• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.234-235
• /
• 2017

The bonding of the asphalt-based waterproof sheet is carried out in such a manner that the sheet and the sheet are adhered together and the lower adhesive layer of one sheet is adhered to the upper film layer of the other sheet, and the asphalt layer and the PE or HDPE film layer are bonded. When the joints are formed in the form of junctions between heterogeneous materials and exposed to the concrete joint movements and other deteriorating factors, the integrity of the joints can deteriorate and problems such as lifting and peeling off of the joints can occur. Therefore, this study was carried out to prevent unstable joint adhesion of the asphalt compound and film layer and to prevent defects in the adhesion between self - adhesive waterproof sheets. The self-adhesive waterproof sheet of this study can maximize bond stability by inducing bond between asphalt compounds during sheet-to-sheet bonding, thereby improving bonding strength.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.303-333
• /
• 2014

The right to self-determination in regard to one's body is a key element of human dignity, privacy and freedom. It is constitutionally enshrined in the guarantee of human dignity, in the general right of personality and, most concretely of all, in the right to physical integrity. In principle No-one may trespass another person's body against his will, whether this act improves his physical condition or not. This right of self-determination applies equally to healthy and to sick people. Hence everyone has the right either to permit or to refuse a medical treatment, unless he can not make a rational decision. If the person does not consent himself, for whatever reason, another one must do for him as guardian. Representation in consent to medical treatment is therefore the exception of self-determination rule. This article explored, 1. who can consent to the medical treatment in the case of the mentally incapacitated adult and the infant, 2. what kind of consent to the medical treatment can the deputy determinate for the mentally incapacitated adult and the infant, 3. when the deputy can not determinate without permission of the court, and 4. what can the doctor do in the case of conflict between minors and guardians.

• Korean Medical Education Review
• /
• v.24 no.3
• /
• pp.215-230
• /
• 2022

The purpose of this study was to explore the psychosocial characteristics of academically maladjusted students and the College's current status regarding academic maladjustment based on 4-year medical student cohort data collected from 2018 to 2021 and through interviews with 10 medical education experts using the integrated research method. This study included 223 students who consented to inclusion in the student cohort and participated in the emotional behavior test and college adaptability test of whom 65 students experienced academic maladjustment. Academically maladjusted students had significantly higher scores for social stress, anxiety, sense of inadequacy, attention, hyperactivity, and school maladjustment, and significantly lower scores for relationships with parents, interpersonal relationships, self-esteem, self-confidence, and self-strength. Academic and social integrity, emotional stability, university satisfaction, and university service satisfaction were all significantly lower in the academically maladjusted students than in the non-maladjusted group. The expert interviews indicated that academic maladjustment was mainly recognized as a personal problem, with causes such as lack of motivation and learning methods, vulnerability to stress, lack of social relationships and alienation, lack of support from the family, and insufficient resilience. Systematic support other than counseling for academically maladjusted students is required, and an early diagnosis and preventive intervention are important.

• Steel and Composite Structures
• /
• v.42 no.3
• /
• pp.315-323
• /
• 2022

Shear connectors are key elements that ensure integrity in a composite system. The primary purpose of a shear connector is to bring a high degree of interaction between composite elements. A wide variety of connectors are available for hot-rolled composite construction, connected to the beam through welding. However, with cold-formed members being very thin, welding of shear connectors is not desirable in cold-formed composite constructions. Shear connectors for cold-formed elements are limited in studies as well as in the market. Hence in this study, three different types of shear connectors, namely, single-channel, double channel, and self-tapping screw, were considered, and their performance assessed by the Push-out test as per Eurocode 4. The connection between channel shear connectors and the beam was made using self-tapping screws to avoid welding. The performance of the connectors was analyzed based on their ultimate capacity, characteristic capacity, ductility, and slippage during loading. Strength to weight ratio was also carried out to understand the proposed connectors' suitability for conventional ones. The results showed relatively higher initial stiffness and ductility for double channel connectors than other connectors. Also, self-tapping screws had a higher strength to weight ratio with low ductility.

