• Restorative Dentistry and Endodontics
• /
• v.21 no.2
• /
• pp.652-663
• /
• 1996

The purpose of this study was to evaluate the tensile bond strength to tooth structure of composite resin and glass ionomer cement according to filling methods and light curing units. In this study, two class V cavities were prepared on the buccal surface of each tooth of 140 extracted human molars, and they were randomly assigned into 3 experimental groups with 40 teeth and control group with 20 teeth. And then, each experimental groups subdivided into 2 groups(A,B) according to light curing units. The cavities of each group were filled with the CLEARFIL FII self curing resin(Control Group), Z-100 light curing resin(Group 1), Vitremer$^{TM}$ light curing glass ionomer cement(Group 2) and Z-100 light curing resin over the Vitrebond$^{TM}$ liner(Group 3). And subdivided A Group used Argon Laser(SPECTRUM$^{TM}$, U.S.A.), B Group used XL 1,000 curing light (3M, U.S.A.). The specimens underwent temperature changed from $5^{\circ}C$ to $55^{\circ}C$ five hundred times. After thermocycling, specimens were stored in 100% relative humidity at $37^{\circ}C$ for 24 hours. And then, the tensile bond strength of specimens were calculated with Universal Testing Machine(AGS-100A, Japan). The results were as follows : 1. Among the experimental groups, the group 2-B showed the highest tensile bond strength ($18.89{\pm}7.80$) and the group 1-A showed the lowest tensile bond strength ($11.68{\pm}2.28$). There was significant difference between group 2-B and group 1-A(p<0.01). 2. Between the light curing units, the XL 1,000 unit showed higher tensile bond strength ($16.63{\pm}3.20$) than that of the Argon Laser unit ($13.73{\pm}2.30$). There was significant difference between XL 1,000 and Argon Laser(p<0.01). 3. About filling methods and materials, the group 2 showed the highest tensile bond strength ($17.56{\pm}1.89$) and the group 1 showed the lowest tensile bond strength($13.03{\pm}1.90$). There was significant difference between group 2 and group 1,3(p<0.01). In conclusion, the results showed that the glass-ionomer cement that cured by XL 1,000 light curing unit demonstrated significantly higher tensile bond strength than other curing unit and filling methods.

• Restorative Dentistry and Endodontics
• /
• v.36 no.1
• /
• pp.50-58
• /
• 2011

Objectives: The purpose of this study was to compare the microshear bond strength (uSBS) of two totaletch and four self-etch adhesive systems and a flowable resin to enamel. Materials and Methods: Enamels of sixty human molars were used. They were divided into one of six equal groups (n = 10) by adhesives used; OS group (One-Step Plus), SB group (Single Bond), CE group (Clearfil SE Bond), TY group (Tyrian SPE/One-Step Plus), AP group (Adper Prompt L-Pop) and GB group (G-Bond). After enamel surfaces were treated with six adhesive systems, a flowable composite resin (Filek Z 350) was bonded to enamel surface using Tygon tubes. the bonded specimens were subjected to uSBS testing and the failure modes of each group were observed under FE-SEM. Results: 1. The uSBS of SB group was statistically higher than that of all other groups, and the uSBS of OS, SE and AP group was statistically higher than that of TY and GB group (p < 0.05). 2. The uSBS for TY group was statistically higher than that for GB group (p < 0.05). 3. Adhesive failures in TY and GB group and mixed failures in SB group and SE group were often analysed. One cohesive failure was observed in OS, SB, SE and AP group, respectively. Conclusions: Although adhesives using the same step were applied the enamel surface, the uSBS of a flowable resin to enamel was different.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.105-118
• /
• 2015

Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusions - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.

