• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.219-225
• /
• 2021

As for the battery package method, a prismatic package method is preferred for stability reasons, but it is rapidly expanding due to the stability verification of a pouch type package. The pouch type using the lamination process has an advantage of high battery energy density because it can reduce space waste, but has a disadvantage of low productivity. Therefore, in this paper, by extracting edge detection algorithm precision, pattern algorithm precision, and motion controller recall rate by improving backlight lighting fixtures to minimize light diffusion, securing standards for stereo camera position relationship displacement monitoring, and securing standards for lens release monitoring. We propose to implement a system that ensures accuracy and reliability in positioning. As a result of the experiment, the proposed system shows an average error range of 0.032mm for edge detection, 0.02mm for pattern algorithm, and 0.014mm for motion controller, thus ensuring the accuracy and reliability of the positioning mechanism.

• Journal of the Korean Institute of Gas
• /
• v.28 no.1
• /
• pp.11-18
• /
• 2024

If flammable liquid leaks, vapor evaporated from the pool can cause poisoning or suffocation to workers, leading to secondary accidents such as fires and explosions. To prevent such damage, ventilation facilities shall be installed when designing indoor workplaces. At this time, the behavior varies depending on the characteristics of the leaked chemical, so it is necessary to select a suitable vent location according to the material. Therefore, 3D CFD simulations were introduced to derive optimal vent position and ventilation efficiency was quantitatively evaluated by vent position. At this time, assuming a situation in which flammable liquids leak at indoor workplaces to form pools, the concentration of vapor evaporated from pools was compared to derive the optimal vent position. As a result of research on toluene with high vapor density, ventilation efficiency was confirmed to be the highest at the upper supply-lower exhaust, and it is judged that introducing it can achieve about 3.7 times ventilation effect at the same maintenance cost. Through this study, it is expected that the workplace will be able to secure workers' safety by applying simulation results and installing ventilation ports.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.473-480
• /
• 2013

In this paper, location recognition algorithm is developed to improve the accuracy using improve Trilateration. The location recognition algorithm is first calculate the location refer to the measured signal power. Error can be occurred when measure distance with arranged node in specific location. If the distance data is received from node (receiver, coordinator), Node selected for location calculation is defined through section. If the distance data is received from node (receiver, coordinator), Node selected for location calculation is defined through section. Second, we apply algorithm of section filtering. If there are 4 sections in node, we consider 1 section to 6 location recognition coordinates. A special characteristic drawback of RF is that the actual distance is actually farther than the calculated received distance data. This is error is incurred when the signal strength increases. We reduce the location recognition error by applying an improved algorithm as secondary after filtering primary through section filtering.

• Structural Engineering and Mechanics
• /
• v.63 no.4
• /
• pp.567-574
• /
• 2017

Sedimentation tanks are essential structures to filter the suspended sediments in the inlet flow which are constructed at the inlet of the basins forked from rivers and irrigation canals. The larger the constructed tank, the better the sedimentation process is conducted. However, the construction and dredging costs increase. In this regard, improving the performance and sedimentation efficiency seem necessary by alternative methods. One of these effective methods is using baffle plates. Most of the studies carried out in this field are on the use of these baffles in the primary and secondary sedimentation tanks. Hence, this study is carrier out with the objective of increasing the retention efficiency in the irrigation sedimentation tanks using baffles. To reach this goal, the experiments were carried out in a flume with length 8 meters, width 0.3 meters, and height 0.5 meters, considering a sedimentation tanks with a length of 3 meters, in three different inlet concentration, three flow rates and three Froude numbers. The baffles were mounted at the bottom of the tank and the effects of the angle, height and position in the tanks were investigated. The results showed that on average, employing the baffles increased the sedimentation efficiency 5 to 6% and the highest value was obtained for angle 60 with respect to the flow direction. According to the results of this study, the most favorable height and position of these baffles were obtained to be in 40% of the depth of the flow and 50% of the length of the sedimentation tank, respectively. Also, by increasing the number of baffles, the sedimentation efficiency decreased. Regarding the sedimentation regions in this case, more than 80% of the settled sediments were observed in the middle of the tank measured from the inlet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.979-984
• /
• 2009

In this paper, the technique for production and encoding of new dot-type print watermark is proposed. The print watermark has characteristics similar to those of the digital watermark and function as link which change various first informations(texts, symbols, figures, etc) on the printed matter to secondary contents (sound, video, character, etc) corresponding each to informations on the printed matter. The proposed dot-type print watermark pattern is represented as $16{\times}16$ matrix in $0.4mm^2$ area and dots are printed on only 23 elements of $16{\times}16$ matrix. The size of each dot is so small(0.02mm)that it can not be seen. Because position of printed dots correspond to the position of each digit in binary notation in this paper, they are encoded easily and there are about 8,000,000 watermark patterns enough to express first information of printed matters. It was showed that the proposed print watermark patterns are recognized without difficulty by the own recognition device.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.6
• /
• pp.93-98
• /
• 2014

Bicycle accidents increase as the number of people riding bicycles increases following the trend try to enhance health and looking for alternative energy sources in the era of high oil price. In bicycle accident cases, physical risk is higher because the impact of the accident has a direct effect on the body of the rider. Therefore, the bicycle rider in an accident might unable to report the accident by themselves, thus, unable to quickly respond to the accident situation. This study developed a system for informing bicycle accidents upon bicycle accident by reporting and texting the accident location using a smart phone application after identifying the accident location using a GPS equipment based on the signal that senses the accident through the system installed in the bicycle for the purpose to improve bicycle riders' safety. This study confirmed the effectiveness of the system developed to quickly respond to the accident to prevent secondary damage through an experiment.

