• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.3
• /
• pp.18-31
• /
• 2004

Ecological network can solve the ecological problems such as habitat cutting and fragmentation that are resulted from urbanization. Recently, rooftop biotope construction has been appeared as a usefull method for ecological networking in urban area. The objective of this study is to seek the possibility of rooftop greening introduction as well as to select target species for rooftop greening construction from the urban ecological network point of view. In order to select target species, we monitored two adjacent rooftop greening sites, where we found 22 species of birds and insects and 33 species of plants. We set criteria to select target species through documents research, and gave marks species according to the criteria with the help of specialists. We divided the target species into 5 groups on the basis of the 12 selecting criteria. In those two monitored rooftop greening sites, we did not find any species belong to group A, which is the best target species, but we found species belong to the other groups. Orthetrum albistylum, Sympetrum dawinianum belong to group B, which is the priority target species, 7 species besides Passer montanus, Coccinella axyridis, Agrionidae to group C, which is the possible target species, 6 species besides Atractomorpha lata to group D, which is the potential target species, and the others were found to be inadequate to the target species. We found Orthetrum albistylum, Sympetrum dawi-nianum to be the best appropriate target species in the two sites. According to the result of this study, the method of ecological network construction from the dra-gonfly habitat network point of view through the construction of rooftop habitat is ideal for Orthetrum albistylum, and Sympetrum dawinianum. For successful urban ecological network construction, selection criteria and construction techniqes & methods for rooftop habitat should be developed through future research.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.144-150
• /
• 2009

This study analyzed opinions of specialists checking of industrial environment, analysis of bid guideline to select environment friendly railway corridor and choose weight factors. Thus, 7 major categories were extracted from 20 EIA categories and essential supplement request items for environment friendly railway corridor selection. To select environment friendly railway corridors, many alternatives should be compared and the assessment of each alternative must be carried out on the basis of these 7 categories. To solve this problem, the selected method was AHP which simplifies the complex problems utilizing hierarchy, quantifying qualitative problems through 1:1 comparison, and extracting objective conclusions by maintaining consistency. As a result, a GUI-based program was developed which provides basic values of weighted parameters of each category defined by specialists, and a quantification of detailed assessment guidelines to ensures consistency.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.205-210
• /
• 2001

In this paper, a novel compound mode logic based on the advantage of both CMOS logic and pass-transistor logic(PTL) is proposed. From the experimental results, the power-delay products of the compound mode logic is about 22% lower than that of the conventional CMOS logic, when we design a full adder. With the proposed logic, a high performance 32$\times$32-bit multiplier has been fabricated with 0.6um CMOS technology. It is composed of an improved sign select Booth encoder, an efficient data compressor based on the compound mode logic, and a 64-bit conditional sum adder with separated carry generation block. The Proposed 32$\times$32-bit multiplier is composed of 28,732 transistors with an active area of 1.59$\times$1.68 mm2 except for the testing circuits. From the measured results, the multiplication time of the 32$\times$32-bit multiplier is 9.8㎱ at a 3.3V power supply, and it consumes about 186㎽ at 100MHz.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.3
• /
• pp.107-116
• /
• 2020

In this paper, the displacement response to seismic loads was analyzed after installing TMD in spatial structures and high-rise buildings. In the case of a spatial structures, since it exhibits complex dynamic behavior under the influence of various vibration modes, it is not possible to effectively control the seismic response by installing only one TMD, unlike ordinary structures. Therefore, after installing eight TMDs in the structure, the correlation between displacement response and mass ratio was examined while changing the mass. The TMD must be designed to have the same frequency as the structure frequency so that the maximum response reduction effect can be exhibited. It can be confirmed that the most important variable is to select the optimal TMD mass in order to install the TMD on the structure and secure excellent control performance against the earthquake load. As a result of analyzing the TMD mass ratio, in the case of high-rise buildings, a mass ratio of 0.4% to 0.6% is preferable. In spatial structures, it is desirable to select a mass ratio of 0.1% to 0.2%. Because this study is based on the theoretical study based on numerical analysis, in order to design a TMD for a real structure, it is necessary to select within a range that does not affect the safety of the structure.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.63-69
• /
• 2012

Given art gallery P with n vertices, the maximum (sufficient) number of mobile guards is${\lfloor}n/4{\rfloor}$ for simple polygon and${\lfloor}(3n+4)/16{\rfloor}$ for simple orthogonal polygon. However, there is no polynomial time algorithm for minimum number of mobile guards. This paper suggests polynomial time algorithm for the minimum number of mobile guards. Firstly, we obtain the visibility graph which is connected all edges if two vertices can be visible each other. Secondly, we select vertex u with ${\Delta}(G)$ and v with ${\Delta}(G)$ in $N_G(u)$ and delete visible edges from u,v and incident edges. Thirdly, we select $w_i$ in partial graphs and select edges that is the position of mobile guards. This algorithm applies various art galley problems with simple polygons and orthogonal polygons art gallery. As a results, the running time of proposed algorithm is linear time complexity and can be obtain the minimum number of mobile guards.

