• International Journal of Quality Innovation
• /
• v.2 no.2
• /
• pp.69-92
• /
• 2001

The laser-assisted seeding (LAS) process has potential to replace conventional electroless copper plating in Printed Circuit Board (PCB) manufacturing since it combines the steps of laser drilling and plating into one single process. In the LAS process, the single extra LAS step can metallize a microvia. Thus, the process steps can be greatly reduced and the productivity enhanced, but also the high aspect ratio microvias can be metallized. The objectives of this paper are to study the LAS copper thickness within PCB microvias and the thermal reliability of the microvias produced by this process. It was found that results were satisfactory in both the reliability test and also the LAS copper thickness which both comply with IPC standard, the copper thickness produced by the LAS process is sufficient for subsequent electro-plating process. The reliability of the microvias produced by LAS process is acceptable which are free from any voids, corner cracks, and distortion in the plated copper.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.3
• /
• pp.12-18
• /
• 2022

In recent years, the impact of microplastics (MPs) on ecosystems is a serious problem. Since MPs are difficult to recover once they are dispersed into the environment, it is important to remove them at the source. We proposed a magnetic separation of primary MPs (plastics manufactured in minute sizes) sized 10-100 ㎛ that has not been removed in the sewage process, based on the magnetic seeding process. In this study, we used magnetite as a magnetic seeding agent, and conducted magnetic separation experiments in the continuous process using a superconducting solenoidal magnet to investigate the feasibility of practical magnetic separation system of MPs. As a result, 85% separation rate was obtained by continuous separation using high gradient magnetic separation (HGMS) with hydrophobically treated magnetite as a magnetic seeding agent.

• Journal of the Korean Ceramic Society
• /
• v.24 no.5
• /
• pp.447-452
• /
• 1987

${\alpha}$-Al2O3 powder was produced at 1000$^{\circ}C$ by the boehmite sol-gel process with seeding 2 wt% ${\alpha}$-Al2O3. The processes and mechanisms of fornation of ${\alpha}$-Al2O3 was investigated using DTA/TG, XRD, TR spectroscopy and thermodynamic analysis. The specific surface area of the obtained ${\alpha}$-Al2O3 was 16.3㎡/g.

• Journal of Biosystems Engineering
• /
• v.42 no.3
• /
• pp.147-154
• /
• 2017

Purpose: To reduce the costs of potato seeds and labor of workers, a fully automatic in-situ seeding machine for cutting seed potatoes was developed. Methods: An experiment was conducted to evaluate the seeder performance of the prototype of potato planter by cutting seeds in farmlands from March to April 2017. The study tested the seeder performance at working speeds ranging from 0.28 to 0.45 m/s. The seeding rate and seeding distance were also investigated according to the planned distance between planted seeds from 20 to 30 cm, with 5 cm intervals. Results: Tests on the performance of the developed cutting blade on the automatic potato seeder show that whole potatoes should be used instead of half potatoes. The seeding rates were 88.8% and 82.5% for whole and half potatoes, respectively. When the tractor working speed was increased from 0.28 to 0.45 m/s, the successful seeding rate decreased from 98.8% to 96.3%, respectively. However, with planted seed distances of 20, 25, and 30 cm, the successful seeding rates were near 98%. Conclusions: The developed automatic potato seeder can to improve the labor productivity and cultivation environment of potato farms by the mechanization of the seeding process, which is currently associated with high-labor, -costs, and -hours. Therefore, based on this study, the developed automatic potato seeder provides the mechanization necessary for improved potato cultivation conditions in farmlands.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1128-1135
• /
• 2001

In this paper, a new HSG-Si formation technology, "seeding method', which employs Si$_2$H$_{6}$-molecule irradiation and annealing, was applied for realizing 64Mbit DRAMs. By using this technique, grain size controlled HSG-Si can be fabricated on in-situ phosphorous-doped amorphous-Si electrode. The new HSG-Si fabrication technology achieves twice the storage capacitance with high reliability for the stacked capacitors. In this technique, optimum process conditions of the phosphorous concentration, storage polysilicon deposition temperature and thickness of hemispherical grain silicon are in the range of 3.0-4.0E19atoms/㎤, 53$0^{\circ}C$ and 400$\AA$, respectively. In the 64M bit DRAM capacitor using optimum process conditions, limit thickness of dielectric nitride is about 65$\AA$.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.37-42
• /
• 1976

In this study, an effort was made to find out more effective methods for vegetation establishment on denuded forest land along Cheon Bo Mountains, This area has serious sheet erosion as a major erosion process and parent material is granite gneiss which is known as one of the most erosive materials. Lespedeza bicolor, Arundinella hirta and Robinia pseudoacacia were used as ground cover species. Seeding methods were open broadcast seeding and broadcast seeding with straw mulch, dill seeding with 10cm and 20cm width, and spot seeding with 20cm and 30cm diameter. 1. On slopes less than 30 degrees, broadcast seeding method with straw mulch was the most effective way to establish vegetation cover. 2. On steep slopes more than 30 degrees, 10cm drill seeding method was more effective than the other methods. 3. Soil Texture has an influence on vegetation establishment governing soil moisture condition. Coverage and fresh weight were increased with the fine material qantity in soil. 4. In process of year, coverage was increased with fresh weight. On the other hand, survival decreased.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.384-387
• /
• 1999

A new multi-seeding process for the growth of YBa$_2Cu_3O_x$ single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. There was significant improvement in trapped magnetic field over the conventional multi-seeding process, which is believed to be due to complete elimination of liquid phase between crystals.

