• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.767-772
• /
• 2012

In support of optimizing electrorefining technology for treating spent nuclear fuel, lithium drawdown has been investigated for separating actinides from molten salt electrolyte. Drawdown reaction selectivity is a major issue that requires investigation, since the goal is to remove actinides while leaving the fission products and other components in the salt. A series of lithium drawdown tests with surrogate fission product chlorides was run to obtain selectivity data with non-radioactive salts, develop a predictive model, and draw conclusions about the viability of using this process with actinide-loaded salt. Results of tests with CsCl, $LaCl_3$, $CeCl_3$, and $NdCl_3$ are reported here. Equilibrium was typically achieved in less than 10 hours of contact between lithium metal and molten salt under well-stirred conditions. Maintaining low oxygen and water impurity concentrations (<10 ppm) in the atmosphere was observed to be critical to minimize side reactions and maintain stable salt compositions. An equilibrium model has been formulated and fit to the experimental data. Good fits to the data were achieved. Based on analysis and results obtained to date, it is concluded that clean separation between minor actinides and lanthanides will be difficult to achieve using lithium drawdown.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.229-239
• /
• 2009

Orthogonal frequency division multiplexing (OFDM) has been adopted as a standard for various high data rate wireless communication systems due to the spectral bandwidth efficiency, robustness to frequency selective fading channels, etc. However, implementation of the OFDM system entails several difficulties. One of the major drawbacks is the high peak-to-average power ratio (PAPR), which results in intercarrier interference, high out-of-band radiation, and bit error rate performance degradation, mainly due to the nonlinearity of the high power amplifier. This paper reviews the conventional PAPR reduction schemes and their modifications for achieving the low computational complexity required for practical implementation in wireless communication systems.

• The Korean Journal of Pain
• /
• v.20 no.1
• /
• pp.54-59
• /
• 2007

Background: Selective transforaminal epidural block (STEB) has showen effectiveness as a diagnostic and therapeutic option for the management of patients with low back pain or sciatica. This study was carried out in order to determine the short-term effects and prognostic factors associated with STEB in patients with low back pain or sciatica. Methods: Ninety-seven patients were selectedfor participation in this study. Their diagnosis were based werewason the clinical symptoms and MRI findings. We performed STEB under fluoroscopic guidance and injected 3 ml of radio opaque dye in order to confirm the technical success of the procedure. We then injected 20 mg of triamcinolone mixed into 3 ml of 0.5% mepivacaine. One month later, we classified the patient outcomes as excellent, good, moderate or poor, according to the degree of reduction in VAS score from baseline. The independent variables assessed included symptom duration, block level, number of blocks, primary diagnosis, prior caudal block, anterior epidural space filling of dye, medication history, demographic data, radiating pain, back surgery and spondylolisthesis. Results: At a mean follow-up period of 1 month after STEB, excellent results were noted in the patients diagnosed with herniated lumbar disc (70%), non-specific spondylosis (54%), spinal stenosis (44%), and failed back syndrome (28%). The patients with epidural adhesion and combined spondylolisthesis were associated with poorer outcomes. Combined caudal block, symptom duration and the extent of epidural spread of the drug were not related to the effectiveness of the treatment. Conclusions: Selective transforaminal epidural block is effective in treating patients with radiculopathy, such as herniated lumbar disc, but it isrelatively ineffective in treating patients with structural deformities, such as failed back syndrome and spondylolisthesis.

• The Journal of the Korea Contents Association
• /
• v.8 no.3
• /
• pp.41-46
• /
• 2008

Many methods have been developed to overcome the PAPR(peak-to-average power ratio) problem. Selective mapping(SLM), partial transmit sequence(PTS), subblock phase weighting(SPW) and gradient descent(GD) are used widely to reduce the PAPR. In this paper, we present an effective PAPR reduction method that decreases the number of calculations through Radix-2 DIF IFFT procedure and GD method that transmits selected data sequence. The data sequence is constructed by choosing elements that satisfy threshold value as one part of the sequence and the rest elements of each sequence are chosen to have the lower papr operating, which yields performance improvement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1172-1180
• /
• 2007

OFDM system has very good high spectral efficiency and the robustness to the frequency-selective fading. Because of the high PAPR, OFDM signals can be distorted in nonlinear HPA(High Power Amplifier). So, to overcome the nonlinear distortion, it is very important to reduce the IMD value. With respect to the BER performance, IMD reduction method is better than the PAPR reduction method. However, IMD reduction method has much more system complexity because of the additional FFT processor in transmitter. In this paper, we study the OFDM communication system based on the IMD reduction method using SPW method. A new IMD reduction method is proposed to reduce the computational complexity. SPW method is to divide the input OFDM data into several sub-blocks and to multiply phase weighting values with each sub-blocks for the reduction of PAPR or IMD. Unlike the conventional method, the system size and computational complexity can be reduced.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.912-920
• /
• 2008