• Journal of Korean Classical Literature and Education
• /
• no.15
• /
• pp.5-29
• /
• 2008

This study examined how Ji-Won Park(Yeonam) created the eaning of things based on the epic of self and how his travel experience manifested on the epic of self. First of all, the author examined that how Yeonam interpreted the meaning of things based on his own reflection using the examples of "The Golden Arbor" and "Baeki-Sukje." As a result, the author found that Yeonam focused on the material value of "the Golden Arbor" rather than the reason of creation of "The Golden Arbor." Yeonam also used "Baeki-Sukje" as an ironic representation rather than the original meaning of loyalty and integrity. Second, it helped to present personal self epic since travel experience and the atmosphere of the travel journey could reduce the pressure from the epic of society on individuals. For instance, when Ji-Won Park (Yeonman) traveled the China (the country of Chung) where society promoted public welfare, Yeonman was able to express himself freely which showed utilitarian over justice. Finally, the author talked about how a book of travels can be used for the case of literature therapy since "Yeulhailgi" was written by Yeonam while he was traveling. The author indicated that it might be useful for the patients to write own travel journey since the therapist could analyze the mind of patients by the epic of self. In addition, using a book of travels also can be valuable for the patients since the therapist could analyze the condition of patients as well as help patients see through themselves while reading a book of travels.

• Journal of Sensor Science and Technology
• /
• v.33 no.1
• /
• pp.34-39
• /
• 2024

Energy harvesting technology that converts the wasted energy resources into electrical energy is emerging as a semipermanent power source for self-powered electronics and wireless low-power sensor systems. Among the various energy conversion techniques, flexible piezoelectric energy harvesters (f-PEHs), using materials with piezoelectric effects, have attracted significant interest because they can harvest a small mechanical energy into electrical signals without constraints of time and space in various environments. In this study, we used a flexible piezoelectric composite film fabricated by dispersing BaHf_xTi_(1-x)O₃ (x = 0, 0.01, 0.05, 0.1) piezoelectric powders inside a polymeric matrix to facilitate f-PEHs. The fabricated f-PEH with optimal Hf contents (x = 0.05) generated a maximum output voltage of 0.95 V and current signal of 130 nA with stable electrical/mechanical disabilities under periodically bending deformations. In addition, we demonstrated a cantilever-type f-PEH and investigated its potential as a sensor by characterizing the output performance under mechanical vibrations at various frequencies. This study provides the breakthrough for realizing self-powered energy harvesting and sensing systems by adopting the lead-free piezoelectric composites under vibrational environments.

• Journal of Korean Dental Science
• /
• v.2 no.2
• /
• pp.5-11
• /
• 2009

Objectives : This study investigated the hypothesis that the dentin bond strength of self-etching adhesives (SEAs) may be improved by applying a coat of hydrophobic, neutral adhesive resin in addition to SEA. Method and Materials : The bond strengths of two SEAs - Experimental SEA (EX) and Adper Prompt (AP) - were measured with three bonding protocols. The D/E resin of All-Bond 2 was applied as the hydrophobic, neutral adhesive. Clearfil SE Bond (SE, self-etching primer system) and All-Bond 2 (AB, total etching system) were used as references. The following protocols were used: (1) EX1 (EX 1 coat); (2) EX2 (EX 2 coats); (3) EX+ (EX 1 coat + D/E resin); (4) AP1 (AP 1 coat); (5) AP2 (AP 2 coats); (6) AP+ (AP 1 coat + D/E resin); (7) SE (SE primer + SE bond); (8) SE+ (SE primer + D/E resin); (9) AB (etching + AB primer + D/E resin). Filtek Z250 composite resin was built up and the microtensile bond strength (MTBS) values of the specimens were compared. The fractured surfaces were observed using SEM. Results : When SEA was used as self-etching primer and hydrophobic, neutral adhesive was applied as well, MTBS was significantly higher than that when either one coat or two coats of SEA only were used (p < 0.05). Conclusion : The hydrophobic, neutral adhesive improved the integrity of the bonded interface obtained with SEA.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.24.2-24.2
• /
• 2009

