• Geosciences Journal
• /
• v.22 no.6
• /
• pp.871-880
• /
• 2018

During and shortly after the 2017 Pohang Earthquake ($M_w$ 5.4), sand blows were observed around the epicenter for the first time since the beginning of instrumental seismic recording in South Korea. We carried out field surveys plus satellite and drone imagery analyses, resulting in observation of approximately 600 sand blows on Quaternary sediment cover in this area. Most were observed within 3 km of the epicenter, with the farthest being 15 km away. In order to investigate the ground's susceptibility to liquefaction, we conducted a trench study of a 30 m-long sand blow in a rice field 1 km from the earthquake epicenter. The physical characteristics of the liquified sediments (grain size, impermeable barriers, saturation, and low overburden pressure) closely matched the optimum ground conditions for liquefaction. Additionally, we found a series of soft sediment deformation structures (SSDSs) within the trench walls, such as load structures and water-escaped structures. The latter were vertically connected to sand blows on the surface, reflecting seismogenic liquefaction involving subsurface deformation during sand blow formation. This genetic linkage suggests that SSDS research would be useful for identifying prehistoric damage-inducing earthquakes ($M_w$ > 5.0) in South Korea because SSDSs have a lower formation threshold and higher preservational potential than geomorphic markers formed by surface ruptures. Thus, future combined studies of Quaternary surface faults and SSDSs are required to provide reliable paleoseismological information in Korea.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.47-47
• /
• 2020

하천 유사량 자료는 하천관리를 위해 기초적으로 활용되는 자료로 하천의 유지관리를 위한 유사량 자료의 측정은 필수적이다. 따라서, 현재 국내에서는 전국에 138개소의 국가유사량관측망에서 지속적인 유사량 측정을 수행하고 있지만, 기존의 재래식 부유사 채집기를 이용한 부유사 측정을 수행하고 있어 연간 약 20개소 내외에서만 직접조사가 수행되고 있고, 2019년도 기준 전국 138개소 중에서 2006년~2018년 동안 최소 1회 이상 유사량 측정을 수행한 지점은 40개소로 국가 유사량관측망의 약 29% 지점에 대해서만 조사가 수행되고 있다. 해외의 경우에도 기존 재래식 채집기를 통한 유사량 관측을 주로 수행하고 있지만 최근에는 기존 채집기를 이용한 유사량 조사방법의 고비용·저효율로 인한 시공간적 한계로 인해 대안기술이 개발되고 있다. 특히, 최근 해외에서는 ADCP를 활용한 유사량 측정 기술이 기존 부유사 채집기를 이용한 유사량 조사방법의 대안으로 시도되고 있다. ADCP를 이용한 유사량 측정방법은 ADCP의 초음파산란도를 활용하여 간접적으로 부유사의 농도를 추정하는 기술로 ADCP를 이용하여 유량자료과 함께 유사량 자료를 확보할 수 있을 것으로 기대되는 기술이다. 특히, 기존에 설치된 국가하천 자동유량측정장치(H-ADCP)에 적용이 가능하다면 다지점에서의 지속적인 유량측정과 함께 부유사 농도의 측정이 가능할 것으로 기대되고 있다. 이에 본 연구에서는 기존 국가하천에 설치되어 있는 자동유량측정장치(H-ADCP)의 초음파산란도를 활용한 부유사농도 측정 기술의 적용성을 검토하였다. 적용성의 검토를 위해 2016년 진동지점에서 수집된 H-ADCP 원시자료를 사용하여 초음파산란도를 활용한 부유사농도 측정 방법을 시범적으로 적용하였다. 적용결과, 실측 부유사농도와 H-ADCP로부터 추정된 부유사 농도를 비교를 통해서 H-ADCP를 활용한 부유사농도 측정 방법의 가능성을 확인할 수 있었지만, 기술적인 보완 및 개선이 필요할 것으로 판단되었다. 추후에는 지속적인 연구를 통해 ADCP 유사량 측정기술이 개발된다면 기존 부유사 채집기를 이용한 유사량 측정 방법의 대안으로 유사량 조사를 목적으로 활용이 될 수 있을 것으로 기대한다.

• Journal of Korea Water Resources Association
• /
• v.33 no.5
• /
• pp.581-592
• /
• 2000

Turbulence structure and suspended sediment transport capacity in vegetated open-channel flows are investigated numerically in the present paper. The $\textsc{k}-\;\varepsilon$ model is employed for the turbulence closure. Mean velocity and turbulence characteristics including turbulence intensity, Reynolds stress, and production and dissipation of turbulence kinetic energy are evaluated and compared with measurement data available in the literature. The numerical results show that mean velocity is diminished due to the drag provided by vegetation, which results in the reduction of turbulence intensity and Reynolds stress. For submerged vegetation, the shear at the top of vegetation dominates turbulence production, and the turbulence production within vegetation is characterized by wakes. For emergent condition, it is observed that the turbulence generation is dominated by wakes within vegetation. In general, simulated profiles compares favorably to measured data. Computed values of eddy viscosity are used to solve the conservation equation for suspended sediment, yielding sediment concentration more uniform over the depth compared with the one in the plain channel. The simulation reveals that the suspended load decreases as the vegetation density increases and the suspended load increases as the particle diameter decreases for the same vegetation density.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.7 no.4
• /
• pp.207-215
• /
• 2004

Recently, securing a vast land in the land region becomes more difficult and efforts to seek its alternation in the sea area have been increased. As a consequence, the coastal region has been faced to extensive beach erosion problems. In planning offshore structures such as artificial islands, it is necessary to forecast the influence of the structure construction exerting on the beach erosion of the adjacent coast. In the present study, the sediment movement pattern behind offshore structure was examined through a series of three dimensional movable bed experiments, so as to develop the numerical model which forecasts morphological change including beach erosions. The experimental results reveal that the sediment movement patterns of the beach line side and the depth region are separated at a certain boundary line. In details, at the beach side including swash zone the sediment movement becomes dominant, which is governed by a relation between depth contours and incident wave directions, while at the depth region the bed load and suspended load due to the orbit motion of waves are carried by nearshore currents, and both movements are clearly separated at a specified boundary that is related to partial standing wave from the beach. It is expected that these results can be effectively used for verification of a numerical model on morphological change of the coast.

