• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.55-57
• /
• 2014

본 논문에서는 자동차 번호판 인식을 위해 직선검출법, 모폴로지에 의한 검출법을 사용하지 않고, Blob 레이블링 기법을 이용한 번호판 인식 기법을 제안한다. 고성능 컴퓨팅 시스템의 성능 향상을 위한 효율적인 동적 작업부하 균등화 정책을 제안한다. ITS분야에서 가장 중요한 요소라 할 수 있는 자동차 번호판 인식은 자동화된 차량 관리 시스템 구성에 필수적인 요소로 요구된다. 또한, 자동차와 관련된 정보는 직, 간접적으로 높은 중요도를 가지고 있으며, 자동차와 관련된 정보가 이용되는 영역은 교통관리, 교통량분석, 자동 요금 징수 시스템, 자동차 위법 단속 등 응용범위가 나날이 넓어지고 있다. 본 논문에서는 자동차 번호판 인식을 위해 Blob 레이블링 기법을 이용하였으며, 번호판 인식을 위한 영상 샘플은 오츠알고리즘을 이용하여 이진화된 영상을 사용하였다.

• Molecules and Cells
• /
• v.39 no.6
• /
• pp.460-467
• /
• 2016

Bacteriophytochromes are phytochrome-like light-sensing photoreceptors that use biliverdin as a chromophore. To study the biochemical properties of the Deinococcus radiodurans bacteriophytochrome (DrBphP) protein, two anti-DrBphP mouse monoclonal antibodies (2B8 and 3H7) were generated. Their specific epitopes were identified in our previous report. We present here fine epitope mapping of these two antibodies by using truncation and substitution of original epitope sequences in order to identify minimized epitope peptides. The previously reported original epitope sequences for 2B8 and 3H7 were truncated from both sides. Our analysis showed that the minimal peptide sequence lengths for 2B8 and 3H7 antibodies were nine amino acids (RDPLPFFPP) and six amino acids (PGEIEE), respectively. We further characterized these peptides in order to investigate their reactivity after single deletion and single substitution of the original peptides. We found that single-substituted 2B8 epitope (RDPLPAFPP) and dual-substituted 3H7 epitope (PGEIAD) showed significantly increased reactivity. These two antibodies with high reactivity for the short modified peptide sequences are valueble for developing new peptide tags for protein research.

• Journal of Sensor Science and Technology
• /
• v.29 no.6
• /
• pp.394-398
• /
• 2020

In this paper, we report the sensing performance of H₂ gas sensors composed of Pd/carbon nanotube (CNT) buckypaper at room temperature. The CNT buckypaper was made using a simple filtration process and subsequently deposited with Pd as the sensing material. The sensitivity of the sensor increased with respect to the gas concentration. To investigate the effect of Pd thickness, Pd layers of different thickness were deposited on the buckypaper, and the response of the sensor was evaluated. The proposed sensor exhibits excellent sensing properties with optimized Pd thickness at room temperature (25℃). Pd nanoparticles significantly impact the sensitivity and selectivity of the sensor because of the spillover effect. In addition, the sensor is highly suitable for bendable and wearable devices owing to its structural flexibility.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1447-1453
• /
• 2014

This paper proposes the new method based on the availability of three points measurement and convexity of photovoltaic (PV) curve characteristic at the maximum power point (MPP). In general, the MPP tracking (MPPT) function is the important part of all PV systems due to their power-voltage (P-V) characteristics related with weather conditions. Then, the analog-to-digital converter (ADC) and low pass filter (LPF) are required to measure the voltage and current for MPPT by the digital controller, which is used to implement the PV power conditioning system (PCS). The measurement and quantization error due to rounding or truncation in ADC and the delay of LPF might degrade the reliability of MPPT. To overcome this limitation, the proposed method is proposed while improving the performances in both steady-state and dynamic responses based on the detailed investigation of its properties for availability and convexity. The performances of proposed method are evaluated with the several case studies by the PSCAD/EMTDC$^{(R)}$ simulation. Then, the experimental results are given to verify its feasibility in real-time.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.3
• /
• pp.190-195
• /
• 2005

