lag 장비로 측정하였다. 그 결과, DOCDA-ODA, DOCDA-p-PDA의 경우 $CO_2$의 투과도는 각각 6.10, 0.74 barrer로 나타났고 $CO_2/CH_4$의 선택도는 67.03, 46.25의 결과를 나타내었다. 두 가지 폴리이미드 중 DOCDA-ODA의 경우 폴리이미드 재료의 특성인 우수한 투과도 및 선택도로 새로운 기체분리막으로서의 이용가능성을 나타내었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제7권3호
• /
• pp.140-150
• /
• 2007

A simple, label-free microfluidic cell purification method is presented for separation of cancer cells by exploiting difference in cell adhesion. To maximize the adhesion difference, three types of polymeric nanostructures (50nm pillars, 50nm perpendicular and 50nm parallel lines with respect to the direction of flow) were fabricated using UV-assisted capillary moulding and included inside a polydimethylsiloxane (PDMS) microfluidic channel bonded onto glass substrate. The adhesion force of human breast epithelial cells (MCF10A) and human breast carcinoma (MCF7) was measured independently by injecting each cell line into the microfluidic device followed by culture for a period of time (e.g., one, two, and three hours). Then, the cells bound to the floor of a microfluidic channel were detached by increasing the flow rate of medium in a stepwise fashion. It was found that the adhesion force of MCF10A was always higher than that of MCF cells regardless of culture time and surface nanotopography at all flow rates, resulting in a label-free detection and separation of cancer cells. For the cell types used in our study, the optimum separation was found for 2 hours culture on 50nm parallel line pattern followed by flow-induced detachment at a flow rate of $300{\mu}l/min$.

• 한국농공학회논문집
• /
• 제59권2호
• /
• pp.1-11
• /
• 2017

The analysis of baseflow contribution is very significant in Korea because most rivers have high variability of streamflow due to the monsoon climate. Recently, the importance of such analysis is being more evident especially in terms of river management because of the changing pattern of rainfall and runoff resulted from climate change. Various baseflow separation methods have been developed to separate baseflow from streamflow. However, it is very difficult to identify which method is the most accurate way due to the lack of measured baseflow data. Moreover, it is inappropriate to analyze the annual baseflow contribution for Korean rivers because rainfall patterns varies significantly with the seasons. Thus, this study compared the baseflow contributions at various time-scales (annual, seasonal and monthly) for the 4 major river basins through BFI (baseflow index) and suggested baseflow contribution of each basin by the BFI ranges searched from different baseflow separation methods (e.g., BFLOW, HYSEP, PART, WHAT). Based on the comparison of baseflow contributions at the three time scales, this study showed that the baseflow contributions from the monthly and seasonal analysis are more reasonable than that from the annual analysis. Furthermore, this study proposes that defining BFI with its range is more proper than a specific value for a watershed, considering the difference of BFIs between various baseflow separation methods.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.79-83
• /
• 2012

Objectives: The purpose of this study was to evaluate the relation between intentionally induced internal stress and cyclic fatigue failure of .06 taper ProFile. Materials and Methods: Length 25 mm, .06 taper ProFile (Dentsply Maillefer), and size 20, 25, 30, 35 and 40 were used in this study. To give the internal stress, the rotary NiTi files were put into the .02 taper, Endo-Training-Bloc (Dentsply Maillefer) until auto-stop by torque controlled motor. Rotary NiTi files were grouped by the number of induced internal stress and randomly distributed among one control group and three experimental groups (n = 10, Stress 0 [control], Stress 1, Stress 2 and Stress 3). For cyclic fatigue measurement, time for separation of the rotary NiTi files was recorded. The fractured surfaces were observed by field emission scanning electron microscope (FE-SEM, SU-70, Hitachi). The time for separation was statistically analyzed using two-way ANOVA and post-hoc Scheffe test at 95% level. Results: In .06 taper ProFile size 20, 25, 30, 35 and 40, there were statistically significant difference on time for separation between control group and the other groups (p < 0.05). Conclusion: In the limitation of this study, cyclic fatigue failure of .06 taper ProFile is influenced by internal stress accumulated in the files.

• Korean Chemical Engineering Research
• /
• 제59권1호
• /
• pp.106-111
• /
• 2021

본 연구에서는 식물세포 Taxus chinensis로부터 항암물질 파클리탁셀을 효율적으로 정제하기 위하여, 초음파 기반 마이셀 추출 공정을 개발하였다. 전통적 마이셀 공정(대조군)에서의 많은 추출 단계 및 긴 상 분리 시간 문제를 획기적으로 개선하였다. 초음파 파워 180 W, 초음파 조사 1.5 시간에서 가장 높은 파클리탁셀 수율(~96%, 2회 추출)을 얻었으며, 이는 대조군의 수율에 비해 24.7% 증가하였다. 또한 분배 계수(K)는 초음파 파워 180 W, 초음파 조사 1.5 시간에서 최대치(24.0)를 보였다. 파클리탁셀 순도에는 큰 차이가 없었으며, 초기 파클리탁셀의 순도(6.81%)가 정제 후 22%까지 증가하였다. 역 추출(back extraction)의 상 분리 시간은 대조군 대비 각각 40.7-56.2%(초음파 파워 80 W), 46.3-67.6%( 초음파 파워 180 W), 51.9-67.6%(초음파 파워 250 W) 감소하였다. 초음파 파워(80-250 W)와 초음파 조사 시간(0.5-2.5 시간)이 증가할수록 상 분리 시간이 감소하였다.

