• 제목/요약/키워드: Section Change

검색결과 1,400건 처리시간 0.026초

굴착심도 변화에 따른 원형수직구 Ring Beam의 거동분석 (Behavior Analyses of Ring Beam at Vertical Wall with Change of Excavation Depth)

  • 박진은;경갑수;이준호;윤철희
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제12권5호
    • /
    • pp.116-124
    • /
    • 2008
  • 본 연구에서는 원형수직구 굴착에 따른 Ring Beam의 거동을 평가하기 위하여 현장계측 자료의 분석과 평가, 굴착심도 변화에 따른 Ring Beam의 응력 특성 등의 비교분석을 구조해석에 기초하여 평가하였다. 그 결과, Ring Beam의 거동은 현장계측 및 구조해석 결과에서 유사한 경향을 나타내는 것을 알 수 있었다. 이로부터 굴착심도 변화에 따른 Ring Beam 거동은 본 연구에서 제안한 구조해석에 의해 예측할 수 있는 것을 확인하였다.

5축 가공에 의한 SCM415 롤러 캠 개발과 표면조도 연구 (A Study on the Development and Surface Roughness of Roller Cam SCM415 by 5-Axis Machining)

  • 김진수;이동섭;강성기
    • 한국정밀공학회지
    • /
    • 제30권4호
    • /
    • pp.397-402
    • /
    • 2013
  • In this study, we carried out the each lines of section, using GC (green silicon carbide) whetstone, the SCM415 material which separated by after and before heat treatments process, in 3+2 axis machining centers for integrated grinding after cutting end mill works, the spindle speed 8000 rpm and feed rate 150 mm/min. For the analysis of the centerline average roughness (Ra), we measured by 10 steps stages. Using Finite element analysis, we found the result of the load analysis effect of the assembly parts, when applied the 11 kg's load on both side of the ATC (Automatic tool change) arm. The result is as follows. For the centerline average roughness (Ra) in the non-heat treatment work pieces, are appeared the most favorable in the tenth section are $0.510{\mu}m$, that were shown in the near the straight line section which is the smallest deformation of curve. In addition, the bad surface roughness appears on the path is to long by changing angle, the more inclined depth of cut, because the chip discharging is not smoothly.

Probabilistic analysis of tunnel collapse: Bayesian method for detecting change points

  • Zhou, Binghua;Xue, Yiguo;Li, Shucai;Qiu, Daohong;Tao, Yufan;Zhang, Kai;Zhang, Xueliang;Xia, Teng
    • Geomechanics and Engineering
    • /
    • 제22권4호
    • /
    • pp.291-303
    • /
    • 2020
  • The deformation of the rock surrounding a tunnel manifests due to the stress redistribution within the surrounding rock. By observing the deformation of the surrounding rock, we can not only determine the stability of the surrounding rock and supporting structure but also predict the future state of the surrounding rock. In this paper, we used grey system theory to analyse the factors that affect the deformation of the rock surrounding a tunnel. The results show that the 5 main influencing factors are longitudinal wave velocity, tunnel burial depth, groundwater development, surrounding rock support type and construction management level. Furthermore, we used seismic prospecting data, preliminary survey data and excavated section monitoring data to establish a neural network learning model to predict the total amount of deformation of the surrounding rock during tunnel collapse. Subsequently, the probability of a change in deformation in each predicted section was obtained by using a Bayesian method for detecting change points. Finally, through an analysis of the distribution of the change probability and a comparison with the actual situation, we deduced the survey mark at which collapse would most likely occur. Surface collapse suddenly occurred when the tunnel was excavated to this predicted distance. This work further proved that the Bayesian method can accurately detect change points for risk evaluation, enhancing the accuracy of tunnel collapse forecasting. This research provides a reference and a guide for future research on the probability analysis of tunnel collapse.

Modeling of Grade Change Operations in Paper Mills

  • Ko, Jun-Seok;Yeo, Yeong-Koo;Ha, Seong-Mun;Lim, Jung-Woo;Ko, Du-Seok;Hong Kang
    • 펄프종이기술
    • /
    • 제35권5호
    • /
    • pp.46-52
    • /
    • 2003
  • In this work we developed the closed-loop model of a paper machine during grade change with the intention to provide a reliable dynamic model to be used in the model-based grade change control scheme. During the grade change, chemical and physical characteristics of paper process change with time. It is very difficult to represent these characteristics on-line by using physical process models. In this work, the wet circulation part and the drying section were considered as a single process and closed-loop identification technique was used to develop the grade change model. Comparison of the results of numerical simulations with mill operation data demonstrates the effectiveness of the model identified.

