• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.9-18
• /
• 2005

This paper proposes the novel synchronous segmented bus architecture that has the pipeline bus architecture based on OCP(open core protocol) and the memory-oriented bus for MPEG system. The proposed architecture has bus architectures that support the memory interface for image data processing of MPEG system. Also it has the segmented hi-directional multiple bus architecture for multitasking processing by using multi -masters/multi - slave. In the scheme address of masters and slaves are fixed so that they are arranged for the location of IP cores according to operational characteristics of the system for efficient data processing. Also the bus architecture adopts synchronous segmented bus architecture for reuse of IP's and architecture or developed chips. This feature is suitable to the high performance and low power multimedia SoC systum by inherent characteristics of multitasking operation and segmented bus. Proposed bus architecture can have up to 3.7 times improvement in the effective bandwidth md up to 4 times reduction in the communication latency.

• Journal of Digital Contents Society
• /
• v.18 no.3
• /
• pp.613-619
• /
• 2017

This paper presents a CUDA (Compute Unified Device Architecture) code to achieve correct GPU parallel segmented prefix operation results with less than 32 segment length for large data arrays. Mark Harris and Michael Garland had published CUDA code to address the tasks. This paper shows that their code does not generate correct results when the local segment length is less than 32, discusses the cause of the problem, and presents a CUDA code that generates correct results. The segmented parallel prefix operation presented in this paper can be applied as a building block to various large parallel processing algorithms including the k-nearest neighbor search problems.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.6
• /
• pp.979-994
• /
• 2015

The mode shapes of a segmented hull model towed in a model basin were predicted using both the Proper Orthogonal Decomposition (POD) and cross random decrement technique. The proper orthogonal decomposition, which is also known as Karhunen-Loeve decomposition, is an emerging technology as a useful signal processing technique in structural dynamics. The technique is based on the fact that the eigenvectors of a spatial coherence matrix become the mode shapes of the system under free and randomly excited forced vibration conditions. Taking advantage of the simplicity of POD, efforts have been made to reveal the mode shapes of vibrating flexible hull under random wave excitation. First, the segmented hull model of a 400 K ore carrier with 3 flexible connections was towed in a model basin under different sea states and the time histories of the vertical bending moment at three different locations were measured. The measured response time histories were processed using the proper orthogonal decomposition, eventually to obtain both the first and second vertical vibration modes of the flexible hull. A comparison of the obtained mode shapes with those obtained using the cross random decrement technique showed excellent correspondence between the two results.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.24 no.1
• /
• pp.51-58
• /
• 2014

A LFSR is commonly used for various stream cryptography applications to generate random numbers. A Leap-ahead LFSR was presented to generate a multi-bits random number per cycle. It only requires a single LFSR and it has an advantages in hardware complexity. However, it suffers from the significant reduction of maximum period of the generated random numbers. This paper presents the new segmented Leap-ahead LFSR to solve this problem. It consists of two segmented LFSRs. We prove the efficiency of the proposed segmented architecture using the precise mathematical analysis. We also demonstrate the proposed comparison results with other counterparts using Xinilx Vertex5 FPGA. The proposed architecture can increase 2.5 times of the maximum period of generated random numbers compared to the typical Leap-ahead architecture.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.409-421
• /
• 2019

Investigation of hydroelastic responses of high-speed vessels in irregular sea state is of major interest in naval applications. A three dimensional nonlinear time-domain hydroelastic method in oblique irregular waves is developed, in which the nonlinear hydrostatic restoring force caused by instantaneous wetted surface and slamming force are considered. In order to solve the two technical problems caused by irregular sea state, the time-domain retardation function and Proportional, Integral and Derivative (PID) autopilot model are applied respectively. Besides, segmented model tests of a high-speed trimaran in oblique waves are performed. An oblique wave testing system for trimarans is designed and assembled. The measured results of main hull and cross-decks are analyzed, and the differences in distribution of load responses between trimarans and monohull ships are discussed. Finally, from the comparisons, it is confirmed that the present concept for dealing with nonlinear hydroelastic responses of ships in oblique irregular waves is reliable and accurate.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.6_2
• /
• pp.1103-1110
• /
• 2020