• Korean Journal of Organic Agriculture
• /
• v.30 no.3
• /
• pp.351-374
• /
• 2022

In recent years, the development of rice industry has been highly valued by the state. In hubei area, due to the development of the modernization and the shortage of labor, traditional way of rice cultivation methods is facing serious challenges, and economic benefits have become the decisive factor for the effective promotion and application of rice cultivation methods. According to the research results, first, in the input-side analysis, in the CCR model, D5, D12, D26, D28, D32, D36 farmers with high efficiency appear. The analysis result shows that among the 60 farmers, the average efficiency is 89%, and there is an inefficiency of 11%. In the BCC model, 14 farmers were identified as high-efficiency farmers, with an average efficiency of 0.9453. Second, in direct seeding cultivation of rice, the average scale efficiency is 0.9227, while the average pure technical efficiency is 0.9644. This shows that the effect of scale efficiency is greater than that of purely technical factors, ignoring the reasons for the low operational efficiency of direct seeding cultivation farmers. It can be predicted that with the further deepening of farmers' understanding of this planting mode, the proportion of rice direct seeding may be further expanded in the future. Relevant agricultural departments should further promote this technology to farmers, study the direct seeding technology using scientific methods, and evaluate the changes of this cultivation mode. The agricultural departments of government should concern about the climate risk assessment of direct seeding rice, the environmental impact assessment caused by the extensive use of herbicides, the application of mechanical technology in the process of direct seeding, the lodging of direct seeding rice, and other related issues.

• Korean Journal of Veterinary Service
• /
• v.18 no.3
• /
• pp.1-12
• /
• 1995

To investigate effect of seeding on post-thaw motility and viability of canine spermatozoa, the semen from male dogs which had been proved to be fertile in the past were frozen and seeded during freezing process. Post-thaw motility and viability of canine sperm which were frozen and seeded were investigated according to different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$, or $-l5^{\circ}C$ and also according to different concentration of glycerol of 2%, 5% and 10%. In addition, post-thaw motility of canine sperm frozen by direct freezing in a deep freezer or programmed freezing in a programmed cell freezer was investigated. Post-thaw motility of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}C$ showed considerably higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, respectively, in 2% and 5% glycerol groups on both 2 and 7day after freezing(p<0.05). In 10% concentration of glycerol, the sperm seeded at each seeding temperature showed considerably higher post-thaw motility than that of non-seeding group on day 7 after freezing(p<0.01). Post-thaw viability of canine sperm was compared according to different seeding temperatures : The sperm seeded at $-5^{\circ}$ showed significantly higher post-thaw motility than that of non-seeding, and that seeded at $-10^{\circ}C$, or $-l5^{\circ}C$, in 5% and 10% glycerol groups on day 7 after freezing(p< 0.05). In comparison of post-thaw motility of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed considerably higher post-thaw motility than 2% glycerol group without difference between those two groups in all seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$) on day 2 and 7 after freezing(p<0.01). In comparison of post-thaw viability of canine sperm seeded according to different concentration of glycerol, 5% glycerol group and 10% glycerol group showed the same considerably higher post-thaw viability than 2% glycerol group on each thawing day(p<0.01). The canine sperm frozen and seeded by programmed freezing method showed considerably higher post-thaw motility than that frozen by direct freezing method in all different seeding temperatures($-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}$). These results indicated that the higher post-thaw motility and viability was obtained in the spermatozoa seeded than that of non-seeding, that among different seeding temperatures of $-5^{\circ}C$, $-10^{\circ}C$ and $-l5^{\circ}C$, the sperm seeded at $-5^{\circ}C$ showed higher post-thaw motility and viability than the other temperatures, also among different concentrations fof glycerol of 2%, 5% and 10%, the sperm frozen and seeded in 5% and 10% concentration of glycerol showed higher post-thaw motility and viability than that in 2% of glycerol, and that the sperm frozen and seeded by programmed freezing method showed higher motility than that by direct freezing method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.251-254
• /
• 1999

A new multi-seeding process for the growth of YBa$_2$Cu$_3$Oxx single crystals was developed. This process introduces an additional heating step to peritectic temperature and a subsequent slow cooling step to the growth temperature following the point when the crystals contacted. The crystal growth was resumed thereafter. The results obtained with this new process were compared with those of the conventional growth process, in which materials were only kept at the growth temperature. It was observed that the liquid phase between crystals were almost completely eliminated, but that Y2ll grains were grown during this new process. There was no significant improvement in trapped magnetic field over the conventional process, which is believed to be due to the cracks generated during the oxygen heat treatment or to the growth of YBa$_2$Cu$_3$Ox grains.