• 펄프종이기술
• /
• 제43권4호
• /
• pp.76-81
• /
• 2011

This study was carried out in order to develop a speciality functional coated paper, which can be recognized under a ultraviolet lamp. The special fluorescent whitening agent (FWA) which absorbs ultraviolet light (397~410 nm) and emits it as yellowish light (570~500nm) was used. The special FWA was applied in a coating color in two ways: (1) direct application to a coating color as a FWA; (2) application on pigment surface, drying it and application it as a fluorescence whitening pigments (colored pigments). The effects of the special FWA on coating color properties were tested and the distribution of colored pigments in coated paper was evaluated under a ultraviolet lamp. The results showed that the colored pigments didn't affect on coating color properties. Experimental results showed the possibility of producing a security coated paper using the special FWA. To produce a speciality functional paper, it was found to be proper to apply the special FWA in the form of colored pigment.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1825-1838
• /
• 2016

The detection of skin pigment is crucial in the diagnosis of skin diseases and in the evaluation of medical cosmetics and hairdressing. Accuracy in the detection is a basis for the prompt cure of skin diseases. This study presents a method to recognize and measure human skin pigment using Hemoglobin-Melanin (HM) coordinate. The proposed method extracts the skin area through a Gaussian skin-color model estimated from statistical analysis and decomposes the skin area into two pigments of hemoglobin and melanin using an Independent Component Analysis (ICA) algorithm. Then, we divide the two-dimensional (2D) HM coordinate into rectangular bins and compute the location histograms of hemoglobin and melanin for all the bins. We label the skin pigment of hemoglobin, melanin, and normal skin on all bins according to the Bayesian classifier. These bin-based HM projective histograms can quantify the skin pigment and compute the standard deviation on the total quantification of skin pigments surrounding normal skin. We tested our scheme using images taken under different illumination conditions. Several cosmetic coverings were used to test the performance of the proposed method. The experimental results show that the proposed method can detect skin pigments with more accuracy and evaluate cosmetic covering effects more effectively than conventional methods.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• Journal of the Korean Wood Science and Technology
• /
• 제27권3호
• /
• pp.82-90
• /
• 1999

송광사 삼세불화는 조성년도가 확실하지 않지만 남아있는 서기(書記)와 재질 분석을 통해 19세기초에 제작된 것으로 추정 할 수 있었다. 그리고 공시불화의 보존처리를 위해 안료층과 바탕층, 지지층을 구성하고 있는 재질을 분석하고 이에 적합한 지지층인 배첩지를 초지하여 그 적합성을 시험한 바 다음과 같은 결론을 얻었다. 1. 삼세불화의 단면구조는 안료층과 명주로 된 바탕층 그리고 한지(韓紙)로 이루어진 지지층으로 구성되어 있어 19세기 당시의 불화는 기본적으로 안료층, 바탕층, 지지층으로 구성되어 있음을 알 수 있었다. 또한 안료층과 바탕층의 접착은 아교를 사용하였고 지지층의 sheet 배첩은 호료(糊料)를 사용했음을 알 수 있었다. 2. 삼세불화의 지지층은 5겹으로 구성되어 있고 두 종류의 종이가 사용되었는데 바탕층과 접해 있는 1~2층은 순수한 닥섬유로 제조한 한지(韓紙)를 사용하였고 나머지 3개 층은 폐마섬유(廢麻纖維)에 닥섬유가 혼합된 종이를 사용하였다. 더 많은 자료가 확보되어야만 단언할 수 있지만 재질을 통해 당시의 상황을 파악해 보면 19세기 당시의 사회는 경제적으로 어려움을 겪고 있었고 더욱이 사찰 제지업은 피폐해져 운영이 어려워 후면에 사용한 배첩지는 질이 떨어지는 폐마를 이용 했을 것으로 추측되었다. 3. 본 재료의 바탕층과 지지층간의 인장력을 고려하여 새롭게 제조해 보수용으로 사용한 바 본 공시재료의 보수용 배첩지로서 적합했음을 알 수 있었다.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.11-16
• /
• 2011

This study was aimed to apply thermochromic and photochromic pigments to coating color and to develop a speciality functional coated layer. Two special pigments were added to a conventional coating color. The effects of the special pigments on coating color properties such as water rerention, low-shear viscosity were evaluated. Also the color changes of coated paper was observed under various circumstances. The results showed that the special pigments didn't influence the coating color properties. The coated paper with the special pigments showed four different colors, under various circumstances, implying that thermochromic and photochromic pigments can be used to produce a security paper.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.563-570
• /
• 2019

적조는 연안 해역에서 양식어류를 폐사 시키는 등 많은 경제적 피해를 입혀왔다. 이러한 적조의 광역 분포를 효과적으로 파악하기 위하여 원격탐사가 활용되어 왔는데, 적조 해수가 가지는 흡광 특성은 원격탐사에 중요한 요소인 해수반사도를 이해함에 있어서 핵심적인 역할을 한다. 본 연구에서는 2017년 8월 통영 인근 해역에서 출현한 Alexandrium affine 종이 우점한 해수에 대한 흡광 특성을 분석하였다. 선박 관측을 통하여 총 20개 정점에서 획득한 시료에서 색소 흡광, 부유물 흡광, 용존유기물 흡광을 측정하였고, 이를 수질 변수인 엽록소 농도, 부유물 농도와 관련하여 분석하였다. 분석 결과, 규조류 우점 해수와는 다르게 Alexandrium 우점 시료는 400 nm 이하에서 강한 흡광을 나타내었고, 또한 400 nm - 500 nm 에서 굴곡이 크게 나타남을 확인하였다. 색소 흡광의 집적 효과 또한 규조류와 다르게 나타남을 확인하였고, 부유물 및 용존유기물 흡광 모델 (a_dg(λ)=a_dg(λ₀)e^-s(λ-λ₀))에서의 지수부 계수(s) 역시 기존 규조류에서 일반적으로 사용하는 0.015와는 달리 0.01이 더 적합함을 보였다.

• 한국분말재료학회지
• /
• 제24권6호
• /
• pp.457-463
• /
• 2017

Nanosized $Gd_2O_3:Eu^{3+}$ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between $Gd_2O_3:Eu^{3+}$ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged $Gd_2O_3:Eu^{3+}$ and negatively charged mica above pH 6. To prepare $Gd_2O_3:Eu^{3+}$-coated mica ($Gd_2O_3:Eu/mica$), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of $Gd_2O_3:Eu^{3+}$. In spite of the low luminescence of the $Gd_2O_3:Eu/mica$, the luminescent property is recovered after calcination above $600^{\circ}C$ and is enhanced by increasing the $Gd_2O_3:Eu^{3+}$ coating amount. The $Gd_2O_3:Eu/mica$ is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.