• Korean Journal of Veterinary Research
• /
• v.35 no.2
• /
• pp.405-416
• /
• 1995

FBs, secondary metabolites of several species of Fusaria, especially Fusarium moniliforme and F proliferatum, are commonly contaminated in com and other food grains throughout the world. Only recently identified, these mycotoxins have been associated field outbreaks of ELEM in horses and PPE in pigs. Currently, naturally or experimentally induced FB toxicosis has been studied in poultry, ruminants and rabbits. Poultry fed FB showed decreased growth rate, performance, and immune competence, as well as embryopathic, and embryocidal effects, and ricktes. Ruminants seem to be relatively less susceptible to FBs than other doestic animal. FB toxicosis reveals that liver is a target organ in all species, although other organs are affected in a species specific manner. Recently, the main target organs for $FB_1$ toxicity in rabbits was shown to be the kidney. Even low concentrations of FBs are likely to be a problem for animal health. A current study being conducted showed that feed containing low level of $FB_1$ reduces the ability of pulmonary intravascular macrophages in pig to clear blood-borne particles which would increase the susceptibility of animals to bacterial disease. The mechanism of FB toxicity remains unknown, but may be related to altered sphingolipid biosynthesis by inhibiting sphinganine N-acyltransferase. Elevations of serum and tissue SA:SO ratio have been observed in horse, pig, chicken, turkey, and rabbit, which could could serve as in effective biomarker for consumption of FB-containing feeds. There is limited information detailing dose-effect relationships either from field cases or in the laboratory. More research on the factors, including the prevalence and tolerance levels of FBs in feedstuffs that cause domestic animal disease associated with FBs, is urgently needed.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.153-160
• /
• 2020

Most studies defined microplastic (MP) as plastic particles less than 5 mm. The ubiquity of MP is raising awareness due to its potential risk to humans and the environment. MP can cause harmful effects to humans and living organisms. This paper review aimed to provide a better understanding of the sources, pathways, and impacts of MP in the environment. MP can be classified as primary and secondary in nature. Moreover, microplastic can also be classified as based on its physical and chemical characteristics. Stormwater and wastewater are important pathways of introducing MP in large water bodies. As compared to stormwater, the concentrations of MP in wastewater were relatively lower since wastewater treatment processes can contribute to the removal of MP. In terms of polymer distribution, wastewater contains a wider array of polymer varieties than stormwater runoff. The most common types of polymer found in wastewater and stormwater runoff were polypropylene (PP), polyvinyl chloride (PVC), polystyrene (PS), polyethylene (PE) and polyethylene terephthalate (PET). The continuous discharge and the increasing number of MP in the environment can pose greater hazards and harmful effects on humans and other living organisms. Despite the growing number of publications in relation to MP, further studies are needed to define concrete regulations and management strategies for mitigating the detrimental effects of MP in the environment.

• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.669-675
• /
• 2010

One of the greatest challenges for our society is providing powerful electrochemical energy conversion and storage devices. Rechargeable lithium-ion batteries and fuel cells are among the most promising candidates in terms of energy and power density. As the starting material, $TiCl_4{\cdot}YCl_3$ solution and dispersing agent (HCP) were mixed and synthesized using ammonia as the precipitation agent, in order to prepare the nano size Y doped spherical $TiO_2$ precursor. Then, the $Li_4Ti_5O_{12}$ was synthesized using solid state reaction method through the stoichiometric mixture of Y doped spherical $TiO_2$ precursor and LiOH. The Ti mole increased the concentration of the spherical particle size due to the addition of HPC with a similar particle size distribution in a well in which $Li_4Ti_5O_{12}$ spherical particles could be obtained. The optimal synthesis conditions and the molar ratio of the Ti 0.05 mol reaction at $50^{\circ}C$ for 30 minutes and at $850^{\circ}C$ for 6 hours heat treatment time were optimized. $Li_4Ti_5O_{12}$ was prepared by the above conditions as a working electrode after generating the Coin cell; then, electrochemical properties were evaluated when the voltage range of 1.5V was flat, the initial capacity was 141 mAh/g, and cycle retention rate was 86%; also, redox reactions between 1.5 and 1.7V, which arose from the insertion and deintercalation of 0.005 mole of Y doping is not a case of doping because the C-rate characteristics were significantly better.

