• 제목/요약/키워드: Seeding density

검색결과 146건 처리시간 0.038초

플라스틱 시트 위에 재배한 켄터키 블루그래스(Poa pratensis) 카펫형 뗏장의 배양토 및 파종량 (Soil Media and Seeding Rates for the Establishment of Kentucky bluegrass Carpet-type Sod over a Plastic Sheet)

  • 심상렬;정대영
    • 한국환경복원기술학회지
    • /
    • 제2권1호
    • /
    • pp.20-28
    • /
    • 1999
  • 켄터키 블루그래스를 잔디뗏장으로 생산하기 위한 실험에서 토양의 조성과 파종량을 달리하여 분석된 생육특성과 뗏장형성에 미치는 영향의 결과는 다음과 같다. 1. 토양의 물리화학성이 좋은 토탄, 바크 및 버미큘라이트를 배양토로 한 처리구에서의 생육특성이 우수한 것으로 나타났다. 특히 토탄은 5차례의 피복율 측정에서 가장 높은 것으로 조사되었다. 2. 모래를 주재료로한 처리구와 사양토, 모래, 펄라이트 및 피트모스에서는 피복율을 비롯한 다른 생육특성에서도 매우 낮은 결과를 보여 켄터키 블루그래스의 뗏장생산을 위한 배양토로는 부적합할 것으로 판단된다. 특히 피트모스는 토양의 물리성중 투수율이 좋지 않아 수분의 침투가 어려우며 pH 3.9의 강산성으로 원할한 식물 생장이 어렵다고 보여진다. 3. 표면경도와 인장강도의 측정결과 피복율도 좋고 생육이 활발하여 뿌리조직이 잘 발달된 토탄, 바크 및 버미큘라이트에서 우세하였다. 4. 파종량을 달리하여 생육특성을 파악한 실험에서는 파종량이 가장 많았던 $15g/m^2$에서 높았고 기간이 지날수록 $5g/m^2$, $10g/m^2$의 처리구도 $15g/m^2$와 비슷한 수준을 보였으나 적당한 밀도를 유지하고 개체간의 경쟁이 없었다고 보여지는 $10g/m^2$이 적정 파종량인 것으로 나타났다. 5. 뗏장의 형성은 토탄, 바크 및 버미큘라이트에서 우수한 것으로 나타났다. 특히 토탄은 파종후 약 2개월이 경과한 대부분의 처리구에서 뗏장이 형성되었다. 6. 본 실험의 결과 파종량보다는 배양토의 조건에 따라 켄터키 블루그래스의 생육 상태 및 뗏장의 형성이 더 큰 영향을 받은 것으로 나타났다.

  • PDF

벼 무경운 직파 논에서 뚝새풀 발생밀도에 따른 잡초 발생 (Weed Occurrence According to the Density of Water Foxtail in No-tillage Seeding Rice Paddy Fields)

  • 성기영;박태선;조현숙;서명철;전원태
    • 한국잡초학회지
    • /
    • 제32권3호
    • /
    • pp.280-284
    • /
    • 2012
  • 벼 무경운 직파 재배는 노동력을 절감하고 쟁기 및 로타리 경운을 생략함으로서 에너지를 절약하는 이점이 있다. 또 토양 및 토양수분을 보전하고 논 표층에 토양유기물을 축적시키는 장점이 있다. 이는 벼 무경운 재배 논에서 동계에 많이 발생하는 뚝새풀로 인함이다. 본 시험에서 벼 무경운 재배를 한 논에서 동계에 뚝새풀이 많이 발생하였는데, 피복정도가 식양질에서 97.6%, 사양질에서 95.2%로 아주 심하게 발생을 하였다. 이로 인해 벼룩나물, 황새냉이, 개갓냉이, 선씀바귀 등 월년생 잡초나 숙근초의 발생이 줄어들었으며, 그리고 봄철 일찍 발생하는 1년생 잡초 좀명아주, 여뀌 뿐 아니라, 관개 후 논에서 발생하는 피, 알방동산이, 물달개비, 밭뚝외풀 등의 1년생 하계 논잡초들의 발생도 줄어들었다. 결론적으로 벼 무경운 직파 시 동계에 발생하는 뚝새풀로 인해 하계 논잡초 발생을 관리할 수 있는 이점도 있는 것이다.