• Journal of Wetlands Research
• /
• v.9 no.3
• /
• pp.43-49
• /
• 2007

A ditch is a facility for managing washed-off runoff from parking lot area. Washed-off runoff inflows into ditches where it is retained for a short period of time. At this point, it is assumed that a ditch is a preliminary unit for runoff treatment. This research carries out the distribution of particle size and chemical compound for sediment in parking lot ditch. This work is important to understand the amount of generated sediment from this area to be able to determine different particle size ranges for treatment. Metal concentrations for sediment according to particle size are analyzed. From the distribution of particle size, the weight ratio with the range of $425-850{\mu}m$ is the highest. Considering its weight ratio, the metal concentration of coarser particles is high, otherwise metal concentration increases as particle size decreases. Metal load of the range is higher and the ratio of total metal load in the case of Cu, Pb, Zn is nearly 30%. Moreover metal concentration associated with particle size depends on particle ratio. To manage non-point source pollution for parking lot area, these results can be used with this ditch unit.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.1
• /
• pp.1-12
• /
• 2007

Mooring survey for measurement of tidal current and suspended sediments was carried out at 4 inlets of Yeoja Bay in April, 2000 in order to understand the source of sediment supply. Net suspended sediment transport load during 2 tidal cycles through the M-1(West Inlet) was $133.88\;kg{\cdot}m^{-1}$ toward the Yeoja Bay, whereas the flux through the M-2(Jabal Inlet) was outward the Bay with the amount of $146.43\;kg{\cdot}m^{-1}$. The influx through the M-3 and 4(Bulgyo and Dong Isa Stream) was $23.25\;kg{\cdot}m^{-1}$ and $4,312.31\;kg{\cdot}m^{-1}$ toward the Yeoja Bay, respectively. Influx of suspended sediment on Yeoja Bay mainly occurred in the Dong Isa Stream. In the wet season the composition of surface was coarser-grained than dry season, possibly due to the influx of silty sediment from Dong Isa Stream In the wet season.

• Journal of Advanced Research in Ocean Engineering
• /
• v.2 no.3
• /
• pp.99-111
• /
• 2016

Seabed affected by scouring, sedimentation, and siltation occurrences often cause exposure, which induces risks to existing structures or crude oil or gas pipeline buried subsea. In order to prevent possible risks, more economical structure installation methodology is proposed in this study by predicting and managing the risk. Also, the seabed does not only consist of sandy material, but clayey soil is also widespread, and the effect of undrained shear strength should be considered, and by cyclic environmental load, pore water pressure will occur in the seabed, which reduces shear strength and allows particles to move easily. Based on previous research regarding sedimentation or erosion, the average value of external environmental loads should be applied; for scouring, a 100-year period of environmental conditions should be applied. Also, sedimentation and erosion are mainly categorized by the bed load and suspended load; also, they are calculated as the sum of bed load and suspended load, which can be obtained from the movement of particles caused by sedimentation or erosion.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Water Engineering Research
• /
• v.2 no.3
• /
• pp.179-185
• /
• 2001

The time consuming and expensive nature of experimental research on scouring processes caused by flowing water makes it attractive to develop numerical tools for the predication of the interaction of the fluid flow and the movable bed. In this paper the numerical simulation of scour by a wall jet is presented. The flow is assumed to be two-dimensional, and the alluvium is cohesionless. The solution process, repeated at each time step, involves simulation of a turbulent wall jet flow, solution of the convection-diffusion of sand concentration, and prediction of the bed deformation. For simulation of the jet flow, the governing equations for momentum, mass balance and turbulent parameters are solved by the finite volume method. The SIMPLE scheme with momentum interpolation is used for pressure correction. The convection-diffusion equation is solved for sediment concentration. A boundary condition for concentration at the bed, which takes into account the effect of bed-load, is implemented. The time rate of deposition and scour at the bed is obtained by solving the continuity equation for sediment. The shape and position of the scour hole and deposition of the bed material downstream of the hole appear realistic.

• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.484-497
• /
• 2016

In order to understand the characteristics of the topography change in front of an impermeable breakwater, a coupled model for a two-way analysis of the existing LES-WASS-2D and newly developed morphodynamic model was suggested. A comparison to existing experimental results revealed that the results computed using the 2-D hydro-morphodynamic model were in good agreement with the experimental results for the wave form, pore water pressure in the seabed, and topographical change in front of a submerged breakwater. It was shown that the two-way model suggested in this study is applicable to a morphological change in the seabed around a submerged breakwater. Then, using the numerical results, the topographical changes in front of an impermeable submerged breakwater were examined in relation to partial standing waves. Moreover, the characteristics of the local scour depths in front of them are also discussed in relation to incident wave conditions, sediment qualities, and submerged breakwater shapes.