• Applied Biological Chemistry
• /
• v.32 no.1
• /
• pp.23-29
• /
• 1989

Biochemical consequence of the accumulation in cells of superoxide $(O^{-}_{2})$ which was proposed to be probably a common chemical factor in the secondary process of the mechanism of chilling injury as well as in the visible light photodamage in cells of higher plants, has been investigated in the present work. Especially focused was the destructive effect of $O^{-}_{2}$ on the biochemical activity of mitochondria, as informations which support the suggestion that mitochondrial inner membrane is the major site of $O^{-}_{2}$ production have been collected. Mitochondria and submitochondrial particles (SMP) were prepared from soybean hypocotyls for this case study. When SMP were treated with the electrolytically produced $O^{-}_{2}$ they suffered not only inhibition of the membrane-bound enzymes as demonstrated by cytochrome c oxidase, but also lipid peroxidation of membrane as proved by malondialdehyde production. Malate dehydrogenase present in the protein extract from mitochondrial matrix was also inhibited by the $O^{-}_{2}$ treatment. These results exhibited the chaotic effect of the overproduction and accumulation of $O^{-}_{2}$ in cells under a certain abnormal circumstance such as environmental stress on the physiological function of mitochondrial; disruption of the cellular metabolic pathways and the structural integrity of membrane.

• Food Science of Animal Resources
• /
• v.37 no.1
• /
• pp.123-133
• /
• 2017

The development of a new manufacturing process, a two-step temperature treatment, to modulate the physicochemical properties of nanoparticles including the size is critical. This is because its physicochemical properties can be key factors affecting the cellular uptake and the bioavailability of bioactive compounds encapsulated in nanoparticles. The aims of this study were to produce (beta-lactoglobulin) ${\beta}-lg$ nanoparticles and to understand how two-step temperature treatment could affect the formation and physicochemical properties of ${\beta}-lg$ nanoparticles. The morphological and physicochemical properties of ${\beta}-lg$ nanoparticles were determined using atomic force microscopy and a particle size analyzer, respectively. Circular dichroism spectroscopy was used to investigate the secondary structure of ${\beta}-lg$. The surface hydrophobicity and free thiol groups of ${\beta}-lg$ were increased with a decrease in sub-ambient temperature and an increase in mild heat temperature. As sub-ambient temperature was decreased, a decrease in ${\alpha}-helical$ content and an increase in ${\beta}-sheet$ content were observed. The two-step temperature treatment firstly involved a sub-ambient temperature treatment from 5 to $20^{\circ}C$ for 30 min, followed secondly by a mild heat temperature treatment from 55 to $75^{\circ}C$ for 10 min. This resulted in the production of spherically-shaped particles with a size ranging from 61 to 214 nm. Two-way ANOVA exhibited the finding that both sub-ambient and mild heat temperature significantly (p<0.0001) affected the size of nanoparticles. Zeta-potential values of ${\beta}-lg$ nanoparticles were reduced with increasing mild heat temperature. In conclusion, two-step temperature treatment was shown to play an important role in the manufacturing process - both due to its inducement of the conformational changes of ${\beta}-lg$ during nanoparticle formation, and due to its modulation of the physicochemical properties of ${\beta}-lg$ nanoparticles.

• Korean Journal of Plant Resources
• /
• v.8 no.3
• /
• pp.237-246
• /
• 1995

In this study, the callus was induced and regenerated from the immature embryo and ultrastructural characteristics of developmental stages in Citrus junos SIEB, were investigated. The yellowish callus was induced by 5 to 6 week of culture of citrus. In proliferation callus after 6 weeks of culture, large vacuole was formed by fusion between adjacent small ones. In the non-embryogenic callus cultured for 12weeks, re-differentiated cells of callus showed the large nucleus with globular nucleus and amyloplast with large size of starches. In the embryogenic callus cltured for 14-16 weeks, the active exocytosis occurred in cells, secretory vesicles appeared on cell membrane and small particles from cytoplasm were released to intercelluar space. In the embryogenic callus cultured for 24 weeks, a sperical type of chloroplast bounded on cytoplasm by double membrane and typical grana was dispersed equally among matrix. In the normal plantlet after 26 weeks of culture, a lot of vessels and companion cells apperaed in the leaf cell of plantlet. In the normal plantlet after 30 weeks of culture, the immature leaf showed many small companion cells, sieve tubes and central vacuole. Also, the secondary vacuole protruded into the central vacuole and elongated chloroplasts near plasma membrane. In the matured plant habituated on the soil, palisada tissue composed of orderly arranged cells contained the nucleus in the center of the cell and large vacuoles on either side of the nucleus.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1112-1118
• /
• 2009