전남지역 왕우렁이(Pomacea canaliculata: Ampullariidae)의 발생생태 및 피해 (Occurrence and Damage of Golden Apple Snail (Pomacea canaliculata : Ampullariidae) in Jeonnam Province of South Korea)

  • 김도익;김선곤;최경주;강범용;박종대;김정준;최동로;박형만
    • 한국응용곤충학회지
    • /
    • 제46권1호
    • /
    • pp.109-115
    • /
    • 2007
  • 전남지역 담수직파재배지에서 발생하여 피해를 주고 있는 왕우렁이의 발생상황, 특성 및 피해를 조사한 결과는 다음과 같다. 왕우렁이는 2003년 10월까지는 밀도가 높았으나 11월부터 밀도가 급격히 떨어져 월동에 들어가기 시작하였으며 4월 중순부터 월동에서 깨어나기 시작하였다. 물이 없는 본답에서는 거의 발견할 수 없었으며 본답에서는 6월부터, 수로에서는 5월부터 밀도가 증가하기 시작하였다. 왕우렁이는 벼유묘 8.4cm의 길이를 섭식하는데 235.2초가 소요되며, 이때 한번 섭식을 하면 벼 유묘 지상부가 2.5cm밖에 남지 않아 회복되지 못하였다. 왕우렁이의 밀도가 높을수록 벼 피해는 컸으며 포트당 20마리인 경우 24시간만에 100%의 섭식률을 보였다. 왕우렁이는 논 중앙보다는 논둑 주변에 더 많이 분포하였으며 산란된 난괴 역시 논둑주변에 더 많았다. 겨울을 난후 개체의 크기는 대부분 소형유체(25mm 이하)였으나 물이 지속적으로 고여 있고 흙이 부드러운 수로의 개체들은 대형이었다. 월동 중인 왕우렁이를 채집하여 양식종과 비교한 결과 유리온실이나 비닐하우스에 보관하여도 바로 섭식하지 않았으며 생존율도 양식종보다 낮았다. 온도가 급격히 변화하면 왕우렁이는 활동을 정지하고 온도가 상승하면 다시 활동하기 시작하였다. 그러나 $-3^{\circ}C$ 정도까지 내려가면 거의 모든 개체가 생존하지 못하였다. 왕우렁이에 의한 피해는 담수직파시 20%로 높았고, 기계이앙 재배논에서 피해는 낮았으며 피해를 받은 이후 회복되었다. 왕우렁이를 담수직파 벼에 투입하였을때 파종직후에 5.6%의 피해율을 보였으며 늦게 방사할수록 피해율은 적었다.

맥주맥에 있어서 직두형 및 수두형 Isogenic line의 시비량 및 재식밀도에 대한 반응 (Studies on the Response of Isogenic lines of Compact and lax Type to Fertilization and Plant Density in Malting Barley)