Objective : This study is performed to evaluate the procedural complications, aneurysm occlusion rate, and mid-term outcome of endovascular treatments in intracranial aneurysms. Methods : We retrospectively investigated 135 patients with 161 cerebral aneurysms who were treated by endovascular means at our institute from March 1999 to December 2004. We statistically analyzed overall outcome, occlusion rate, and occurrence of complications according to the location, size, rupture history, and neck size of aneurysms. Results : Forty-nine patients [36.3%] had experienced acute intracranial or extracranial complications related to the procedure. Among these, there were 13cases of perforation of the aneurysm, 9 of local vasospasm, 8 of thromboembolism, 4 of coil migration, 3 of occlusion of parent vessels due to coil protrusion, and 1 of seizure. Extracranial complications occurred in 14cases including alopecia [9cases], femoral artery thrombosis [2cases], acute renal failure [2cases], and hypovolemic shock [1case]. One hundred twenty-six aneurysms [78.3%] had complete occlusion of the aneurysm and 35 [21.7%] incomplete occlusion at 6months angiographic follow-up. Postembolization clinical follow-up ranged from 1 to 60months [mean, 14.2months]. Seven of the 161 aneurysms underwent additional embolization and 2 incomplete embolized aneurysms required subsequent surgery. Conclusion : The procedural complications and incomplete occlusion rates are substantial. Therefore, endovascular treatment needs close and continued neurosurgical and neuroradiological concerns for the therapy of intracranial aneurysms.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.11
• /
• pp.874-880
• /
• 2006

The power density and heat dissipation rate per unit area of the telecommunication equipment have been increased with the technology development in the footprint of telecommunication hardware. A proper heat dissipation method from the PCB module is very important to allow reliable operation of its electronic component. In this study, a hybrid air-conditioner for the telecommunication equipment room was designed to save energy and obtain system reliability. For high outdoor temperatures, the hybrid system operates in the vapor compression cycle, while, for low outdoor temperatures, the hybrid system works in the secondary fluid cooling cycle with no operation of the compressor. The performance of the hybrid air-conditioner was measured by varying outdoor and indoor temperatures. The hybrid air-conditioner yielded 50% energy saving compared with the conventional refrigeration system when the mode switch temperature was $8.3^{\circ}C$.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.3
• /
• pp.87-92
• /
• 2017

Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer networked nanoparticles were prepared to synthesize hard coating solution by reaction with isophorone diisocyanate(IPDI) of 1, 2, 3, 4 phr. The structures and molecular weights of the synthesized solutions were characterized by IR spectroscopy and gel permeation chromatography, respectively. In the cross-cut test for the adhesion, all the solutions showed good adhesion of 5B regardless of the content of IPDI and film thickness. The addition of 1 phr IPDI resulted in the best pencil hardness. The IPDI combined siloxane hard coating solution showed more flexibility than the siloxane solution. These results will yield the improvement in the siloxane solution using for plastic display plate.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.406-410
• /
• 2011

ZnO nanorods were prepared by the electrodeposition route on conductive Au/Si substrates. The effects of deposition time on the microstructural evolution and optical properties of ZnO nanorods were investigated. With increasing deposition time from 1 h to 20 h, the diameter and length of the ZnO nanorods increased gradually to about 328 nm and 6.55${\mu}m$, respectively. The ZnO nanorods were dense and vertically well-aligned. The photoluminescence (PL) peaks corresponding to the near band edge of ZnO were observed. With increasing deposition time, the intensity of PL peaks increased with nanorod growth up to 4 h and then decreased. This might be due to the degradation of crystal quality caused by merging of nanorods.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.34-40
• /
• 2022

In this paper, a flow analysis of a swash-plate type hydraulic piston pump installed on a hydraulic flow supply system for marine vessels is presented. A model and governing equations for computational fluid dynamics (CFD) analyses of swash-plate type hydraulic piston pumps were built, and simulation results regarding the internal flow field of the pump were obtained. By analyzing the internal flow of the swash-plate type hydraulic piston pump, we can confirm the time-dependent stroke of each piston as the pump rotates. We also verified that by analyzing the pulsating flow against the slope of the swash plate, the simulation results match well with the experimental results. The natural frequency of the system was computed to be approximately 380 Hz by applying and analyzing the fast Fourier transform (FFT) of each swash plate slope evaluated.

• Journal of Navigation and Port Research
• /
• v.44 no.5
• /
• pp.382-391
• /
• 2020

In line with the trend of global transport volume which has increased rapidly over the years, internal transportation in seaports is always conducted with high frequency. Thus, there is always much potential for traffic jams as well as high transportation costs and emissions. Many efforts have been initiated to streamline the inter-terminal container transport (ITT) through the development of automated vehicles and equipment as well as using private transport facilities to overcome these limitations. The purpose of this paper to develop a framework to design, analyze, and validate the efficiency of a new ITT system in a port area based on the monorail network and automatic vehicles. First, the number of shuttles and loaders was determined depending on the transport demand scenario. Next, a simulation model was applied to evaluate the system performance as well as gain more insight into the working process of the ITT system. Finally, by setting goals for the performance indicators, the results showed that the system was highly efficient with 100% of the containers delivered to their destination on time. Besides, a series of other performance tracking was provided to provide insight into the system's capabilities.