OFDM (Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OFDM signal consists of a number of independently modulated subcarriers, which can give a large PAPR (Peak-to-Average Power Ratio) when added up coherently. In this paper, we apply clipping and filtering to solve the PAPR problem and compensate the inband compensation using calculated EVM (Error Vector Magnitude). The proposed method can reduce the PAPR and inband distortion. From the results, we analyze the PAPR reducing efficiency and EVM, BER performance of proposed algorithm in the wireless communication system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.1-9
• /
• 2009

OFDM(Orthogonal Frequency Division Multiplexing) system is robust to frequency selective fading and narrowband interference in high-speed data communications. However, an OPDM signal consists of a number of independently modulated subcarriers and the superposition of these subcarriers causes a problem that can give a large PARR(Peak-to-Average Power Ratio). PTS(Partial Transmit Sequence) scheme can reduce the PAPR by dividing OFDM signal into subblocks and then multiplying the phase weighting factors to each subblocks, but computational complexity for selecting of phase weighting factors increases exponentially with the number of subblocks. Therefore, in this paper, MG-PSO(Modified Greedy algorithm-Particle Swarm Optimization) algorithm that combines modified greedy algorithm and PSO(Particle Swarm Optimization) algorithm is proposed to use for the phase control method in PTS scheme. This method can solve the computational complexity and guarantee to reduce PAPR. We analyzed the performance of the PAPR reduction when we applied the proposed method to telecommunication systems.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.979-984
• /
• 2001

As a preceding process for developing design technology and establishing operation technology, the design procedure of the SCR(Selective Catalytic Reduction) pilot plant that can handle $1,000Nm^{3}/hr$ of flue gas was reported in this paper. And we also considered several factors that might cause abnormality of the plant in the designing process. The plant was designed and fabricated to test the $DeNO_{x}$ performances in variable operating conditions in the range of $3,000{\sim}36,000hr^{-1}/hr$ in space velocities, $1.67{\sim}6\;m/s$ in linear velocities, $200{\sim}500^{\circ}C$ temperatures, $300{\sim}1,000Nm^{3}/hr$ flow rates, and $0{\sim}1.4:1\;NH_{3}/NO$ ratios. In order to maintain the flow uniformity, the guide vanes and flow straightener were designed and constructed in the plant. The SCR pilot plant can be operated by the automatic control system, which enable to obtain performance data in real time and to set up the operating technology. The catalyst reactor consists of 4 catalyst layers and surface area of each layer can be adjusted to be of small size. Arrangement of catalysts per layer is $3{\times}6$ with the catalyst dimensions of $150{\times}150{\times}500mm(L{\times}W{\times}H)$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.9
• /
• pp.27-34
• /
• 2011

Cognitive Radio, which is proposed to improve the efficiency of wireless communication systems is the system to share primary user's frequency bands with a secondary user. In this situation, a secondary user uses NC-OFDM (Non-contiguous Orthogonal Frequency Division Multiplexing) to transmit data effectively without interfering with the primary user's spectrum. However, NC-OFDM, in common with contiguous OFDM, degrades the performance of the system by generating high PAPR (Peak-to-Average Power Ratio). In this paper, firstly, we analyse PAPR corresponding to the distribution of subcarriers in NC-OFDM. Then the PAPR reductions that employ the PTS (Partial Transmit Sequence) and SLM (Selective Mapping) are evaluated. Finally, the computational complexities of the PTS and SLM adopting pruned-FFT are compared with conventional PTS and SLM. Further, it is shown that the NC-OFDM with pruned-FFT is more efficient than the contiguous OFDM in terms of computational complexity and PAPR reduction performance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.965-970
• /
• 2010

Because of a large number of subcarriers, the high PAPR(Peak-to-Average Power Ratio) is the major drawback of NC-OFDM system used for wireless communication system. Comb type pilot assignment is more efficient and lower computational complexity for the channel estimation than the block type pilot. However, even if the CAZAC(Constant Amplitude Zero Autocorrelation) matrix transform is used for the PAPR reduction of the data symbols, PAPR increases when the pilot is inserted in comb type with the data symbols. Therefore, in this paper, we additionally use a new SLM technique in order to lower the PAPR again even in the comb type pilot. Also, a new SLM technique suggested in this paper does not need any additional bandwidth for sending selection information for SLM. This combined method has good PAPR reduction performance and efficient data transmission.