• Journal of Sensor Science and Technology
• /
• v.16 no.4
• /
• pp.247-253
• /
• 2007

Low power consumption sensor network platform (sensor node) for sensor networking with IEEE 802.15.4 protocol was fabricated. The sensor node used ceramic bar type antenna for increasing RF signal performance and decreasing PCB size occupied by antenna. The communication range of the fabricated sensor node was about $20{\sim}30$ m in open environment with 915 MHz frequency bandwidth and well supported by Tiny OS. The sensor node have good connectivity with various external devices by RS-232, I2C, analogue and digital expansion board, hence, this sensor node can be applied to various applications in wireless sensor network and ubiquitous sensor network.

• Journal of Sensor Science and Technology
• /
• v.21 no.6
• /
• pp.402-407
• /
• 2012

We report a Fabry-Perot interferometer (FPI)-based multi-channel micro-spectrometer used for multi-gas measurement in the spectral range of $3-5{\mu}m$ and its gas sensing performance. The fabricated infrared (IR) spectrometer consists of two parts: an FPI on the top side for selective IR filtering and a $V_2O_5$-based IR detector array on the bottom side for the detection of the filtered IR. Experimental results show that the FPI-based multi-channel gas sensor has reliability and selectivity for simultaneously detecting environmentally harmful gases such as $CH_4$, $CO_2$, $N_2O$ and CO in the spectral range of $3-5{\mu}m$. The fabricated FPI-based multi-channel gas sensor also demonstrated that a reliable and selective detection of gas concentrations ranging from 0 to 500 ppm is feasible. In addition, the electrical characteristics demonstrate a superior response performance in regards to the selectivity in the multi-target gases.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2769-2792
• /
• 2013

In this paper, we propose an authenticated key agreement scheme, TinyIBAK, based on the identity-based cryptography and bilinear paring, for large scale sensor networks. We prove the security of our proposal in the random oracle model. According to the formal security validation using AVISPA, the proposed scheme is strongly secure against the passive and active attacks, such as replay, man-in-the middle and node compromise attacks, etc. We implemented our proposal for TinyOS-2.1, analyzed the memory occupation, and evaluated the time and energy performance on the MICAz motes using the Avrora toolkits. Moreover, we deployed our proposal within the TOSSIM simulation framework, and investigated the effect of node density on the performance of our scheme. Experimental results indicate that our proposal consumes an acceptable amount of resources, and is feasible for infrequent key distribution and rekeying in large scale sensor networks. Compared with other ID-based key agreement approaches, TinyIBAK is much more efficient or comparable in performance but provides rekeying. Compared with the traditional key pre-distribution schemes, TinyIBAK achieves significant improvements in terms of security strength, key connectivity, scalability, communication and storage overhead, and enables efficient secure rekeying.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.87-93
• /
• 2016

In this paper, we propose a RF energy harvesting based routing protocol in mobile ad-hoc wireless sensor networks. The main features and contributions of the proposed routing protocol are as follows. First, establishment of routing route based on both remaining energy of mobile sensor nodes and RF energy harvesting. Second, establishment of routing route by considering availability and stability of route based on energy of mobile sensor nodes to increase lifetime of networks and route. The performance evaluation of the proposed routing protocol using OPNET shows that the routing method considering both route availability and route stability based on RF energy harvesting can increase efficiently route lifetime.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.103-108
• /
• 2015

Maintaining efficient energy consumption and elongating network lifetime are the key issues in wireless sensor networks. Existing routing protocols usually select the cluster heads based on the proximity to the sensor nodes. In this case the cluster heads can be placed farther to the base station, than the distance between the sensor nodes and the base station, which yields inefficient energy consumption. In this work we propose a novel algorithm that select the nodes in a cluster and the cluster heads based on the locations of related nodes. We verify that the proposed algorithm gives better performance in terms of network life time than existing solutions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.97-104
• /
• 2005

