• 대한물리의학회지
• /
• 제8권3호
• /
• pp.417-424
• /
• 2013

PURPOSE: We investigated the relationship between the segment of erector spinae during a core stability exercise according to visual control. METHODS: The subjects of this study were 20 healthy students. An 8-channel electromyograph was used to measure muscle activities of the erector spinae by segment(cervical, thoracic and lumbar) during a core stability exercise according to visual control. The collected data were analyzed using the independent t-test and Pearson-test. RESULTS: The activity of the erector spinae for all segment was higher without the vision than with. The activity of right cervical erector spinae was significantly increased by increasing the activity of the left thoracic erector spinae during a core stability exercise with vision (r= .555). The activity of left thoracic erector spinae was significantly increased by increasing the activity of the left lumbar erector spinae during a core stability exercise without vision (r= .472). CONCLUSION: There was a positive correlation between the cervical and thoracic segment of erector spinae during a core stability exercise with vision. There was a positive correlation between the thoracic and lumbar segment of erector spinae during a core stability exercise without vision.

• Journal of Electrical Engineering and Technology
• /
• 제1권1호
• /
• pp.58-62
• /
• 2006

We proposed a novel segment type switched reluctance motor (SRM) in which the segment core was embedded in aluminum (conductive metal) rotor block in order to increase the mechanical strength and easy manufacturing as well as to improve the performance characteristics and reduce the vibration and acoustic noise. This paper explains the operation principle and the drive system and shows the experimental results in comparison with the VR type SRM.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권4호
• /
• pp.514-523
• /
• 2017

In this paper, we propose Adaptive Writeback-aware Cache management (AWC) to prolong the lifetime of non-volatile main memory systems by reducing the number of writebacks. The last-level cache in AWC is partitioned into Least Recently Used (LRU) segment and LRU using Dirty block Precedence (DP-LRU) segment. The DP-LRU segment evicts clean blocks first for giving reuse opportunity to dirty blocks. AWC can also determine the efficient size of DP-LRU segment for reducing the number of writebacks according to memory access patterns of programs. In the performance evaluation, we showed that AWC reduced the number of writebacks up to 29% and 46%, and saved the energy of a main memory system up to 23% and 49% in a single-core and multi-core, respectively. AWC also reduced the runtime by 1.5% and 3.2% on average compared to previous cache managements for non-volatile main memory systems, in a single-core and a multi-core, respectively.

• 한국운동역학회지
• /
• 제28권4호
• /
• pp.213-218
• /
• 2018

Objective: The purpose of this study was to examine the effect of the core muscle strength enhancement of the elderly on 8 weeks training using the core exercise equipment for the elderly on the ability to control the whole-body center of mass in posture stabilization. Method: 16 females (10 exercise group, 6 control group) participated in this study. Exercise group took part in the core strength training program for 8 weeks with total of 16 repetitions (2 repetitions per week) using a training device. External perturbation during standing as pulling force applied at the pelvic level in the anterior direction was provided to the subject. In a UCM model, the controller selects within the space of elemental variables a subspace (a manifold, UCM) corresponding to a value of a performance variable that needs to be stabilized. In the present study, we were interested in how movements of the individual segment center of mass (elemental variables) affect the whole-body center of mass (the performance variable) during balance control. Results: At the variance of task-irrelevant space, there was significant $test^*$ group interactions ($F_{1,16}=7.482$, p<.05). However, there were no significant main effect of the test ($F_{1,16}=.899$, p>.05) and group ($F_{1,16}=1.039$, p>.05). At the variance of task-relevant space, there was significant $test^*$ group interactions ($F_{1,16}=7.382$, p<.05). However, there were no significant main effect of the test ($F_{1,16}=.754$, p>.05) and group ($F_{1,16}=1.106$, p>.05). Conclusion: The results of this study showed that the 8 weeks training through the core training equipment for the elderly showed a significant decrease in the $Vcm_{TIR}$ and $Vcm_{TR}$. This result indicates that the core strength training affects the trunk stiffness control strategy to maintain balance in the standing position by minimizing total variability of individual segment CMs.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.715-728
• /
• 2022