• Journal of Distribution Science
• /
• v.13 no.1
• /
• pp.47-55
• /
• 2015

Purpose - The objective of this study is to verify whether there are differences between Korean and Chinese consumers in the importance of the attributes such as shopping value and loyalty in social commerce. With the purpose of finding out these differences, the following questions are set up as research questions. First, will there be a difference between Korea and China in the importance of attributes of social commerce? Second, will there be a difference between Korean and Chinese consumers in shopping value? Third, will there be a difference between Korean and Chinese consumers in their loyalty? Research design, data, and methodology - The researchers collected data through self-administered questionnaires from Korean and Chinese consumers who had used social commerce within the past six months before answering the questionnaire. First, for social commerce users in Korea, comprising male and female university students in Chungcheong, a questionnaire was circulated. For social commerce users in China, university students within Beijing were surveyed. Responses to 336 questionnaires were used, excluding those with no answers or unreliable answers. Data coding and data cleaning were used. SPSS 18.0 was used. First, exploratory factor analysis is done to verify the validity of testing tools, and Cronbach's α coefficient is used to verify credibility. For factor analysis, the Varimax method is used. To verify the internal consistency reliability of each factor, the Cronbach's α coefficient is used to verify the credibility. Second, a T-test is done to verify differences between Korean and Chinese consumers for the importance of attributes. Third, ANOVA (Analysis of variance) is done to verify differences between Korean and Chinese consumers in shopping value and loyalty. Results - When Korean and Chinese consumers use social commerce, first, the importance of the attributes of social commerce is affected by four factors; playfulness and economic factors are more important to Korean consumers than Chinese consumers. As for informativeness factors, including product information and quality, and buyer comments, there was no confirmed difference between Korean and Chinese consumers. The convenience factor is more important to Chinese consumers than Korean consumers. Second, the factors affecting shopping value for Korean and Chinese consumers were hedonic shopping value and rational shopping value. To see the difference between Korean and Chinese consumers in shopping value factors, a t-test is conducted. As a result, in the rational shopping value factors of social commerce, Korean consumers scored higher than did Chinese consumers. These results were verified to be meaningful through statistics. In the hedonic shopping value factor of social commerce, Korean consumers scored higher than Chinese consumers. These results showed a significant difference. Third, loyalty in social commerce is higher for Chinese consumers than for Korean consumers. However, there is no difference in loyalty depending on sex. Conclusion - These results will hopefully be valuable and used in the future by Korean companies that wish to enter the Chinese social commerce market.

• Journal of Legislation Research
• /
• no.53
• /
• pp.269-310
• /
• 2017

This article aims at the study on Improvement of legal System which is related to automated vehicles in the era of the 4th industrial revolution. Legal aspects of driving automation have two view points. One is to permit a automated vehicle, the other is to regulate the behavior of driver on the road. Signifying elements of the 4th industrial revolution are IoT, AI, big data, cloud computing etc. Automated vehicles are the imbodiment of those new ICT technologies. The vehicle management act(VMA) rules about vehicle registration and approval of vehicle types. VMA defines a automated vehicle as a vehicle which can be self driven without handling of driver or passenger. Vehicle makers can take temporary driving permission for testing and research the driving automation. Current definition of automated vehicle of VMA is not enough for including all levels of SAE driving automation. In the VMA must be made also a new vehicle safty standard for automated vehicle. In the national assembly is curruntly pending three draft bills about legislation of artificial intelligence. Driving automation and AI technologies must be parallel developed. It is highly expected that more proceeding research of driving automation can be realized as soon as possible.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.224-234
• /
• 2019

Waterproof layers are installed in civil engineering structures and bridge construction is commonly finished by applying a layer of regular or asphalt concrete above the waterproof layer. However, asphalt materials are susceptible to melting at high temperature due to its superior temperature sensitivity, and this causes the waterproofing material to melt due to the high temperature of the asphalt concrete, thereby increasing the defect occurrence rate due to the thickness reduction. In this study, tensile strength and elongation of hard and soft type of MMA(Methyl Methacrylate) applied to bridges were compared in accordance to standard performance criteria based on different mixture ratios. Results of comparative testing showed that hard MMA resin can display a satisfactory tensile strength, and soft MMA resin displays satisfactory elongation properties, but as the two resin types are separately used, neither types are able to satisfy the standard requirements outlined in KS F 4932. When the amount of the powder exceeds 56.25% of the total amount, voids are generated on the surface after curing and self leveling was impossible and a heterogeneous surface is formed. Furthermore, when the hard resin: soft resin: powder mixture ratio was set to 15g: 85g: 150g. the tensile strength was $1.5N/mm^2$ and the elongation percentage was 133% which satisfy the tensile performance of KS F 4932.