Vision-based lane sensing systems require accurate and robust sensing performance in lane detection. Besides, there exists trade-off between the computational burden and processor cost, which should be considered for implementing the systems in passenger cars. In this paper, a stereo vision-based lane detection system is developed with considering sensor configuration aspects. An inverse perspective mapping method is formulated based on the relative correspondence between the left and right cameras so that the 3-dimensional road geometry can be reconstructed in a robust manner. A new monitoring model for estimating the road geometry parameters is constructed to reduce the number of the measured signals. The selection of the sensor configuration and specifications is investigated by utilizing the characteristics of standard highways. Based on the sensor configurations, it is shown that appropriate sensing region on the camera image coordinate can be determined. The proposed system is implemented on a passenger car and verified experimentally.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.1
• /
• pp.123-144
• /
• 2014

Wireless sensor networks are generally deployed for specific applications to accomplish certain objectives over a period of time. To fulfill these objectives, it is crucial that the sensor network continues to function for a long time, even if some of its nodes become faulty. Energy efficiency and fault tolerance are undoubtedly the most crucial requirements for the design of an information extraction protocol for any sensor network application. However, most existing software agent based information extraction protocols are incapable of satisfying these requirements because of static agent itineraries and large agent sizes. This paper proposes an Information Extraction protocol based on Multiple software Agents with Dynamic Itineraries (IEMADI), where multiple software agents are dispatched in parallel to perform tasks based on the query assigned to them. IEMADI decides the itinerary for an agent dynamically at each hop using local information. Through mathematical analysis and simulation, we compare the performance of IEMADI with a well known static itinerary based protocol with respect to energy consumption and response time. The results show that IEMADI provides better performance than the static itinerary based protocols.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.10
• /
• pp.3793-3814
• /
• 2021

Most secure solutions like cryptography are software based and they are designed to mainly deal with the outside attacks for traditional networks, but such soft security is hard to be implemented in wireless sensor networks to counter the inside attacks from internal malicious nodes. To address this issue, reputation has been introduced to tackle the inside malicious nodes. Reputation is essentially a stimulating mechanism for nodes' cooperation and is employed to detect node misbehaviors and improve the trust-worthiness between individual nodes. Among the reputation models, binomial distribution based reputation has many advantages such as light weight and ease of implementation in resource-constraint sensor nodes, and accordingly researchers have proposed many insightful related methods. However, some of them either directly use the modelling results, apply the models through simple modifications, or only use the required components while ignoring the others as an integral part of the whole model, this topic still lacks a comprehensive and systematical review. Thus the motivation of this study is to provide a thorough survey concerning each detailed functional components of binomial distribution based reputation for wireless sensor networks. In addition, based on the survey results, we also argue some open research problems and suggest the directions that are worth future efforts. We believe that this study is helpful to better understanding the reputation modeling mechanism and its components for wireless sensor networks, and can further attract more related future studies.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.176-184
• /
• 2011

As modern megalopolises become more complex and huge, convenience and safety of citizens are main components for a welfare state. In order to make safe society, telemetrics technology, which remotely measures the information of target system using electronic devices, is an essential component. In general, telemetrics technology consists of USN (ubiquitous sensor network) based on a wireless network, smart sensor, and SoC (system on chip). In the smart sensor technology, the following two problems should be overcome. Firstly, because it is very difficult for transducer manufacturers to develop smart sensors that support all the existing network protocols, the smart sensor must be independent of the type of networking protocols. Secondly, smart sensors should be modular so that a faulty sensor element can be replaced without replacing healthy communication element. To solve these problems, this paper investigates the feasibility of an IEEE 1451 based ZigBee smart sensor system. More specifically, a smart sensor for large network coverage has been developed using ZigBee for active telemetrics.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.331-336
• /
• 2007

In this study, we have fabricated an infrared optical fiber based sensor which can monitor the respiration of a patient. The design of a chalcogenide optical fiber based sensor is suitable for insertion into a high electro-magnetic field environment because the sensor consists of low cost and compact mid-infrared components such as an infrared light source, a chalcogenide optical fiber and a thermopile sensor. A fiber-optic respiration sensor is capable of detecting carbon dioxide ($CO_{2}$) in exhalation of a patient using the infrared absorption characteristics of carbon gases. The modulated infrared radiation due to the presence of carbon dioxide is guided to the thermopile sensor via a chalcogenide receiving fiber. It is expected that a mid-infrared fiber-optic respiration sensor which can be developed based on the results of this study would be highly suitable for respiration measurements of a patient during the procedure of an MRI.