금강하구둑 배수갑문 조작에 의한 상류수역의 수위변동 (Variation of Water Level on the Upstream Gauging Station by Operation of the Drainage Sluice Gate of Geumgang Estuary Dam)

  • 박승기
    • 한국농공학회논문집
    • /
    • 제47권6호
    • /
    • pp.15-24
    • /
    • 2005
  • The normalization on the characteristics of water level change at the upstream gauging station was attempted according to the operation of drainage sluice gate of the Geumgang estuary dam. The characteristics were normalized by the analysis of water level change and by the linear-regression of the water level data measured at the inner station of Geumgang estuary dam and upstream gauging station. The results of normalization may be referred to the management of Geumgang estuary lake, the operation of pumping and drainage stations in the shore of the lake. The mean response time of water level change on Ibpo, Ganggyeong and Gyuam water level station were 39,81 and 160 minutes, when sluice gate was opened respectively. The mean velocity of surface wave, the mean displacement of water level change, the mean time of water level change and the mean rate of water level change varied largely depending on the location of gauging station and the characteristics of stream section of the water level gauging station.

내성천 급만곡부에서 유량 변화에 의한 흐름 및 하도변화 수치모의 (Numerical Simulation of Flow Characteristics and Channel Changes with Discharge in the Sharped Meandering Channel in the Naeseongcheon, Korea)

  • 장창래
    • Ecology and Resilient Infrastructure
    • /
    • 제4권1호
    • /
    • pp.24-33
    • /
    • 2017
  • 본 연구에서 내성천 만곡부에서 유량의 변화에 의한 흐름 및 하도 변화를 2차원 수치모형인 Nays2DH를 이용하여 분석하였다. 만곡부를 통과 된 후에 하폭이 좁은 구간에서 만곡부 외측으로 수심이 깊게 형성되었다. 하폭이 넓은 구간에서는 점사주가 형성된 만곡부 내측에서는 수심이 얕게 형성되었다. 흐름이 집중되는 만곡부 외측에서는 수심이 깊게 형성되었다. 직선이 형성된 하류 구간에서 흐름은 하도 중앙에 집중되었다. 연속적으로 사행이 형성되면서 번갈아 가며 수심이 깊은 곳과 얕은 곳이 형성되었다. 이러한 특성은 사행하천에서 강한 2차류의 영향을 받아 형성된 것이다. 무차원소류력도 유속이 집중된 부분에 크게 나타났다. 그러나 하폭이 감소하고 급만곡부가 형성된 곳에서는 유속과 무차원소류력의 변화에 대한 하상고 변화가 일치되지 않았다.

개정(改正) SGA의 특징(特徵)과 문제점(問題點)에 관한 연구(硏究) (A Study on the Main Features and Problems of SGA Amendment)

  • 최명국
    • 무역상무연구
    • /
    • 제16권
    • /
    • pp.83-114
    • /
    • 2001
  • This paper is focussed on the main features and problems of SGA amendment. main features and problems are as below. First, SGA section 14 uses a new term, that of "satisfactory quality", which is defined in a somewhat circular way and introduces some guidelines in order to solve other problems perceived as arising under the "merchantable quality". The change was largely to assist in the better resolution of consumer disputes and not necessary for commercial disputes because the change involves the substitution of a phrase which meant something but was inappropriate to commercial disputes. As with the definition of "merchantable quality", a court can take the new formulation as an invitation to start afresh; or it can refer to the previous case law. Second, before the SGA amendment, a contract for the sale of undifferentiated part of a bulk shipped or to be shipped on a named ship was a contract for the sale of unascertained goods. So the effect was that property could not pass to the buyer, even though he had paid the price in full, before the goods become ascertained. The main object of the SGA amendment was to improve the buyer's position where he had paid for a specified quantity of goods forming an undifferentiated part of an identified bulk and the seller then became insolvent before the goods for which the buyer had paid were ascertained. The improvement was achieved by making section 16 of the SGA 1979 subject to a new section 20A and includig section 20B, under which a buyer of a specified quantity bulk can acquire a proprietary interest in the bulk. This proprietary solution still has some problems in international sale of goods. Therefore, it would be more appropriated SGA should settle disputes between parties through payment, passing of risk, delivery of goods and/or documents etc. instead of property rights like UCC.