  • 조장환;이은섭;채제천
    • 한국작물학회지
    • /
    • 제31권3호
    • /
    • pp.366-374
    • /
    • 1986
  • 1972년 맥주맥 기신 2조 001$\times$Deba abed를 교배하여 Hetero 반복자식법에 의하여 1982년에 만들어진 수두형 및 직두형 동질유전자계통(Isogenic lines)을 이용하여 시비량 3수준(표준비, 질소 30% 증비, 질소 60% 증비), 재식밀도 3수준 (60$\times$18cm, 40$\times$18cm, 20$\times$5cm)으로 처리하고 시비량재식밀도에 따른 수두형 및 직두형계통의 생육, 수량 및 품질차이를 구명하기 위하여 1984년 10월부터 1985년 10월까지 천안에 위치한 단국대학교 농과대학 실험포장에서 시험한 결과는 아래와 같다. 1. 수두형 동질유전자계통은 직두형 동질유전자계통보다 수장과 수축절간장이 길고 입착각도가 크며 1수립수는 계통간에 차이가 없었다. 재식밀도에 따라서 변화가 인정되지 않는 특성은 출수기와 수장이며 재식밀도에 따라 변화되는 유의 2. 수형유전자의 작용을 받지 않은 형질은 출수기, 간장, $m^2$당 수수, 1수립수, 수량, 가변성질소등으로 수형동질유전자계통간에 유의성이 없었고 수형유전자의 작용을 강하게 받는 형질은 주로 품질에 관련되는 형질로서 수장, 천립중, 정립률, 원맥 및 맥아조단백질함량, 맥아수량률, 맥아전질소, 콜박지수, 효소력 등으로 유의성이 있었다. 3. 수두형과 직두형 동질유전자계통이 시비량 차이에 의하여 영향을 받지 않은 형질은 출수기, 간장, 수장, 1수립수, 천립중 등이며 영향을 많이 받는 형질은 $m^2$당수수, 수량, 정립률, 원맥 및 맥아조단백질함량, 맥아수량률, Extract 수량률, 맥아전질소, 가용성질소, 콜박지수, 효소력 등이다. 4. 수두형과 직두형 동질유전자계통이 재식밀도에 의하여 영향을 받지 않은 형질은 출수기, 수장이며 영향을 받는 형질은 간장, $m^2$당수수, 1수립수, 천립중, 1 $\ell$중, 수량, 정립률과 품질관련 형질들이었다. 5. 시비량에 있어서 12-12-9 kg 구가 맥주맥의 품질이 가장 좋으며 수양은 15-12-9kg 가 많았고 재식밀도에 있어서 관행재배보다 협신파재배나 세조파재배를 할수록 다시 말하면 균등배치양식을 할수록 수량이 많아지고 품질이 양호하였다. 6. 수두형이 직두형 동질유전자계통보다 품질관련형질면에서 유리하므로 양질맥주맥 품종육성에 있어서 선발지표로 할 수 있으며 수두형은 직두형보다 간이 연약하여 도복이 우려되므로 선발시 항상 유의해야 한다.

  • PDF

Evaluation of Growth and Yield on Transplanting time and Plant Density in ItalianRyegrass

  • Yun-Ho Lee;Hyeon-Soo Jang;Jeong-Won Kim;Bo-kyeong Kim;Deauk-Kim;Jong-Tak Youn
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.101-101
    • /
    • 2022
  • In recent years, due to climate change, the livestock industry has become more interested in the production of forage crops. In Korea, more than 74% of forage crops are cultivated in winter rice fields. In particular, Italian ryegrass (IRG) is depends on imports for more than 70% of its seeds. In generally, the IRG rapeseed cultivation method involves sowing from early October to mid-October by drill sowing seeding or spot seedling. However, the sowing period is delayed due to frequent rainfall during. And, same period require a lot of seeds. However, raising seedlings and transplanted IRG will overcome weather conditions and reduce the amount of seeds. This study was intended to be applied to the domestic IRG seed industry in the future through growth and quantity evaluation according to transplant time and planting density for the production of good quality IRG seeds in rice paddy fields. In this study, transplanting time (October 20, October 30, November 10) and planting density (50, 70, and 80) were cultivated at the National Institute of Crop Science in 2021. The amount of fertilizer applied was adjusted to (N-P2O5-K2O) 4.5-12-12 (kg/10a), and then 2.2(kg/10a) of nitrogen was added each year. For the growth survey, leaf area, canopy coverage, plant length, and seed yield were investigated. Along with the transplanting time, the plant length was higher on October 20 than on October 30 and November 10. On the other hand, leaf area index changes differed depending on the transplanting time and planting density, and were particularly high on October 20, 80 density and 70 density, but similar on October 30 and November 10. 1000 seed weight showed no difference with transplanting time and planting density. On the other hand, the seed yield was 215(kg/10a) for 80 density on October 20, 211(kg/10a) for 70 density, 118(kg/10a) for 50 density, and 80 density for October 30 and November 10. and 70 density did not differ. On the other hand, the 50 density on October 30 and November 10 were 164(kg/10a) and 147(kg/10a) respectively. As can be seen from this study, the earlier the transplant, the higher the seed yield. However, the 50 density was reduced in yield compared to the 70 density and 80 density.

