• 한국광학회지
• /
• 제16권5호
• /
• pp.446-449
• /
• 2005

방향성 결합기의 각종 설계 구조변경에 대해 소멸비 특성의 변화를 직관적으로 예측하기 쉽지 않으므로 각 구조마다 매번 번거로운 특성 계산의 반복 작업이 수행되었다. 본 논문에서는 방향성 결합기의 설계구조 변수의 조절에 따른 소멸비 특성 변화를 체계적으로 계산하였고, 이 특성변화의 일반적인 경향을 파악하였다. 즉, 도파로 간격을 입력 도파로의 폭으로 규격화하면 이 변화 경향을 일반화하는 특성곡선을 얻을 수 있는 것으로 파악되었다. 이때, 정규화주파수 v와 도파간격비율 d가 큰 구조일수록 소멸비를 높일 수 있었고, d를 동일하게 유지한 여러 경우의 구조에 대해서는 v의 변화에 따른 소멸비 특성곡선이 일치하는 것을 보였다. 이러한 소멸비 특성의 일반화 경향은 높은 소멸비 특성을 유지하면서도 소자를 작게 설계하거나 파장분리기의 설계에 유용하게 활용될 수 있으므로 1310/1550 nm 파장 분리기의 설계와 제작에 적용하여 그 효용성을 확인하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권1호
• /
• pp.76-83
• /
• 2010

본 연구는 정렬배열 및 엇갈림배열 상태에 놓인 원주군 주위의 유동장 특성을 와법으로 수치계산한 것이다. 계산은 피치 비 Pt/D=1.25~2.0, 레이놀즈 수 Re=$4.0{\times}10^1{\sim}4.0{\times}10^4$의 범위 내에서 각 유동장의 순간 볼텍스 분포, 순간 속도분포를 계산하였다. 정렬배열 및 엇갈림 배열 모두 각 원주의 상방에서는 시계방향의, 하방에서는 반시계방향의 볼텍스가 발생하였다. 각 배열 모두 원주군 후방에서 역류의 발생여부는 피치 비와 레이놀즈 수에 기인하며, 같은 레이놀즈 수에서는 피치 비가 작을수록, 그리고 같은 피치 비에서는 레이놀즈 수가 클수록 원주군 후방에서 역류발생이 쉽게 일어났다. 그리고 그 경계영역은 정렬배열의 경우 피치 비 Pt/D=1.5, 레이놀즈 수 Re=400~4,000, 엇갈림 배열의 경우 피치 비 Pt/D=1.4, 레이놀즈 수 Re=40~400에 존재했다.

• 인터넷정보학회논문지
• /
• 제16권6호
• /
• pp.1-9
• /
• 2015

본 논문에서는 이기종 네트워크를 구성하는 대표 무선접속 기술인 WiMAX, CDMA, 무선랜 간의 주파수 공유 분석을 수행하였다. 3가지 접속기술은 각기 다른 주파수 대역을 사용하지만 대역외 방사특성으로 인해 타 무선접속 기술에 간섭을 일으킬 수 있다. 따라서 간섭 허용기준을 만족하기 위한 최소 인접채널 간섭률을 산출하고 이를 바탕으로 간섭/피간섭 시스템간의 최소 주파수 이격(보호대역)을 산출하였다. 분석 결과 WiMAX와 무선랜 간에는 적어도 20 MHz의 보호대역, WiMAX와 CDMA시스템 간에는 적어도 15 MHz의 보호대역이 필요함을 확인하였다.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.551-559
• /
• 2013

To investigate the adhesion effect of sodium bisulfite content in making blocked isocyanate, wood adhesive PB-1, PB-2, PB-3 and PB-4 containing sodium bisulfite content of 15%, 22.5%, 30% and 37.5% were synthesized respectively. As a result, when the amount of sodium bisulfite increased in adhesives, the tensile strength was found to be proportionally increased. The final adhesive mixtures were manufactured using a two-components system which are prepared by mixing two separate protein and BI solutions due to the precipitate in the adhesives. As PVA was added to adhesives to increase tenacity, the plywood dehiscence phenomenon after cold pressing process was declined. By addition of PVA, the tensile strength was improved up to $6.5{\sim}7kgf/cm^2$ with BI/protein ratio from 1:6 up to 1:8. Phase separation between milk fat and aqueous layer was disappeared after addition of emulsifier, Tween 20. Additon of Tween 20 showed tensile strength up to $5{\sim}6.5 kgf/cm^2$ at NCO/protein ratio of 1:12 ~ 1:14 without phase separation.

• 대한방사선치료학회지
• /
• 제1권1호
• /
• pp.47-51
• /
• 1985

Authors describe some useful data when constructing tissue-equivalent compensators which would compensate tissue deficit in the treatment field of high energy electromagnetic radiation Tissue equivalent compensator is made of lucite. The ratio of compensator thickness to the thickness of tissue deficit depends on radiation energy, field size and the distance from the compensator to patient skin. When the compensator is separated from skin surface, the thickness ratio is always smaller than 1.0. This means that the larger the separation, the contribution to the total dose by means of scattered radiation from a tissue equivalent compensator is smaller. Authors propose that the thickness of lucite as tissue equivalent compensator is 0.57 times tissue deficit and the separation between compensator and skin is at least 15m for Co-60 gamma ray and 25cm for 10MV X-ray.

