• 제어로봇시스템학회논문지
• /
• 제13권7호
• /
• pp.683-687
• /
• 2007

In last decades, several linearization methods for the AOA measurements have been proposed, for example, Gauss-Newton method and Closed-Form solution. Gauss-Newton method can achieve high accuracy, but the convergence of the iterative process is not always ensured if the initial guess is not accurate enough. Closed-Form solution provides a non-iterative solution and it is less computational. It does not suffer from convergence problem, but estimation error is somewhat larger. This paper proposes a Self-Tuning Weighted Least Square AOA algorithm that is a modified version of the conventional Closed-Form solution. In order to estimate the error covariance matrix as a weight, a two-step estimation technique is used. Simulation results show that the proposed method has smaller positioning error compared to the existing methods.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.57-64
• /
• 2001

This study presents an self tuning regulator(STR) to improve the air-fuel ratio control of performance of gasoline engine. The STR is designed based on the nonlinear dynamic engine model, and the performance of the STR is evaluated through the simulation and experiments. The STR shows better performance than a conventional PI controller in terms of the response time and disturbance rejection. Since the STR has less calculation load than the complex nonlinear controller, this algorithm can be easily applied to on-board engine controller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 B
• /
• pp.702-704
• /
• 1997

In this paper, we applied self-tuning controller with I-PD type to process with time delay's. Process parameters are estimated by the recursive least squares algorithm, and optimal gains are obtained. This paper shows self-tuning controller with I-PD type performs better than that of general PID type for the nonlinear system with sudden change of set-points.

• 대한전자공학회논문지
• /
• 제22권5호
• /
• pp.17-23
• /
• 1985

This paper describes a method for the design of a self-tuning controller of single-input/single-output systems with system noises and obsrrvation noises. The method uses state-space techniques to assign the closed-loop system poles to desired locations, but the control law is made up of process input and output measurement values, so that state estimation is unnecessary. Also the difficulties of tracking of reference inputs in state.space pole-placing control are tackled by including the reference input in the cost function proposed by Beger.

• ETRI Journal
• /
• 제31권6호
• /
• pp.755-764
• /
• 2009

This paper presents a switched self-biasing and a tail current-shaping technique to suppress the 1/f noise from a tail current source in differential cross-coupled inductance-capacitance (LC) voltage-controlled oscillators (VCOs). The proposed LC VCO has an amplitude control characteristic due to the creation of negative feedback for the oscillation waveform amplitude. It is fabricated using a 0.13 ${\mu}m$ CMOS process. The measured phase noise is -117 dBc/Hz at a 1 MHz offset from a 4.85 GHz carrier frequency, while it draws 6.5 mA from a 0.6 V supply voltage. For frequency tuning, process variation, and temperature change, the amplitude change rate of the oscillation waveform in the proposed VCO is 2.1 to 3.2 times smaller than that of an existing VCO with a fixed bias. The measured amplitude change rate of the oscillation waveform for frequency tuning from 4.55 GHz to 5.04 GHz is 131 pV/Hz.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권5호
• /
• pp.225-234
• /
• 2000

In this paper, we present an nonlinear PID controller with network based compensator which consists of a conventional PID controller that controls the linear components and neuro-compensator that controls the output errors and nonlinear components. This controller is based on the Harris's concept where he explained that the adaptive controller consists of the PID control term and the disturbance compensating term. The resulting controller's architecture is also found to be very similar to that of Wang's controller. This controller adds a self-tuning ability to the existing PID controller without replacing it by compensating the output errors through the neuro-compensator. Various simulations and comparative studies have proven that the proposed nonlinear PID controller produces superior results to other existing PID controllers. When applied to an actual magnetic levitation system which is known to be very nonlinear, it has also produced an excellent results.

• 대한전기학회논문지
• /
• 제38권3호
• /
• pp.247-255
• /
• 1989

본 논문에서는 작업좌표에서 로보트 매니퓰레이터에 대해 적분 동작을 갖는 오차 모델과 극점배치 자기동조제어기를 제안하였다. 이 제어기는 로보트 동력학의 자세한 표현없이 부하 외란에 의한 자류편차를 제거할 수 있다. 오차 모델 배개변수는 반복 최소 자승 알고리즘에 의해 추정되고, 제어기 매개 변수는 극점 배치 방법에 의해 결정된다. 작업좌표에서 제안된 제어 계통의 성능을 평가하기 위하여 부하를 갖는 3개 관절 2개 링크의 공간 로보트 매니퓰레이터에 의해 컴퓨터 시뮬레이션을 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1930-1933
• /
• 1991

In this paper, the robustness of self turning controller on the continuous time-delay system is investigated. The polynomial identification method using continuous time exponentially weighted least square algorithm is used for estimating the time.-delay system parameters. The pole-zero and pole placement method are adopted for the control algorithm. On considering the control weighting factor and reliability filter the effect of unmodeled dynamics of the plant are examined by the simulation.

• 제어로봇시스템학회논문지
• /
• 제13권4호
• /
• pp.329-334
• /
• 2007

This paper deals with self-tuning of fuzzy control systems. The fuzzy logic controller(FLC) has parameters that an: input and output scaling factors to effect control output. Tuning method is proposed for the scaling factor. In this paper. it is studied to control and to monitor the remote system statues using SOAP for communicate between the server part and the client part. The remote control system is controlled by using a web browser or a application program. The server part is waiting for the request of client part that uses internet network for communication each other and then the request is reached. the server part saves client data to the database and send a command set to the client part and then the client part sends command to controller in a cool chamber. The administrator can control and monitor the remote system just using a web browser. The effects of membership functions, defuzzification methods and scaling factors are investigated in the FLC system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권2호
• /
• pp.136-144
• /
• 2014

The existing conventional motion controller does not perform well in the presence of nonlinear properties, uncertain factors, and servo lag phenomena of industrial actuators. Hence, a feasible and effective fuzzy self-tuning proportional integral derivative (PID) and feed-forward control scheme is introduced to overcome these problems. In this design, a fuzzy tuner is used to tune the PID parameters resulting in the rejection of the disturbance, which achieves better performance. Then, both velocity and acceleration feed-forward units are added to considerably reduce the tracking error due to servo lag. To verify the capability and effectiveness of the proposed control scheme, the hardware configuration includes digital signal processing (DSP) which plays the main role, dual-port RAM (DPRAM) to guarantee rapid and reliable communication with the host, field-programmable gate array (FPGA) to handle the task of the address decoder and receive the feed-back encoder signal, and several peripheral logic circuits. The results from the experiments show that the proposed motion controller has a smooth profile, with high tracking precision and real-time performance, which are applicable in various manufacturing fields.