• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.1
• /
• pp.67-72
• /
• 1987

InSb TFT is fabricated by the vacuum evaporation method and I-V characteristics are measured. Employing Davidon Fletcher-Powell algorithm, the device parameters are extracted. The current-voltage relations calculated by extracdted parameters are in good agreement with experimental results. It is found that optimization technique may be more simple and accurate than curve fitting method in device parameters extration.

• Design & Manufacturing
• /
• v.12 no.1
• /
• pp.36-40
• /
• 2018

The car requires an inside mirror installed between the driver's seat and the passenger's seat to ensure the driver's rear and side view of the driver. Inside mirrors must always be attached to the vehicle to ensure the driver's visibility. Inside mirrors attached to the windshield of a vehicle are always exposed to direct sunlight and should be semi-permanently usable in hot and humid summer weather in Korea. Therefore, the mirror mount, which is the junction of the inside mirror, is particularly important in corrosion resistance and wear resistance suitable for humidity. Mirror mounts are currently difficult to manufacture due to their reliance on powder molding technology in advanced countries such as Japan and Germany. This paper focuses on the fabrication of high corrosion resistant stainless mirror mounts by vacuum sintering technique and focuses on the selection of materials suitable for the production of mirror mounts through experiments of 300 series stainless steel and 400 series stainless steel manufactured by vacuum sintering.

• Analytical Science and Technology
• /
• v.33 no.3
• /
• pp.159-166
• /
• 2020

Vacuum metal deposition (VMD) is effective to develop latent fingerprints on non-porous and semi-porous surfaces. VMD can be used in cases when fingerprints that can not be developed by generalized techniques or deposited on difficult surfaces. The recommended surfaces for VMD techniques include vinyl, polymer bills, magnetic coated tickets, etc. In this study, the minimum amount of gold input was explored for developing fingerprints from at least 12 hours to up to 28 days after deposit fingerprint on the pink high density polyethylene envelope (HDPE) and low density polyethylene envelope (LDPE), which are mainly used as delivery envelopes. And the results were compared with the effects of black powder and fluorescent powder. In addition, delivery envelopes used for delivery were collected, then classified as HDPE and LDPE and pseudo-operation test was performed. As a result, VMD method developed good quality of fingerprints.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.44-49
• /
• 1999

A study was conducted to investigate the possibility of processing seasoned and semi-dried right-eyed flounder (Pseudopleuronects herzensteini) and to examine its quality during storage at $\pm$$3^{\circ}C$ by analyzing the factors such as moisture content, pH, volatile basic nitrogen (VBN), viable cell count and peroxide value (POV). For processing of the seasoned and semi-dried product, optimum conditions of drying temperature and drying time were $20^{\circ}C$ and 4 hrs, respectively, under 50$\pm$5$\%$ of relative humidity and 2 m/sec of air blast speed. The shelf-lives of the products by vacuum-packaging method in nylon/polyethylene/linear low density polyethylene (0.015/0.045/0.040 mm) laminated film bag were 35 and 16 days during storage at $-3^{\circ}C$ and $3^{\circ}C$, respectively.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.925-931
• /
• 1997

An attempt was made in this study to investigate the possibility of processing seasoned and semi-dried horse mackerel (Tracharus japonnicus) and to examine its keeping quality, by analyzing the factors such as water content, pH, volatile basic nitrogen, viable cell count, peroxide value, color value and sensory evaluation. For processing of the seasoned and semi-dried product, optimum conditions of drying temperature and drying time were $20^{\circ}C$ and 4 hr, respectively, under $50{\pm}5%$ of relative humidity and 2 m/sec of air blast speed. The shelf-life of the products, vacuum-packaging method in nylon/polyethylene/linear low density polyethylene $(0.015/0.045/0.04\;{\mu}m)$ film bag, was 42 days during storage at $-3{\pm}0.5^{\circ}C$, while that of unpackaged one was only 28 days.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.373-373
• /
• 2013

높은 효율의 InGaN/GaN 전광소자는 현대 조명 산업에 필수적인 역할을 하고 있다. 그러나 전광소자의 효율을 높이는 데에는 여러가지 한계들이 있다. 예를 들면 높은 전류에서의 효율저하, GaN 의 전위결함에 의한 비발광 재결합의 발생 등이 있다. 이러한 한계를 극복하고자 InGaN/GaN 전광소자의 효율을 높이기 위해 사파이어 기판의 표면을 거칠게 바꾸는 방법, 무분극 전광소자, 표면 플라즈몬 등 여러가지 많은 방법들이 개발되고 있다. c-plane InGaN/GaN LED 기반의 표면 플라즈몬 실험은 많은 연구가 수행되고 있으나, m-plane InGaN/GaN LED 기반의 표면 플라즈몬은 아직 연구가 진행되지 않았다. 본 실험의 목적은 표면 플라즈몬 효과를 이용하여 semi-polar InGaN/GaN LED의 광효율을 개선하는 것이다. 유기금속화학 증착 장비로 m-plane sapphire위에 $6{\mu}m$ 의 GaN 버퍼층을 증착하고 표면의 평탄화를 위해 $2{\mu}m$의 n-GaN을 증착하였다. 그 위에 3개의 다중양자우물 층을 증착하였고, 10 nm의 도핑이 되지않은 GaN를 증착하였다. 표면 플라즈몬 현상을 일으키기 위해 Ag박막을 10, 15, 20 nm 증착하여 급속 열처리 방법으로 $300^{\circ}C$에서 20분 열처리 하였다. 형성된 나노입자를 측정하기 위해 주사전자현미경으로 표면을 분석하였다. 표면플라즈몬에 의한 InGaN/GaN 광 세기를 측정하고자 여기 파장이 385 nm인 photoluminescence (PL) 를 사용하였다. 또한 내부양자효과의 증가를 확인하기 위해 PL을 이용하여 온도를 10~300 K까지 20 K 간격으로 광세기를 측정하였다. 향상된 내부 양자효과가 표면 플라즈몬에 의한 것임을 증명하기 위해 time-resolved PL을 이용하여 운반자 수명시간을 구하였다.

