• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 춘계학술발표대회 및 제12회 신소재 심포지엄
• /
• pp.24.2-24.2
• /
• 2007

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2003년도 somma/kms meeting
• /
• pp.148-148
• /
• 2003

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.556-560
• /
• 2009

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. study on FM sideband injection locking has shown that when SLs are locked to the target sidebands of the directly modulated ML, the presence of the unselected sidebands influences the resulting microwave signals. The unselected signals can produce the unwanted beat signals around the desired beat signal, which degrade the overall system performance. This analysis way to generate Giga HZ signal generation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.203-203
• /
• 2009

Low temperature annealing for oxide TFTs including IGZO on PI substrate is the essential process to fabricate flexible display devices, since low heat-resistance on PI and PEN substrates limits the temperature range. Laser annealing is one of the promising candidates for low temperature process, and it has been used for various application in semiconductor and LCD fabrication. We irradiated laser to solution-based IGZO thin films on PI substrate were irradiated to laser beam, and investigated laser damage of PI layer. Based on transmittance analysis, wavelength(532nm) and scan speed(1000mm/s) is the optimized condition for laser irradiation about ink-Jet printed oxide TFTs on PI substrates.

• 한국입자에어로졸학회지
• /
• 제12권3호
• /
• pp.57-63
• /
• 2016

The laser-induced breakdown spectroscopy (LIBS) has been used for rapid detection of elemental compositions of various materials in multi-media (solid, liquid, gas, and aerosols). In this study, the aerosol-LIBS has been developed for real-time monitoring of process-induced particles produced during the semiconductor manufacturing. The developed aerosol-LIBS mainly consists of laser, optics, spectrometer, and aerosol chamber. A new aerosol chamber was constructed for the aerosol-LIBS to be applied for various semiconductor manufacturing process, including exhaust tubes, and low pressure and high temperature chamber. The aerosol-LIBS was evaluated by using laboratory generated aerosols for detection of various elements. As a result, P, Fe, Mg, Cu, Co, Ni, Ca, Na, and K emission lines were successfully detected by the aerosol-LIBS. Further evaluation of the aerosol-LIBS is being conducted.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.141-148
• /
• 2013

There are several problems in the conventional 2-D image processing and 3-D measurement systems. In the case of the 2-D image processing system, it is not possible to detect elevation data. In a 3-D measurement system, it requires a skillful operator and a lot of time for measuring data. Also, there exist data errors depending on operators. The limitation of detecting elevation data in the 2-D image processing system can be solved by laser diodes. In this study an algorithm that measures the accurate data in a subject face to be detected by combining laser diodes and a commercial CCD camera is developed. In the development process, a planar equation is developed using laser diodes and the equation is used to obtain a normal vector. Based on the results, an algorithm that transforms commercial CCD camera coordinates to 3-D coordinates is proposed. The completed measurement method will be applied to replace a manual measurement system for vehicle bodies and parts by an automated system.

• 한국광학회지
• /
• 제23권3호
• /
• pp.103-107
• /
• 2012

본 논문에서는 반도체 포화 흡수체 거울 (SESAM)에 입사되는 단위 면적당 광세기 변화에 따른 이터븀 첨가 광섬유 레이저의 모드 잠금 출력 특성을 고찰하였다. 단위 면적당 광세기를 변화시키기 위해 공진기 내부에 설치된 렌즈의 초점거리를 조절하여 SESAM에 입사되는 광의 크기를 변화시켰다.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.313-318
• /
• 2011

10 GHz 고조파 모드잠금 고리형 반도체 광섬유 레이저의 외부 CW 광주입 효과를 연구하였다. 선폭 ~ 100 KHz의 코히어런트 외부 광주입에 의해 40 dB가 넘는 스펙트럼 빗살의 골짜기와 30 dB가 넘는 슈퍼모드 비팅 잡음 억제효과를 얻을 수 있었다. 저가의 주입광원을 이용할 수 있는지를 조사하기 위해 주입광을 대략 10 MHz의 선폭을 갖는 DFB 레이저로 교체하였다. 그 결과, 스펙트럼 빗살의 골짜기는 유사한 특성을 보였으나, 슈퍼모드 비팅 잡음은 억제되기보다는 오히려 증가하는 것으로 관측되었다.

• 반도체디스플레이기술학회지
• /
• 제16권4호
• /
• pp.36-40
• /
• 2017

With an attempt to enhance the visibility of laser beam, we have investigated a black matrix with scattering particles by ray tracing simulations. As the scattering particle density is increased, the detected power by the receiver is increased, thereby enhancing the visibility. In reality, the visibility is reduced with increasing incident angle (away from the normal incidence) of laser beam, a phenomenon also observed by ray tracing simulations. It is due to the fact that the mean path is increased within a highly absorptive BM layer or a smaller number of rays hit the BM area when the incident angle is high. Embedding a number of scattering particles into BM may bring in crosstalk among pixels. However, it is negligible because scattered rays inside highly absorptive BM are re-scattered due to the high scattering particle density, decreasing the power of scattered rays into the active areas.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.717-722
• /
• 2012

In this work, we study on the effects of the oxygen pressure on the structural and crystalline of MgZnO thin films. MgZnO thin films were deposited on p-Si (111) substrates by using pulsed laser deposition. The X-ray diffraction analysis and energy-dispersive X-ray results revealed that as the oxygen pressure increased and Mg content in the MgZnO films decreased. Also Crystal structure was changed from cubic rock salt to hexagonal wurtzite. Alpha step and atomic force microscopy results showed that the thickness of the films are about 100 nm, and it has been found that the MgZnO (002) preferred orientation were deposited with increasing the oxygen pressure. Therefore, the effect of the preferred orientation, the crystallization grew in the form of the columnar; Grain size and RMS of the films were increased with increasing oxygen pressure.