• Journal of Environmental Science International
• /
• v.20 no.6
• /
• pp.687-700
• /
• 2011

A new $N_3-O_2$ pentadentate ligand, H-BHPT, was synthesized. Hydrochloric acid salts of Br-BHPT, Cl-BHPT, $CH_3O$-BHPT and $CH_3$-BHPT, having Br-, Cl-, $CH_{3-}$ and $CH_3O-$ substituents at the para position of the phenol hydroxyl group of H-BHPT were synthesized. Hydrochloric acid salts of 3OH-BHPT and 4OH-BHPT, having different position of the phenol hydroxyl group of H-BHPT were also synthesized. The synthesis of each ligand was confirmed by C. H. N. atomic analysis and $^1H$ NMR, $^{13}C$ NMR, UV-visible, and mass spectra. The calculated proton dissociation constants ($log{K_n}^H$) of the phenol hydroxyl group and secondary amine group of the synthesized $N_3-O_2$ ligands showed five steps of the proton dissociations. The order of the overall proton dissociation constants ($log{\beta}_p$) of the ligands was Br-BHPT < Cl-BHPT < H-BHPT < $CH_3O$-BHPT < $CH_3$-BHPT. The order agreed with that of Hammett substituent constants (${\delta}_p$). However, dissociation steps of 3OH-BHPT were four and that of 4OH-BHPT was three. The calculated stability constants ($logK_{ML}$) between the ligands and transition metal ions agreed with the order of $log{\beta}_p$ values of the ligands. The order of the stability constants between the transition metal ions with the synthesized ligands was Co(II) < Ni(II) < Cu(II) > Zn(II) > Cd(II) > Pb(II). The order agreed well with that of the Iriving-Williams.

• Korean journal of food and cookery science
• /
• v.25 no.5
• /
• pp.575-585
• /
• 2009

This study was conducted to identify the job stress factors of school foodservice employees and to examine the relationship between job stress and turnover intention through path analysis. Data was collected using a survey of 432 school foodservice employees in elementary and secondary schools in Masan, Kyungsangnam-do. All of the participants were female, and 165(52.9%) were over the age of 45' Additionally, 310(99.4%) of the respondents were married, while 287(92.0%) had less than a high school level of education. Furthermore, 271(86.9%) of the respondents were cooks. Overall, 107(34.3%) of the respondents had worked in the food industry for less than $5{\sim}10$ years. In addition, 208 (66.7%) respondents answered that they had 'never' changed jobs. Among job characteristics that causes job stress, job posture was the primary stress factor, followed by heavy work load and job condition. Job stress was found to be significantly correlated with turnover intention. Additionally, job position was the only moderating variable that was found to be correlated with job characteristics and job stress. Finally, the moderating variables influencing the effects of job stress on turnover intention were identified as performance confidence, job career, and job position. The results of this study will be useful for future studies conducted to evaluate the development of job environments and performance to minimize turnover and job inefficiency as a result of job stress.

• Journal of architectural history
• /
• v.17 no.4
• /
• pp.97-112
• /
• 2008

In this study, I attempted to the architectural design characteristics of Daeung-Jeon in Sudeok Temple. For this purpose, After I set up several assumptions in the basis of the general characteristics of Korean wood architecture, and then, analyzed floor plan, structural formation and section sizes of structure and bracket members in relation to module and unit. As the results, the characteristics of the design process of plan and structure are follows. (1) 1 ja(尺), the unit applied to this building is measured $307.6{\sim}318.3mm$) and the average is 312.9mm (2) It is estimated that the floor plan designed on the basis of the top of columns. By the applied unit, every bay of the front side and the side is each designed by 15 ja and 8.5 ja. (3) The section is composed of piled members which have same section size. As basic module of section size called 'jae(재;材)', it is estimated at width 0.45 ja by height 0.75 ja. And as the secondary module, height between jae and is called 'gyoe(계;)' and it wes designed by three height size of 0.25 ja, 0.27 ja and 0.30 ja, (4) It is estimated that the section plan was designed by the order as follows. Firstly, the horizontal position of purlins wes decided on the basis of the intersection point of long and short rafters, and then the position and the section size of purlins and jangheyo(長舌) wes decided on the basis of the slope of roof and rafters. Secondly, going down from purlins, the members of structure composed of 'jae' and 'gyoe' was repeated. Lastly, for the purpose of linking the structure members located on the center line of adjacent purlins organically, the height of whaban(화반) was controlled.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.1
• /
• pp.70-77
• /
• 2014

This paper proposes a novel localization algorithm based on ego-motion which used Lucas-Kanade Optical Flow and warping image obtained through fish-eye lenses mounted on the robots. The omnidirectional image sensor is a desirable sensor for real-time view-based recognition of a robot because the all information around the robot can be obtained simultaneously. The preprocessing (distortion correction, image merge, etc.) of the omnidirectional image which obtained by camera using reflect in mirror or by connection of multiple camera images is essential because it is difficult to obtain information from the original image. The core of the proposed algorithm may be summarized as follows: First, we capture instantaneous $360^{\circ}$ panoramic images around a robot through fish-eye lenses which are mounted in the bottom direction. Second, we extract motion vectors using Lucas-Kanade Optical Flow in preprocessed image. Third, we estimate the robot position and angle using ego-motion method which used direction of vector and vanishing point obtained by RANSAC. We confirmed the reliability of localization algorithm using ego-motion based on fisheye warping image through comparison between results (position and angle) of the experiment obtained using the proposed algorithm and results of the experiment measured from Global Vision Localization System.