In this study, a segmented model with Upside-Down bathtub shaped failure intensity for a repairable system are proposed under the assumption that the occurrences of the failures of a repairable system follow the Non-Homogeneous Poisson Process. The proposed segmented model is the compound model of S-PLP and LIP (Segmented Power Law Process and Logistic Intensity Process), that fits the separate failure intensity functions on each segment of time interval. The maximum likelihood estimation is used for estimating the parameters of the S-PLP and LIP model. The case study of system A shows that the S-PLP and LIP model fits better than the other models when compared by AICc (Akaike Information Criterion corrected) and MSE (Mean Squared Error). And it also implies that the S-PLP and LIP model can be useful for explaining the failure intensities of similar systems.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.2
• /
• pp.44-48
• /
• 2009

A simulation study of a 10-bit two-stage DAC was done by using a conventional current switch cell. The DAC adopts the segmented architecture in order to reduce the circuit complexity and the die area. The 10-bit CMOS DAC was designed in 2 blocks, a unary cell matrix for 6 MSBs and a binary weighted array for 4 LSBs, for fabrication in a 0.35-${\mu}m$ CMOS process. To cancel the accumulation of errors in each current cell, a symmetrical switching sequence is applied in the unary cell matrix for 6 MSBs. To ensure high-speed operation, a decoding circuit with one stage latch and a cascode current source were developed. Simulations show that the maximum power consumption of the 10-bit DAC is 74 mW with a sampling frequency of 100 MHz.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.19 no.3
• /
• pp.128-143
• /
• 1991

To understand and predict destination choice behavior for urban parks, two hypotheses, which are based on extended Fishbein model, were proposed and tested in Kwangju. Data was analyzed by the citizens of Kwangju and by target markets segmented by demographic variables. Analysis by the citizens of Kwangju showed that postulated hypotheses are true. However, they were partially thru in the other cases : it was a general tendency that suggested model applied well in the high-involvement product. Among the demographic variables, sex was the most useful to understand park choice behavior. Park management directions were suggested, and several future research implications were discussed.

• Archives of Reconstructive Microsurgery
• /
• v.16 no.2
• /
• pp.125-132
• /
• 2007

Introduction: Ulna is nearly equal to radius in function and bony architecture and strength in forearm. But in lower extremity, fibula is 1/5 of tibia in anatomic and functional point so we can find fibula transposition is commonly used in defect of tibia. We cannot find other article about segmental forearm bone transposition in man. The purpose of this study was to report our clinical and functional result of undergoing segmented transposition of ipsilateral ulna with its own vascular supply in defect of radius in 6 cases. Material and method: From June 1994 to October 2007, 7 segmented bone transpositional grafts in forearm were performed in Kyung Hee Medical Center. The distribution of age was from 20 years old to 73 years old. There was male in 6 cases and female in 1 case. The causes of operation were giant cell tumor in 1 case and traumatic origin in 6 cases; it was nonunion in 2 cases and fracture with severe comminution in 4 cases. Ipsilaterally segmented ulna keeping its own vascular supply was transported to defect of radius in severe traumatic patients and one patient whose tumor in radius had been excised. Transported ulna was fixed to proximal and distal radius remnants by plate and screw. In one case with giant cell tumor, transported ulna was connected to radius across wrist joint as wrist joint fusion. Joint preserving procedures were performed in 6 cases with crushing injury of radius. Results: We could obtain solid bony union in all cases and good functional results. The disadvantage was relative shortening of forearm, but we could overcome this problem. Conclusion: We think that ipsilateral segmented ulna transposition keeping its own vascular supply to radius can be perfomed with one of procedures in cases with wide defect in radius.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.6
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.