A new type of buckling-restrained braces (BRBs) with a longitudinally profiled steel plate working as the core (LPBRB) is proposed and experimentally investigated. Different from conventional BRBs with a constant thickness core, both stiffness and strength of the longitudinally profiled steel core along its longitudinal direction can change through itself variable thickness, thus the construction of LPBRB saves material and reduces the processing cost. Four full-scale component tests were conducted under quasi-static cyclic loading to evaluate the seismic performance of LPBRB. Three stiffening methods were used to improve the fatigue performance of LPBRBs, which were bolt-assembled T-shaped stiffening ribs, partly-welded stiffening ribs and stiffening segment without rib. The experimental results showed LPBRB specimens displayed stable hysteretic behavior and satisfactory seismic property. There was no instability or rupture until the axial ductility ratio achieved 11.0. Failure modes included the out-of-plane buckling of the stiffening part outside the restraining member and core plate fatigue fracture around the longitudinally profiled segment. The effect of the stiffening methods on the fatigue performance is discussed. The critical buckling load of longitudinally profiled segment is derived using Euler theory. The local bulging behavior of the outer steel tube is analyzed with an equivalent beam model. The design recommendations for LPBRB are presented finally.

• 한국정밀공학회지
• /
• 제20권11호
• /
• pp.188-193
• /
• 2003

To predict changes in biomechanical parameters such as intradiscal pressure, and the shock absorbing mechanism in the spinal motion segment under different impact duration/loading rates, a three dimensional L3/L4 motion segment finite element model was modified to incorporate the poroelastic properties of the motion segment. The results were analyzed under variable impact duration for normal and degenerated discs. For short impact duration and a given maximum compressive force, relatively high cancellous pore pressure was generated as compared with a case of long impact duration, although the amount of impulse was increased. In contrast relatively constant pore pressure was generated in the nucleus. Disc degeneration increased pore pressure in the disc and decreased pore pressure in the cancellous core, which is more vulnerable to compressive fracture compared with intact case.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.141-143
• /
• 2004

This paper represents 3D line segment extraction method, which can be used in generating 3D rooftop model. The core of our method is that 3D line segment is extracted by using line fitting of elevation data on 2D line coordinates of ortho-image. In order to use elevations in line fitting, the elevations should be reliable. To measure the reliability of elevation, in this paper, we employed the concept of self-consistency. We carry out the experiment of 3D line extraction using synthetic images generated from Avenches data set of Ascona aerial images.

• 한국해양공학회지
• /
• 제34권2호
• /
• pp.89-96
• /
• 2020

In this study, the Norbury-Fraenkel family of vortex rings is analyzed using a contour dynamics method for the stream function, which significantly reduces the numerical burden in the calculation. The stream function is formulated as the integral along the contour of the vorticity core. The integration over the logarithmic-singular segment is evaluated analytically, and the positions of the nodal points of the contour are calculated directly. The shapes of the cores and the dividing stream surfaces are found based on the mean core radius. Compared with other studies, the proposed method is verified and found to be more efficient.

• 한국해양공학회지
• /
• 제36권2호
• /
• pp.108-114
• /
• 2022

Most studies on the shape of the steady vortex ring have been based on the Stokes stream function approach. In this study, the velocity approach is introduced as a trial approach. A contour dynamics method for fluid velocity is used to analyze the Norbury-Fraenkel family of vortex rings. Analytic integration is performed over the logarithmic-singular segment. A system of nonlinear equations for the discretized shape of the vortex core is formulated using the material boundary condition of the core. An additional condition for the velocities of the vortical and impulse centers is introduced to complete the system of equations. Numerical solutions are successfully obtained for the system of nonlinear equations using the iterative scheme. Specifically, the evaluation of the kinetic energy in terms of line integrals is examined closely. The results of the proposed method are compared with those of the stream function approaches. The results show good agreement, and thereby, confirm the validity of the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권4호
• /
• pp.1095-1109
• /
• 2022

Along with the popularity of GPS system and smart cell phone, trajectories of pedestrians or vehicles are recorded at any time. The great amount of works had been carried out in order to discover traffic paradigms or other regular patterns buried in the huge trajectory dataset. The core of the mining algorithm is how to evaluate the similarity, that is, the "distance", between trajectories appropriately, then the mining results will be accordance to the reality. Euclidean distance is commonly used in the lots of existed algorithms to measure the similarity, however, the trend of trajectories is usually ignored during the measurement. In this paper, a novel segment transform distance (STD) algorithm is proposed, in which a rule system of line segment transformation is established. The similarity of two-line segments is quantified by the cost of line segment transformation. Further, an improvement of STD, named ST-DTW, is advanced with the use of the traditional method dynamic time warping algorithm (DTW), accelerating the speed of calculating STD. The experimental results show that the error rate of ST-DTW algorithm is 53.97%, which is lower than that of the LCSS algorithm. Besides, all the weights of factors could be adjusted dynamically, making the algorithm suitable for various kinds of applications.