• Journal of the Korean Vacuum Society
• /
• v.6 no.3
• /
• pp.249-254
• /
• 1997

We investigated characteristics of Fe-doped semi-insulating InP by means of photoreflectance(PR) measurement. The band gap energy($E_0$) and broadening parameter($\Gamma$) from PR signals at 300K are 1.336 eV and 11.2 meV, respectively. As the temperature is decreased from 300 to 80 K, PR signals are varied from an overlapped shape of exciton and 2-dimensional band gap transitions(300 K) to that of exciton transition(80 K). We calculated Varshni coefficient($\alpha=0.94\pm$0.07 meV/K, $\beta=587\pm$35.2 K) and Bose-Einstein coefficient ($a_B=33.6{\pm}2.02meV$ , $\theta=165\pm$33K). After annealing of isothermal and isochronism crystallinity of InP is found to be excellent when annealed at $300^{\circ}C$ for 10~20 min, qualitatively.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.17-29
• /
• 2017

IRecently, researches on the recognition of indoor user situations through various sensors in a smart home environment are under way. In this paper, the case study was conducted to determine the operation of the robot vacuum cleaner by inferring the user 's indoor situation through the operation of home appliances, because the indoor situation greatly affects the operation of home appliances. In order to collect learning data for indoor situation awareness model learning, we received feedbacks from user when there was a mistake about the cleaning situation. In this paper, we propose a semi-supervised learning method using user feedback data. When we receive a user feedback, we search for the labels of unlabeled data that most fit the feedbacks collected through genetic algorithm, and use this data to learn the model. In order to verify the performance of the proposed algorithm, we performed a comparison experiments with other learning algorithms in the same environment and confirmed that the performance of the proposed algorithm is better than the other algorithms.

• Journal of the Korea Furniture Society
• /
• v.14 no.2
• /
• pp.21-29
• /
• 2003

This study was carried out to investigate characteristics of plywood overlaid with softwood veneers densified by resin impregnation and compression. The resin impregnability of Korean pine veneer under atmospheric pressure soaking was greater than that of larch, and impregnability of melamine resin was slightly greater than phenolic resin. It was suggested that resin impregnation ratio was affected by density and thickness of veneer. The largest melamine resin impregnation ratio of 50.7% was obtained with 1.26mm thick Korean pine veneer, and the lowest phenolic resin impregnation ratio of 11.7% with 3.41mm thick larch veneer. Therefore, it was suggested that the vacuum-pres sure-soak treatment is required at thick larch veneer. In densifying resin-impregnated veneers, densification ratio from 13.4 to 31.2% was obtained by high pressure from 15.6 to $20.8kgf/cm^2$. Impregnation of melamine resin also showed relatively greater at densification than that of phenolic resin. So it showed the degree of densification of about 20% or greater. It was seemed that adhesive bonding strength of plywood(base panel) which was directly pressed and overlaid with resin-impregnated veneer was affected by resin tackiness after resin impregnation followed by semi-drying. In laboratory scale, melamine resin impregnation was more favorable for the development of adhesive bonding strength owing to moisture control.

• Analytical Science and Technology
• /
• v.27 no.4
• /
• pp.187-195
• /
• 2014

It is very important to minimize the damage of latent fingerprints at enhancing the contrast. This study proves the enhancement effects of cyanoacrylate-fumed latent fingerprints using p-dimethylaminobenzealdehyde (DMAB) on semi-porous surfaces and the influence factors. The latent fingerprints in experiment were developed for cyanoacrylate treatment in a vacuum chamber and used after drying at room temperature for 24 hours. For fluorescence staining, the cyanoacrylate-developed marks using DMAB were sublimated during 48 hours under the different conditions of surface area, temperature, atmospheric pressure. First experiment showed how surface area effects on the sublimation rate and fluorescence intensity by DMAB of particle size and container size. In addition, the fluorescence staining using DMAB with solvent-free contact method had the greatest fluorescence intensity after 36 hours and a low fluorescence intensity over a certain size of surface area. Second experiment showed that the evaporation of DMAB solid crystals got a satisfying result in a temperature of $20^{\circ}C$ and reduced time to get the greatest fluorescence intensity. It took a long time to get a optimum level of fluorescence intensity at $30^{\circ}C$ or more and it was less effective in fluorescence intensity. Third experiment on the pressure indicated that the fluorescence intensity of vacuum was weaker than nonvacuum but it was inapplicable to very high variations in pressure.