• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.1053-1054
• /
• 2013

과거 건설사업관리업무를 수행하는 건설사 업무담당자들은 방대한 보고자료를 발주기관으로 전송할 경우 주로 웹하드를 이용하였다. 그러나, 최근 개인정보 유출 등 각종 인터넷 보안사고가 빈번히 발생함에 따라 발주기관별로 기관 내부망과 외부망으로 분리하여 네트워크 보안을 강화하는 추세에 있다. 이에 따라, 건설사에서 발주기관으로 대용량 파일을 전송하지 못함으로서 발주청의 건설사업관리 업무처리에 어려움이 발생하였다. 이러한 문제를 해결하기 위하여 본 연구는 망분리 환경하에서 특정 사용자만을 위한 자료 공유체계를 마련하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.267-281
• /
• 2015

The ground movement and changes in earth pressure due to the consecutive construction of retaining wall and underground space were studied experimentally. A soil tank having 160 cm in length and 120 cm in height, was manufactured to simulate the vertical excavation like retaining wall by using 10 separated right side walls and underground space excavation like tunnel by using 5 separated bottom walls. The variation of earth pressure and surface settlement were measured according to the excavation stages. The results showed that the decrease of earth pressure due to the wall movement can cause the increase of earth pressure of the neighboring walls proving the arching effect. Experiments simulating continuous construction sequence also identified arching effect, however only 50% of earth pressure was restored on the 10th right side wall due to the movement of 1st bottom side wall unusually.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.8
• /
• pp.526-533
• /
• 2008

In this study, theoretical super screen vibration analysis has been carried out to predict the dynamic characteristics of interactive waste particles. In order to approach these problems, it is necessary to have a fundamental understanding the screening process and the process of both the remaining and the passed material on a screen with several interacting screen planes based on Soldinger(1999) was discussed. Here, the vibrating screen is composed of three assemblies such as screen, wastes guide, and supported screen as shown in Fig. 1. This model is regarded vibrator as the system of screen fixed tilt plates. Then materials(or particles) of different size is to be separated by using the eccentric vibrator and classifying tilt plates. As well moisturized construction wastes is more efficient to separate than moisture-less it. In processing separate mechanism, the more materials is light, the more staying time is long. Thus much lighter construction wastes(wood, Styrofoam, etc) and heavier materials are separated by staying time delay in a super screen. The design results, separation screen were able to know that small and larger particles are conspicuous difference each motion character according to trajectory particles, and small particles raise the probability in classifying tilt plates.

• Korean Journal of Construction Engineering and Management
• /
• v.17 no.6
• /
• pp.3-12
• /
• 2016

The purpose of this study is to provide a domestic applicable modular building construction process by benchmarking international best practices. In this study, we derive the risk factors that may occur in performing a modular construction projects and the modular construction management factors through case analysis. In order to effectively respond to risks in performing a modular building projects, we propose the modular building construction process which is separated by a transportation, lifting, assembly steps based on the unit module construction sequence. It is the key to providing management information and guidelines for the design, production, construction participants by reflecting the information for each step in the process. This study would prevent a potential hazard which may occur in the construction process. Consequently, It could result in saving the entire cost of modular construction project as shortening the project schedule and could improve workability of modular construction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.4
• /
• pp.323-330
• /
• 2007

Recently, due to the effective land utilization and environmental protection, the construction of 2-arch tunnel has been gradually increased. In spite of this tendency, the mechanical information for the 2-arch tunnel, especially such as its behavior characteristics and mechanism are not enough. Therefore in this study, the theoretical and numerical studies on the behavior characteristics of 2-arch tunnel are carried out and longitudinal optimum separated distance of tunnel face is proposed by considering the analysis results from the behavior of advanced excavation of tunnel and stress of central pillar. As a result, longitudinal optimum separated distance of tunnel face is in 0.5D for the better safety of 2-arch tunnel by rapidly decreasing the stress concentration of central pillar.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.5
• /
• pp.788-799
• /
• 2008

Since the late 20C, a lot of fashion designers have considered about new construction system in fashion. Many arguments about architectural form and construction system have being supported on enlargement of range of functionalism fashion through the consideration about new shape and combination among various any other spheres. Modular concept, which is able to divide complex construction of integration into separated basic unit and use various and liberal arrangements, is regarded alternative idea of economic construction that creates new shape and constructive beauty through the simple operation and changing combination continuously. Specially, fashion designs of Yoehlee Teng, John Ribber, and Galya Rosenfeld are estimated that they are effectively utilized architectural modular system pursuing multi-function and multi-change in fashion. Modular system utilized in fashion construction will be classified as follows: 1) layering system of Yoehlee Teng, 2) combine system of john Ribber, and 3) lego system of Galya Rosenfeld. This thesis will presents beneficial guide for simple and practical functionalism fashion design development in 21C.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.6 s.28
• /
• pp.107-114
• /
• 2005

The time and cost is the most important information for the construction project management. Currently, a lot of studies have been done in order to clearly relate them with each other, but there have been some difficulties. Because of the characteristic of Korean government contract law, the construction project in Korea is managed by only cost and the time and cost information is distinctly separated. In order to manage all the major construction project information smoothly, the time and cost information should have relation with each other. This study suggest methods for relating the time and cost information, especially for road construction project of MOCT. Through the survey of construction field engineers and case study of the road construction project, several alternatives to improve the usability of construction information are suggested in this study. These alternatives can support relating other construction information.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.173-175
• /
• 2012

Temperature during concrete curing can be effectively used to predict the early age strength of concrete However, various current methods have limits to provide the temperature data in real time due to harsh working environment including frequent cutting of wires. This paper presents the results of our investigation of an all-in-one Wireless sensor network (WSN) for the management of the curing temperature of in-placed concrete at early curing stages. Also, the network device for transmission can be easily separated from the probe sensor part and reused consistently. The field experiment entailed measuring the curing temperature of concrete using the WSN. After fresh concrete was poured into the formworks, the signals were measured at a 150 m radius from the field office. The signal was acquired for 28 days without any dispersion or interruption at the construction site; therefore, this study confirms the applicability of the proposed system to a construction site.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.531-534
• /
• 2007

In the current domestic design-build contract, design and construction are separated due to prohibition of outside work. but instead the design-build contract adopts a method of fulfilling each assignment as a joint venture, which makes it difficult for participants to communicate each other and often require changes of design. also, It is difficult to performance efficiency project that they don't want to share useful information related to design and construction. In this study suggests how to maxmize the effiency of the project by proposing a process model connected with an efficient partnering and constructability in a deign development phase of design-build constract.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.515-518
• /
• 2006

It is explicitly shown that a supersymmetry structure exists in the spectrum of a rigid symmetric top rotor in the molecule-fixed frame. Using projection operators constructed from the time-reversal symmetry of the rotor, the full rotor Hamiltonian is separated into two parts, i.e., the bosonic and fermionic components. The construction, without ambiguity, suggests that the rotor has a supersymmetry in it. This supersymmetry is mathematically equivalent to that of the free rotor on a plane recently noted by Rau.