  • PDF

단결정 YBCO 벌크 초전도체 제조에 대한 액상침투법과 고전적 용융공정의 비교연구 (Comparative Study on the Fabrication of Single Grain YBCO Bulk Superconductors using Liquid Infiltration and Conventional Melt Growth Processes)

  • 아시프 마흐무드;전병혁;김찬중
    • Progress in Superconductivity
    • /
    • 제11권1호
    • /
    • pp.42-46
    • /
    • 2009
  • With an aim of comparison, single grain Y-Ba-Cu-O (YBCO) bulk superconductors were fabricated using a liquid infiltration growth (LIG) process and a conventional melt growth (MTG) process with top seeding. The MTG process uses an $YBa_2Cu_3O_{7-x}$(Y123) powder as a precursor, while the LIG process uses $Y_2BaCuO_5(Y211)/Ba_3Cu_5O_8(Y035)$ pre-forms. The growth of a single Y123 domain on the top seed was successful in the both processes. Different feature between the two processes is the interior microstructure regarding the critical current density ($J_c$). The LIG-processed YBCO sample showed a lower porosity, more uniform distribution of Y211 particles and the enhanced Y211 refinement compared to the conventional MTG process. The $J_c$ improvement in the LIG process is attributed to the dispersion of finer Y211 particles as well as lower porosity within the Y123 superconducting matrix.

  • PDF

기계시각과 DGPS를 이용한 실시간 정밀방제 시스템 개발 (Development of Real-time Precision Spraying System Using Machine Vision and DGPS)

  • 조성인;정재연;김유용;남기찬;이중용
    • Journal of Biosystems Engineering
    • /
    • 제27권2호
    • /
    • pp.143-150
    • /
    • 2002
  • Several researches for site-specific weed control have tried to increase accuracy of weed detection with machine vision technique. However, there is a problem which needs substantial time to perform site-specific spraying. Therefore, new technology for real-time precision spraying system is needed. This research was executed to develope the new technology to estimate weed density and size in real time, and to conduct a real-time site-specific spraying. It would effectively reduce herbicide amounts applied for a crop field. The real-time precision spraying system consisted of a Differential Global Positioning System (DGPS) with an error of 2 cm, a machine vision system, a geomagnetic sensor for correction of view point of CCD camera and an automatic sprayer with separately controlled nozzle. The weed density was calculated with comparison between position information and a pre-designed electronic map. The position information was obtained in real time using the DGPS and the machine vision. The electronic map contained a position database of crops automatically constructed when seeding. The developed system was tested on an experimental field of Seoul National University. Success rate of the spraying was about 61%.

나노다이아몬드 seed 입자의 열처리에 의한 핵형성 밀도 향상 (Enhanced nucleation density by heat treatment of nanodiamond seed particles)

  • 박종천;정옥근;손빛나;조현
    • 한국결정성장학회지
    • /
    • 제23권6호
    • /
    • pp.291-295
    • /
    • 2013
  • 산화 및 수소 분위기 열처리를 통한 화학적 표면 개질로 나노다이아몬드 seed 입자의 응집성 완화 및 초미세나노결정질 다이아몬드 (UNCD) 박막 증착을 위한 핵형성 밀도 향상을 확보하였다. 열처리에 의해 나노다이아몬드 seed 입자표면 작용기가 개질되었고, 제타 전위도 증가하였다. 또한, 응집체 평균 크기가 약 $2{\mu}m$에서 ~55 nm로 크게 감소하였다. $600^{\circ}C$, 수소 열처리된 seed 입자로 seeding 한 Si 기판으로부터 열처리하지 않은 seed 입자에 비해 현저하게 향상된 ${\sim}2.7{\times}10^{11}cm^{-2}$의 매우 높은 핵형성 밀도를 확보하였다.