• 대한기계학회논문집
• /
• 제19권4호
• /
• pp.1134-1147
• /
• 1995

POD (proper orthogonal decomposition) is applied to turbulent leading-edge separation bubble to extract coherent structures. A two-dimensional leading-edge separation bubble is simulated by discrete-vortex method, where a time-dependent source forcing is incorporated. Based on the wealth of numerical data, POD is applied in a range of the forcing amplitude ( $A_{o}$ = 0, 0.5, 1.0 and 1.5) and forcing frequency (0 .leq. $f_{F}$H/ $U_{\infty}$.leq. 0.3). It is demonstrated that the structures of POD have noticeable changes with local forcings. In an effort to investigate the mechanism of decreasing reattachment length, dynamic behaviors of the expansion coefficients and contributions of the eigenfunctions of POD are scrutinized. As the forcing amplitude increases, the large-scale vortex structures are formed near the forcing amplitude increases, the large-scale vortex structures are formed near the separation point and the flow structures become more organized and more regular, accompanying with the reduction of reattachment length. By further inverstigation of POD global entropy, it is seen that the reattachment length is closely linked to the degree of organization of the flow structures.es.s.

• 분석과학
• /
• 제17권5호
• /
• pp.438-442
• /
• 2004

To determine the contents of $^{99}Tc$ in the spent PWR (pressurized water reactor) nuclear fuels by ICP-MS (inductively coupled plasma-mass spectrometry), a technetium separation method using an extraction chromatographic resin (TEVA Spec resin) has been established. $^{99}Tc$ was separated from a spent PWR nuclear fuel solution by this separation procedure and its concentration was determined by ICP-MS. The result agrees well with the value calculated by the program ORIGEN 2 and also the value measured by AG MP-1 resin/ICP-MS method described in our previous paper. It can be concluded that the present separation procedure is superior to the AG MP-1 resin procedure with respect to the time required for technetium separation as well as the efficiency of decontamination from other radioactive nuclides.

• 자원리싸이클링
• /
• 제7권5호
• /
• pp.26-32
• /
• 1998

폐플라스틱은 종류가 다양하고 분리가 어려워 재활용이 상당히 제한되어 있다. 본 연구에서는 폐플라스틱의 재활용을 위하여 PVC/PET 혼합물에서 두 물질을 분리하는 연구를 수행하였다. PVC/PET 표면의 물리화학적인 성질을 변화시킨 후 두 물질을 용이하고 경제적으로 분리할 수 있었다. NaOH 용액이 PVC/PET 표면성질의 변화에 미치는 영향을 관찰하였으며 두 물질의 분리시 NaOH 농도, 조건부여 온도 및 시간, 부선용액의 pH 및 온도, PVC의 조성비 등이 분리도에 미치는 영향을 조사하여 최적의 조건을 얻었다. NaOH 용액으로 조건부여하고 소수성인 PET표면을 친수성으로 개질한 후 부선법을 이용하여 두 물질을 약 95∼100%까지 분리하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권6호
• /
• pp.227-235
• /
• 2006

In this paper, autonomous separation methodology of faulted section based on network is proposed newly, which can minimize the outage effect as compared with the existing center-based faulted section separation method by determining and separating autonomously the faulted section by the free operation information exchange among IEDs on the feeder of distribution system. The all IEDs is designed in network in which client/server function is possible in order to separate autonomously the faulted section using PtP(Peer to Peer) communication. Also, Inference based solution of IED for the autonomous faulted section separation is designed by rules obtained from the analyzing results of distribution system topology. Here, the switch IEDs transmit on network the fault information utilizing on multi-casting communication method, at the fame time, determine selfly whether they operates or not by inferencing autonomously the faulted section using the inference-based solution after receiving the transmitted information. Finally, in order to verify the effectiveness and application possibility of the proposed methodology, the diversity fault cases are simulated for the typical distribution system.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.59-72
• /
• 1997

A numerical model is constructed to simulate the interactions of oblique shock wave / turbulent boundary layer on a strongly heated wall. The heated wall temperature is two times higher than the adiabatic wall temperature and the shock wave is strong enough to induce boundary layer separation. The numerical diffusion in the finite volume method is reduced by the use of a higher order convection scheme(UMIST scheme) which is a TVD version of QUICK scheme. The turbulence model is Chen-Kim two time scale model. The comparison of the wall pressure distribution with the experimental data ensures the validity of this numerical model. The effect of strong wall heating enlarges the separation region upstream and downstream. In order to eliminate the separation, wall suction is applied at the shock foot position. The bleeding slot width is about same as the upstream boundary layer thickness and suction mass flow is 10% of the flow rate in the upstream boundary layer. The final configuration of the shock reflection pattern and the wall pressure distribution approach to the non-viscous value when wall suction is applied.