• 항공우주시스템공학회지
• /
• 제7권3호
• /
• pp.1-6
• /
• 2013

Numerical optimization of two dimensional high lift configuration was performed with flow solver and optimization method based on RSM(Response Surface Model). Navier-Stokes solver with Spalart-Allmaras turbulence model was selected for the simulation of highly complex and separated flows on the flap. For the simultaneous optimization of both flap shape and setting (gap/overlap), 10 design variables (eight variables for flap shape variation and two variables for flap setting) were chosen. In order to generate the response surface model, 128 experimental points were selected for 10 design variables. The objective function considering maximum lift coefficient, lift to drag ratio and lift coefficient at specific angle of attack was selected to reduce flow separation on the flap surface. The present method was applied to two dimensional fowler flap in landing configuration. After applying the present method, it was shown that the optimized high lift configuration had less flow separation on the flap surface and lift to drag ratio was suppressed over entire angle of attack range.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.778-784
• /
• 2001

Injection molding is a very important industrial process for the manufacturing of plastics objects. During an injection molding process of composites, the fiber-matrix separation and fiber orientation are caused by the flow of molten polymer/fiber mixture. As a result, the product tends to be nonhomogeneous and anisotropic. Hence, it is very important to clarify the relations between separation orientation and injection molding conditions. So far, there is no research on the measurement of fiber orientation using image processing. In this study, the effects of fiber content ratio and molding condition on the fiber orientation-angle distributions are studied experimentally. Using the image processing method, the fiber orientation distribution of weld-line parts in injection-molded products is assessed. And the effects of fiber content and injection molding conditions on the fiber orientation functions are also discussed.

• 한국식생활문화학회지
• /
• 제12권3호
• /
• pp.265-274
• /
• 1997

This study was conducted in ordor to find the most suitable conditions for producing the Doenjang with optimal odor compound contents. Three sample groups with the different preparing methods -Doenjang that has not gone through the soy sauce separation process (Doenjang A), Doenjang that has gone through the soy sauce separation process; Meju-20% salt water ratio of 1 : 4 (Doenjang B), and that with the ratio of 1.3 : 4 (Doenjang C)- were tested during different ripening periods. Odor compound contents were analyzed through Solvent Extraction Method and Simultaneous Steam Distillation Extraction (SDE). The number of odor compounds was greatest in Doenjang A and during the mid to late stage in each groups. In the sensory evaluation of Doenjang odors, Doenjang A received the highest scores in the categories of overall preferences, while Doenjang C got the lowest scores. Individual odor didn't vary significantly during ripening periods, but the overall odor and taste preference was highest in the samples ripened for 75 to 120 days. Stepwise multiple regression analysis of major odor compounds of Doenjang revealed that benzeneacetaldehyde is the major explanatory variable for offensive odor. Benzeneethanol, 3-methylthio-propanal and 4-methyl-phenol are the explanatory variables for salty odor, nutty odor and rancid odor, respectively. Odor compounds that contribute to the overall odor preference varied from the compounds that affect the taste preference.

• Journal of Pharmaceutical Investigation
• /
• 제22권1호
• /
• pp.33-40
• /
• 1992

This study was aimed to control the release characteristics of ketoprofen by microencapsulating $ketoprofen-{\beta}-cyclodextrin\;(KF-{\beta}-CyD)$ solid dispersion with Eudragit RS by the phase separation method using a nonaqueous vehicle. KF alone was also microencapsulated with Eudragit RS by the evaporation process in water phase. The results obtained showed that it was not possible to microencapsulate KF alone by phase separation in a chloroform-cyclohexane system while it was easy to microencapsulate $(KF-{\beta}-CyD)$ solid dispersion system. For the microcapsules, the release test was performed in the first fluid (pH 1.2) and the second fluid (pH 6.8) of K.P.V disintegration medium at $37^{\circ}C$. The release of KF from $(KF-{\beta}-CyD)$ solid dispersion microcapsules (1:1 core wall ratio) was more sustained than that from KF microcapsules, and followed zero-order kinetics. Especially, solid dispersion microcapsules showed pH-independent release patterns with higher wall to core ratio (1:1 w/w).

• 한국가축번식학회지
• /
• 제3권1호
• /
• pp.56-60
• /
• 1979

This study was carried out to find the difference between the naturaly born sex rtio among 1,242 head of pigs(120 litters) at Swine Farm, Cheil Sugar Co. and B-body a, pp.arance from their semen, and to find the conception rates which were inseminated to 40 sows with sperm from the anode and cathode after electrophoresis of boar semen. In order to the electrophoretic separation, the semen was placed into the platimum loop electrodes(105 cc) at room temperature for 30 minutes with D.C. 3V. and 350${\mu}$A. constant. The sperm fluorescent staining method was performed in accordance with Bhattacharya's(1970) method. The spermatozoa were observed through a Olympus Vanox microscope(made in Japan) using exciter filter with I heat barrier HPO 120. The results obtained were summarized as follows: 1. The natural sex ratio of 1,242 piglets(120 litters) which were born at Swine Farm, Cheil Sugar Co. was 50%, and B-body a, pp.arance of its boar semen were 49.24%. 2. With electrophoretic separation, the anode and cathode attracted 65.5${\pm}$5.03% and 29.89${\pm}$4.29% of B-body bearing sperm, respectively. 3. After electrophoresis of boar sperm, they were inseminated to 40 sows with sperm from anode and cathode. The conception rate was 92.5%.