Vetch Effects for the Low-input No-till Direct-Seeding Rice-Vetch Cropping System

  • Cho, Young Son;Choe, Zhin Ryong
    • 한국작물학회지
    • /
    • 제44권3호
    • /
    • pp.221-224
    • /
    • 1999
  • A field experiment was carried out to observe the weed control effects of vetch and to evaluate vetch characteristics on clay loam soil in no-till direct-sown rice-vetch cropping systems. The effects of weed control, forage productivity, and N content of vetch plants were investigated. With the progress of plant growth, density of Chinese milk vetch (Astragalus sinicus L.) gradually decreased, but densities of foxtail and other weeds decreased steeply due to the depression by the over-shaded vetch canopy in a no-till direct-sown rice-vetch cropping paddy field. The vetch density in tillage systems was lower than in notillage cropping systems. Lower vetch density occurred with an increase in foxtail density and other weeds. Weed control effect increased by the progress of vetch growth, which indicated that the vetch canopy over-shaded the weeds. Vetch straw was degraded rapidly submergence after with water at the time of wet sowing of rice. Early harvesting of vetch seed resulted in lower seed germination. To acquire enough seedlings without re-sowing, the harvesting of seed should be delayed at least 28 days after the flowering stage in order to ensure the vetch population is sustainable in a no-till direct-sown rice-vetch cropping system. In order to improve the survival of vetch plants, vetch seeds should germinate from the heading .stage to before the full-ripening stage of rice plants. To enhance the percent of over-wintering survival, vetch seeds should germinate no later than the end of October in southern Korea. The dry weight of vetch plants increased with the progress of vetch growth until the flowering stage but N content decreased for 30 days from before the flowering stage (2.9%) until the ripening stage (1.8%). We concluded that Chinese milk vetch could have an effect on weed control before the flowering stage, sustainability without re-sowing of seed annually, and effective green manure for rice pre-crop in no-till direct-sown rice-vetch relay cropping systems.

  • PDF

수소화 표면 개질이 나노다이아몬드 seed 입자의 분산 및 핵형성 밀도에 미치는 영향 (Effect of hydrogenation surface modification on dispersion and nucleation density of nanodiamond seed particle)

  • 최병수;전희성;엄지훈;황승구;김진곤;조현
    • 한국결정성장학회지
    • /
    • 제29권6호
    • /
    • pp.239-244
    • /
    • 2019
  • 수소 분위기 열처리 및 수소 플라즈마 처리의 두 가지 수소화 표면개질을통해 나노다이아몬드 seed 입자의 분산 향상 및 평탄한 초미세 나노결정질 다이아몬드 박막증착을 위한 핵형성 밀도 향상을 확보하였다. 수소화 처리 이후 나노다이아몬드 입자 표면의 탄소-산소 및 산소-수소 결합기가 탄소-수소 결합기로 전환되는 화학적 표면개질이 진행되었고 Zeta 전위가 증가하였다. 분산도 향상에 따라 나노다이아몬드 응집체 크기가 현저하게 감소하였고 핵형성 밀도는 크게 증가하였다. 600℃, 수소분위기에서 열처리 이후 나노다이아몬드 평균 입자 크기가 3.5 ㎛에서 34.5 nm로 크게 감소하였고, seeding 된 Si 기판 표면에서 ~3.9 × 1011 nuclei/㎠의 매우 높은 핵형성 밀도를 확보하였다.