• Journal of the Korea Convergence Society
• /
• v.12 no.5
• /
• pp.93-99
• /
• 2021

Recently, the miniaturization and digitalization for the inspection devices of point-of-care testing (POCT) are rapidly evolving. In the urine test, a lot of researches on index paper technology are being conducted because people can be self-diagnosed through visual color comparison using a urine test paper, Dipsick. The purpose of this study is to analyze the RGB values from the color changes on Dipstick Pad, which isused for urine test, using a smartphone camera. To this end, the primary, analytes in urine wasdiabetes-related parameters such as glucose, ketone body and pH, which is the most frequently tested elements, and we pursuited to quantify the changes in dipstick color caused from artificial urine containing different ranges of sugar, ketone body, and pH. In this experiment, changes in RGB values under bright and dark illuminances were compared, and changes in RGB value were monitored as a function of concentration of analytes under the ambient illumination of laboratory. As a result, color separation at the bright luminance region was good, but it did not appearat the low luminance region, and the changed profiles in RGB value under different illuminances was suggested to correct the problem of the color separation algorithm.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.2
• /
• pp.165-172
• /
• 2019

The purpose of this study was to evaluate the effect of application time and phosphoric acid etching of 8th generation adhesives containing functional monomer on adhesive performance in primary teeth. 80 extracted non-carious human primary teeth were selected and divided into 8 groups based on 3 factors: (1) adhesive: G-Premio bond and Single bond universal; (2) application time: shortened time and manufacture's instruction; (3) acid etching mode: self-etching and total-etching. Shear bond strength was measured using a universal testing machine, and fractured surface were observed under scanning electron microscope. Microleakage was evaluated by dye penetration depth. G-Premio bond were not significant different in shear bond strength and microleakage depending on application time of adhesive and acid etching mode. In Single bond universal, shear bond strength of short application time was significantly lower than that of long adhesive application time (p = 0.014). Clinically applicable shear bond strength values (> 17 MPa) were identified in all groups. These results suggested that G-Premio bond be used clinically for a short application time without phosphoric acid etching.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.4
• /
• pp.291-298
• /
• 2021

Purpose: The Pedisole is a newly developed shoe-mounted wearable assessment system for analyzing balance and gait. This study aimed to determine the reliability and validity of the parameters provided by the system for static balance and gait analysis of healthy adults. Methods: This study included 38 healthy adults (22.4±1.9 years) with no history of injury in the lower limbs. All participants were asked to perform balance and gait tasks for undertaking measurements. For analysis of balance, both the smart Pedisole and Pedoscan systems were concurrently used to analyze the path length of the center of pressure (COP) and the weight ratio of the left and right for 10 s. Gait was measured using the smart Pedisole and GaitRite walkway systems simultaneously. The participants walked at a self-selected preferred gait speed. The cadence, stance time, swing time, and step time were used to analyze gait characteristics. Using the paired t-test, the intra-class coefficient correlation (ICC) was calculated for reliability. The Spearman correlation was used to assess the validity of the measurements. In total, data for balance from 36 participants and the gait profiles of 37 participants were evaluated. Results: There were significant differences between the COP path lengths (p<.050) derived from the two systems, and a significant correlation was found for COP path length (r=.382~.523) for static balance. The ICC for COP path length and weight ratio was found to be greater than .687, indicating moderate agreement in balance parameters. The ICC of gait parameters was found to be greater than .697 except for stance time, and there was significant correlation (r=.678~.922) with the GaitRite system. Conclusion: The newly developed smart insole-type Pedisole system and the related application are useful, reliable, and valid tools for balance and gait analysis compared to the gold standard Pedoscan and the GaitRite systems in healthy individuals.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.1
• /
• pp.591-596
• /
• 2022

Various COVID-19 quarantine guidelines and measures are being taken by country at the WHO, but the number of confirmed cases has not decreased significantly. In order to prevent the inflow and outflow of COVID-19 through individual droplets, it is mandatory to wear a mask anytime, anywhere. However, as virus bacteria entering the mask amplify, it pollutes the mask and causes a disgusting smell. In this paper, a new method of preventing the spread of COVID-19 was proposed by sterilizing the mask with a dental gait spray introduced into the mask that has been used for a long time. Dental gargle water is usually produced by electrolysis of tap water, and the unstable ion water (HOCl) dissolved in water penetrates the cell barrier of various viruses and fails to act in its nucleus, causing water to self-purify. As a result of the experiment, when the mask used for a long time was washed with gargle water spray, the washed mask was dried after 10 minutes, and the smell of virus droplets or saliva almost disappeared. In particular, as a result of MOS testing the fit of the subjects who participated in the mask cleaning, it was excellent at 4.4 on average. Therefore, the mask was disposable, but if the spray was washed in the proposed method more than twice a day, the mask could be used in a comfortable state for more than a week.