  • PDF

고속도로 노면표시 감속유도시설 효과평가 (Effectiveness of the Peripheral Transverse Line as Speed-Reduction Treatment on Korean Expressway Ramps)

  • 이성관;이기영;김석출
    • 한국도로학회논문집
    • /
    • 제14권6호
    • /
    • pp.85-92
    • /
    • 2012
  • PURPOSES : Since expressways in South Korea are toll roads, many trumpet type interchanges exist, resulting in the installation of loop ramps very frequently. While the travel speed of the main lane is designed to be 100-110 km/h, the structure of a loop ramp is different and is designed for a minimum speed of 40 km/h. In fact, most of the actual travel speeds measured on the ramp exceed the designated speed, which has been a major problem in traffic safety. In this research, a type of pavement marking speed-reduction treatment called the "Peripheral Transverse Line" is installed on expressway loop ramps in order to study the change of driving speeds after the installation. METHODS : To verify statistically the change, this speed-reduction treatment has been installed on the Chungju interchange and the Yeoju junction. The driving speeds before the installation were compared with driving speeds both one month and five monthsafter the installation. RESULTS : As a result, the reductions of the average driving speeds after the treatment were statistically significant. More specifically, the average driving speeds of the Chungju interchange were reduced by 7.1-7.7 % for its tangent road section, and the speeds decreased by 8.5-9.5 % for its curve section. Similarly, in the Yeoju junction, an average speed reduction of 2.9-4.8 % for its tangent section was measured, along with 3.9% long-term speed reduction for its curve section. CONCLUSIONS : Since the pavement marking speed-reduction treatment has been partially proven to be effective from this research, we expect to expand this treatment and re-confirm the effect from a long-term perspective in the future.

미국 인터넷 내용규제의 정치: 신제도주의로 본 연방통신품위법 230조 개정 논의 (The Politics of Internet Content Regulation in the U.S.: A Case Study on Communications Decency Act Section 230 Reform with New Institutionalist Approach)

  • 최재동
    • 정보화정책
    • /
    • 제29권3호
    • /
    • pp.48-60
    • /
    • 2022
  • 이 연구는 미국 연방통신품위법 230조의 개정 논의를 신제도주의의 관점에서 분석하였다. 지금까지 내구력을 유지하며 미국 인터넷 내용규제의 기본틀을 구성해왔던 연방통신품위법 230조의 면책 조항은 오늘날 중대한 전환에 직면해 있다. 이 조항을 개폐하려는 정치적 시도들이 초당적인 협력으로 진행되고 있기 때문이다. 역사적 제도주의의 관점으로 연방통신품위법 230조의 개폐 논의를 분석한 결과, 미국 인터넷 내용규제 레짐의 변동은 가짜뉴스나 개인 정보 유출과 같은 외생적 사건과 함께, 행위자 간의 경쟁과 갈등이라는 내생적 요인이 복합적으로 작용해 발생한 것으로 여겨진다. 이상의 분석은 한국의 인터넷 내용규제 거버넌스의 제도개선과 방향성에 대해서도 함의를 지닐 수 있다.

지상 라이다를 이용한 단기간 해빈과 해안사구의 지형변화 연구 (The short-term morphological changes of the beach and dune using by terrestrial LIDAR)

  • 신대섭;서종철
    • 한국지형학회지
    • /
    • 제18권4호
    • /
    • pp.283-296
    • /
    • 2011
  • 경북 포항시 북구 송라면의 화진 해빈을 대상으로 지상 라이다를 이용하여 두 차례 측량한 후 단기간의 해빈과 해안사구 지형 변화를 분석하고 그 결과를 토대로 해빈의 역동성과 일반 이론의 적용 가능성을 검토하였다. 2010년 9월과 10월에 2회에 걸쳐 측량된 자료를 통해 10cm 간격의 고해상도 DEM과 음영기복도를 제작하였다. 그 결과 수 cm 단위의 해안 미지형을 파악할 수 있었고, 측정 시기에 따른 해안선의 위치와 해안지역의 면적 변화가 정확하게 확인되었다. DEM을 이용한 단면 분석에서는 북쪽 해빈의 비치페이스(beach face)가 침식 현상이 확인되었고, 남쪽 해빈에서는 중간 부분의 비치페이스(beach face)에서 퇴적 현상이 확인되었다. 또한 두 시기의 지형 단면은 파랑의 에너지 상태를 잘 반영하는 것으로 나타났다.