• Journal of Communications and Networks
• /
• v.14 no.4
• /
• pp.434-442
• /
• 2012

Several gateway selection schemes have been proposed that select gateway nodes based on a single Quality of Service (QoS) path parameter, for instance path availability period, link capacity or end-to-end delay, etc. or on multiple non-QoS parameters, for instance the combination of gateway node speed, residual energy, and number of hops, for Mobile Ad hoc NETworks (MANETs). Each scheme just focuses on the ment of improve only a single network performance, i.e., network throughput, packet delivery ratio, end-to-end delay, or packet drop ratio. However, none of these schemes improves the overall network performance because they focus on a single QoS path parameter or on set of non-QoS parameters. To improve the overall network performance, it is necessary to select a gateway with stable path, a path with themaximum residual load capacity and the minimum latency. In this paper, we propose a gateway selection scheme that considers multiple QoS path parameters such as path availability period, available capacity and latency, to select a potential gateway node. We improve the path availability computation accuracy, we introduce a feedback system to updated path dynamics to the traffic source node and we propose an efficient method to propagate QoS parameters in our scheme. Computer simulations show that our gateway selection scheme improves throughput and packet delivery ratio with less per node energy consumption. It also improves the end-to-end delay compared to single QoS path parameter gateway selection schemes. In addition, we simulate the proposed scheme by considering weighting factors to gateway selection parameters and results show that the weighting factors improve the throughput and end-to-end delay compared to the conventional schemes.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.7-12
• /
• 2003

When the wind turbine is used in cold regions, the mechanical properties and dimension stability of the blade will be changed. The proposal of this paper is to test the durability of the blade for wind turbine. It is necessary to select the most comfortable materials and fabrication processes for more stable wind turbine blade in cold regions. To select the most comfortable materials and processes, the static strength has to know through the tensile static tests at the severe condition as cold regions. First, the tensile static specimens made by RIM (Resin injection molding) process & vacuum bagging process with reinforcement materials and resin. Tensile static tests were carried out on three laminate lay-ups (carbon prepreg, carbon fiber dry fabric and glass fiber dry fabric) at different test temperature($24^{\circ}$, $-30^{\circ}$), determining properties such as the mechanical strength, stiffness and strain to failure. At different test temperature, in order to test the tensile strengths of these specimens used the low temperature chamber. Next, the results of this test were compared with each other. Finally, the most comfortable materials and fabrication processes can select based on these results. The results show the changes in the static behavior of three laminate lay-ups at different test temperatures. At low temperatures, the static strengths are higher than the ones at room temperature.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1149-1161
• /
• 2010

This study identifies the dimensions of cosmetics consumption values and the differences in cosmetics brand selection through a cosmetics consumption value group and by product type. The subjects of the study were females over age 20 living in Seoul and Gyeonggi Province between January and February 2008; 427 questionnaires were used for analysis. For data analysis the SPSS 17.0 statistical program was used, and principal component analysis, factor analysis using Varimax rotation, Cronbach's ${\alpha}$ reliability testing, cluster analysis, ANOVA test, and Duncan test were conducted. The results and conclusions of this study are as follows. The dimensions of cosmetics consumption values were found to be the pleasure value, the fashion value, the function value, the brand ostentation value, and the appearance ostentation value. Five types of groups by factor were identified: the group seeking function, the group seeking fashion and brand ostentation, the group seeking pleasure, the group seeking appearance and brand ostentation, and the indifferent group. Second, The group attaching importance to functionality was more likely to select high-priced brands while the group attaching importance to brand awareness were more likely to seek foreign brands, irrespective of product type. As far as base and color cosmetics are concerned, the group attaching importance to pleasure was more likely to select low, medium, and high priced foreign brands, as well as low and medium priced domestic brands. As for body products, the group attaching importance to fashion and brand awareness tended to select low, medium, and high priced domestic brands, as well as high priced foreign brands. By simultaneously purchasing high, medium, and low priced brands, these groups display an ambivalent consumption pattern. This study identified the differing dimensions around cosmetics consumption values and cosmetic brand selection. The research findings helps cosmetic companies set product prices and contributes to cosmetic marketing strategies.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.1-9
• /
• 2014

To develop a coalbed methane(CBM) reservoir, it is important to apply production methods such as drilling, completion, and stimulation which coincide with coal properties. However, the reliability of the selected resulted in most of CBM field is not enough to accept because the selection of production method has been done by empirical decision. As the result, the empirical decision show inaccurate results and need to prove using simulation whether it was true exactly. In this study, the intelligent system has been developed to assist the selection of CBM production method using artificial neural network(ANN). Before the development of the system, technical screening guideline was analyzed by literature survey and the system to select drilling and completion method, and hydraulic fracture fluid was developed by utilizing the guideline. The result as a validation of the developed system showed a high accuracy. In conclusion, it has been confirmed that the developed system can be utilized as a effective tool to select production method in CBM reservoir.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.04a
• /
• pp.196-201
• /
• 2003

When the structures are used in cold regions, the mechanical properties and dimension stability of the blade will be changed. The proposal of this study is to test the durability of the structures in cold regions. It is necessary to select the most comfortable materials and fabrication processes for more stable structures in cold regions. To select the most comfortable materials and processes, the static strength has to know through the tensile static tests at the severe condition as cold regions. First, the tensile static specimens made by RIM (Resin injection molding) process & vacuum bagging process with reinforcement materials and resin. Tensile static tests were carried out on three laminate lay-ups (carbon prepreg, carbon fiber dry fabric) at different test temperature($24^{\circ}C$, $-30^{\circ}C$), determining properties such as the mechanical strength, stiffness and strain to failure. At different test temperature, in order to test the tensile strengths of these specimens used the low temperature chamber. Next, the results of this test were compared with each other. Finally, the most comfortable materials and fabrication processes can select based on these results. The results show the changes in the static behavior of three laminate lay-ups at different test temperatures. At low temperatures, the static strengths are higher than the ones at room temperature.