• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회논문집(I)
• /
• pp.205-210
• /
• 2000

An optimum design algorithm of PSC box girder bridges using design sensitivity analysis is proposed in this paper. For the efficiency of the proposed algorithm, approximated reanalysis techniques using design sensitivity analysis are introduced. And also to save the numerical efforts, an efficient reanalysis technique through approximated structural responses is proposed. A design sensitivity analysis of structural response is executed by automatic differentiation(AD). The efficiency and robustness of the proposed algorithm, compared with conventional algorithm, is successfully demonstrated in the numerical example.

• 동력기계공학회지
• /
• 제5권4호
• /
• pp.82-89
• /
• 2001

To design a structural or a mechanical system with the best performance, the main procedure of a typical design usually consists of repeated modifications of design parameters and the investigation of the system response for each set of these parameters. But this procedure requires much time, effort and experience. Sensitivity analysis can provide systematic information for improving performance of a system. The author has studied on the development of the structural analysis algorithm and suggested recently the transfer stiffness coefficient method(TSCM). This method is very suitable algorithm to a personal computer because the concept of the TSCM is based on the transfer of the nodal stiffness coefficients which are related to force and displacement vectors at each node. In this paper, a new sensitivity analysis algorithm using the concept of the TSCM is formulated for the computation of state variable sensitivity in static problems. The trust of the proposed algorithm is confirmed through the comparison with the computation results using existent sensitivity analysis algorithm and reanalysis for computation models.

• 대한조선학회논문집
• /
• 제43권2호
• /
• pp.156-163
• /
• 2006

The accuracy of estimates of hydrodynamic coefficients can be increased by using sensitivity-maximizing inputs. In this study, sensitivity-maximizing actuator commands of a submersible, which are sequences of bang-bang type commands, were obtained using Genetic Algorithm (GA) optimization technique. By comparing the total sensitivity values, deduced actuator inputs were found to be superior to the other sea trials. Based on the sensitivity distribution of conventional sea trials and sensitivity distribution results through deduced input scenario a review of submersibles' manoeuvring equations of motion was conducted .

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.286-290
• /
• 2007

In this paper, a new algorithm based on sensitivity method for alleviating overloads in power networks is presented to find the switching branches effectively. Preferentially the switching of shunt reactive devices such as shunt reactor and shunt capacitors is performed. If overloads are not eliminated, the ranking of switching branches is calculated according to the algorithm based on sensitivity method and the switching of the ranked branches is performed in the order of ranking until overloads are eliminated. In order to show the effects of this algorithm, it is applied to a small scale power system of IEEE 39-bus test system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.299-306
• /
• 1998

Design sensitivity analysis of a mechanical system is an essential tool for design optimization and trade-off studies. This paper presents an efficient algorithm for the design sensitivity analysis of railway vehicle systems, using the direct differentiation method. The cartesian coordinate is employed as the generalized coordinate. The governing equations of the design sensitivity analysis are formulated as the differential equations. Design sensitivity analysis of railway vehicle systems is performed to show the validity and efficiency of the proposed method.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1442-1445
• /
• 2005

Several test methods, including micro strain/deformation measurement techniques, have been studied to more reliably measure the micro properties in micro/nano materials. Therefore, in this study, the continuous measurement of in-plane tensile strain in micro-sized specimens of thin film materials was introduced using the micro-ESPI technique. TiN and Au thin films 1 and $0.47\;\mu{m}$ thick, respectively, were deposited on the silicon wafer and fabricated into the micro-sized tensile specimens using the electromachining process. The micro-tensile loading system and micro-ESPI system were developed to measure the tensile strain during micro-tensile test. The micro-tensile stress-strain for these materials was determined using the algorithm for continuous strain measurement. Furthermore, algorithm for enhancing the sensitivity to measurement of in-plane tensile strain was suggested. According to the algorithm for enhancement of sensitivity, micro-tensile strain data between interfringe were calculated. It is shown that the algorithm for enhancement of the sensitivity suggested in this study makes the sensitivity to the in-plane tensile strain increase.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1529-1539
• /
• 2000

A newly developed optimization method which uses the genetic algorithm combined with the sensitivity analysis is presented in this paper. The genetic algorithm is a probabilistic method, searching the optimum at several points simultaneously, requiring only the values of the object and constraint functions. It has therefore more chances to find global solution and can be applied various problems. Nevertheless, it has such shortcomings that even it approaches the optimum rapidly in the early stage, it slows down afterward and it can't consider the constraints explicitly. It is only because it can't search the local area near the current points. The traditional method, on the other hand, using sensitivity analysis is of great advantage in searching the near optimum. Thus the combination of the two techniques makes use of the individual advantages, that is, the superiority both in global searching by the genetic algorithm and in local searching by the sensitivity analysis. Application of the method to the several test functions verifies that the method suggested is very efficient and powerful to find the global solutions, and that the constraints can be considered properly.

• 소음진동
• /
• 제10권5호
• /
• pp.783-791
• /
• 2000

This describes a study on the support location optimizations of the beams using the genetic algorithm and the sensitivity analysis. The genetic algorithm is a probabilistic method searching the optimum at several points simultaneously and requiring only the values of the object and constraint functions. It has therefore more chances to find the global solution and can be applied to the various problems. Nevertheless, it has such a shortcoming that it takes too many calculations, because it is ineffective in local search. While the traditional method using sensitivity analysis is of great advantage in searching the near optimum. thus the combination of the two techniques will make use of the individual advantages, that is, the superiority in global searching form the genetic algorithm and that in local searching form the sensitivity analysis. In this thesis, for the practical applications, the analysis is conducted by FEB ; and as the shapes of structures are taken as the design variation, it requires re-meshing for every analysis. So if it is not properly controlled, the result of the analysis is affected and the optimized solution amy not be the real one. the method is efficiently applied to the problems which the traditional methods are not working properly.

• 동력기계공학회지
• /
• 제16권2호
• /
• pp.11-16
• /
• 2012

In this paper, the authors formulate the sensitivity analysis algorithm for the natural frequency of a torsional shafting by expanding the transfer stiffness coefficient method. The basic concept of the present algorithm is based on the transfer of sensitivity stiffness coefficient, which is the derivative of stiffness coefficient with respect to design parameter, at every node from the first node to the last node in analytical model. The effectiveness of the present algorithm is confirmed by comparing the results of the sensitivity analysis and those of the reanalysis for the natural frequencies of a torsional shafting with a constant cross section. In numerical calculation, the design parameter is the diameter of the shaft element of the torsional shafting.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권1호
• /
• pp.23-31
• /
• 2003

A novel 3D shape optimization algorithm is presented for electromagnetic devices carry-ing eddy current. The algorithm integrates the 3D finite element performance analysis and the steepest descent method with design sensitivity and mesh relocation method. For the design sensitivity formula, the adjoint variable vector is defined in complex form based on the 3D finite element method for eddy current problems. A new 3D mesh relocation method is also proposed using the deformation theory of the elastic body under stress to renew the mesh as the shape changes. The design sensitivity f3r the sur-face nodal points is also systematically converted into that for the design variables for the parameterized optimization application. The proposed algorithm is applied to the optimum design of the tank shield model of the transformer and the effectiveness is proved.