Nanostuctures such as nanodot and nanowire have been extensively studied as building blocks for nanoscale devices. However, the direct growth of the nanostuctures at the desired position is one of the most important requirements for realization of the practical devices with high integrity. Self-assembled nanotemplate is one of viable methods to produce highly-ordered nanostructures because it exhibits the highly ordered nanometer-sized pattern without resorting to lithography techniques. And selective epitaxial growth (SEG) can be a proper method for nanostructure fabrication because selective growth on the patterned openings obtained from nanotemplate can be a proper direction to achieve high level of control and reproducibility of nanostructucture fabrication. Especially, SiGe has led to the development of semiconductor devices in which the band structure is varied by the composition and strain distribution, and nanostructures of SiGe has represented new class of devices such nanowire metal-oxide-semiconductor field-effect transistors and photovoltaics. So, in this study, various shaped SiGe nanostructures were selectively grown on Si substrate through ultrahigh vacuum chemical vapor deposition (UHV-CVD) of SiGe on the hexagonally arranged Si openings obtained using nanotemplates. We adopted two types of nanotemplates in this study; anodic aluminum oxide (AAO) and diblock copolymer of PS-b-PMMA. Well ordered and various shaped nanostructure of SiGe, nanodots and nanowire, were fabricated on Si openings by combining SEG of SiGe to self-assembled nanotemplates. Nanostructure fabrication method adopted in this study will open up the easy way to produce the integrated nanoelectronic device arrays using the well ordered nano-building blocks obtained from the combination of SEG and self-assembled nanotemplates.

• Journal of Families and Better Life
• /
• v.34 no.5
• /
• pp.35-52
• /
• 2016

The purpose of this study was to compare college students' emoticon use for positive behavior and to analyze the impact of the factors. This study is consisted of 66 questions based on Social demographic characteristics, personality characteristics factors and both scales of emotional expression. The operational test was administered to 340 college students. In an effort to calibrate emoticon use of positive behavior, the results displayed significance differences depending on the gender and grade of the students. Women used more emoticons than men, and freshman used more emoticons than any other year of students. Women used more emoticons such as texts, images, and flash more than men. Students in their freshman year were shown to use more emoticons than students in other grade levels. Emotional expression was strongly related man with personality traits of integrity. Personality traits of sensitivity, openness, intimacy, and sincerity had a significant influence on the emotional expression. An emoticon is, therefore, be a useful tool to express their emotions. Male and female students with higher levels of congeniality had expressed more emotions that were self-defence ambivalent and concerned-relation ambivalent. However, in the case of the female students, those with higher levels of self-defence ambivalent emotional expressiveness had a lower usage of positive emoticons, while male students with higher levels of self-defence emotional expressiveness used more positive emoticons. Higher levels of congeniality among groups that use mobile emoticons with their parents, whether the frequency of use was high or low, were associated with higher levels of self-defence ambivalence and concerned-relation ambivalence. Those with higher levels of sincerity had low levels of self-defence ambivalence and concerned-relation ambivalence, and those with higher levels of concerned-relation ambivalence had higher levels of positive emoticon usage.

• Development and Reproduction
• /
• v.15 no.1
• /
• pp.71-76
• /
• 2011

Due to its role in maintaining the health of scientific societies, research ethics (or integrity) is notably receiving attention by academia, governments and even individuals who are not engaged in scientific researches. In this paper, I will introduce some valuable papers dealt with plagiarism as a representative research misconduct. In general, researcher's results that will soon be published must meet the crucial scientific criteria: originality, accuracy, reproducibility, precision and research ethics. The definition of plagiarism is "appropriation of another person's ideas, processes, results, or words without giving appropriate credit." Compared to fabrication and falcification, plagiarism is often considered as a minor misconduct. With intentionality, however, plagiarism can be corresponding to 'theft of intellectual product'. The context of plagiarism is not restricted to the stage of publication. It can be extended to prior stages of proposing (i.e. preparing the research proposal) and performing (executing the research), and reviewing (writing the review papers). Duplicate publication is regarded as a self-plagiarism in broad interpretation of plagiarism. To avoid dangers of plagiarism, earnest efforts from all members of scientific community are needed. First of all, researchers should keep 'transparency' and 'integrity' in their scientific works. Editorial board members and reviewers should keep fairness and well-deserved qualification. Government and research foundations must be willing to provide sufficient financial and policy support to the scientific societies; Up-graded editorial services, making good use of plagiarism detection tools, and thorough instruction on how to write a honest scientific paper will contribute to building up a healthy basis for scientific communities.