In the present study, the effects of muddy water were compared and examined on the fish inhabiting Imha reservoir, E. erythropterus, H. labeo and Z. platypus in Cypriniformes, S. asotus in Siluriformes and S. scherzeri in Perciformes. In the gills of fish in muddy water, the secondary lamellae of fish in Cypriniformes showed more irregular gaps and more winding than those in Siluriformes and Perciformes. Also, the edema and detachment of epithelial cells was more detected in the gills in Cypriniformes, but clubbing was frequently detected in Perciformes and Siluriformes. Also, we found that muddy debris and minute particles attached to lamellae were frequently detected in Perciformes and Cypriniformes. The glomerulus in the kidney was much more constricted in Z. platypus in Cypriniformes. As a result, it is proposed that fish in Cypriniformes are more affected by muddy water. In the changes of blood components, which might be affected by muddy water, the concentrations of TP, ALB, TG, CHOL and A/G ratio, were high in Cypriniformes, and inorganic matters were abundant in Siluriformes. In addition, AST activity was relatively higher than ALT and both activities were higher in Cypriniformes than in Siluriformes. Taken together, the change in blood plasma may be caused by the reduction in voracity in the wake of muddy water, which results in tissue damage.

• Journal of Environmental Science International
• /
• v.27 no.7
• /
• pp.597-610
• /
• 2018

This study observed particulate matter ($PM_{2.5}$ and $PM_{10}$) in the downtown area of Jeju City, South Korea, to understand the chemical composition of particulates based on an analysis of the water-soluble ionic species contained in the particles. The mass fraction of the ionic species in the sampled $PM_{10}$ and $PM_{2.5}$ was 44.3% and 42.2%, respectively. In contrast, in Daegu City and Suwon City, the mass fraction of the ionic species in $PM_{2.5}$ was higher than that in $PM_{10}$. The chloride depletion percentage of $PM_{10}$ and $PM_{2.5}$ in Jeju City was higher than 61% and 66%, respectively. The contribution of sea-salt to the mass of $PM_{10}$ (5.9%) and $PM_{2.5}$ (2.6%) in Jeju City was similar to that in several coastal regions of South Korea. The mass ratio of $Cl^-$ to $Na^+$ in the downtown area of Jeju City was comparable to that in some coastal regions, such as the Gosan Area of Jeju Island, Deokjeok Island, and Taean City. The mass fraction of sea-salt in $PM_{10}$ and $PM_{2.5}$ was very low, and the concentration of sodium and chloride ions in $PM_{10}$ was not correlated with those in $PM_{2.5}$ ($R^2$ < 0.2), suggesting that the effects of sea-salt on the formation of particulate matter in Jeju City might be insignificant. The relationship between $NH_4{^+}$ and several anions such as $SO_4{^{2-}}$, $NO_3{^-}$, and $Cl^-$, as well as the relationship between the measurement and calculation of ammonium ion concentration, suggested that sea-salts may not react with $H_2SO_4$, and $(NH_4)_2SO_4$ may be a major secondary inorganic aerosol component of $PM_{2.5}$ and $PM_{10}$ in Jeju City.

• Resources Recycling
• /
• v.29 no.5
• /
• pp.28-37
• /
• 2020

In this study, the effect of precipitation temperature, ammonium chloride amount and addition method, vanadium and sodium hydroxide content of the solution on the precipitation of ammonium metavanadate were examined by using the sodium vanadate(NaVO₃) solution in alkali region as a starting material. As the pH of solution decreased, the addition amount of ammonium chloride and the vanadium content of the solution increased, the precipitation rate of ammonium metavanadate increased. In this research condition, the basic conditions for obtaining more than 90% of precipitation yield were 10,000mg/L of vanadium content, 2equivalents of ammonium chloride addition, room temperature, and 2 hours of precipitation time. The size of precipitated particles decreased with increasing precipitation rate. Especially when liquid ammonium chloride was injected into the solution, the precipitation rate was the slowest and the particle size of the precipitate was the largest. After the primary precipitation by adding ammonium chloride as a solid, the secondary precipitation was carried out by adding new reactants. At this time, the precipitation with added ammonium chloride solid was not affected by the precipitates present in the solution. However, when liquid ammonium chloride was added, new precipitate was deposited on the surface of the precipitate present in the solution, increasing its size. Due to the difference in ammonium metavanadate solubility to temperature, the precipitation temperature at the vanadium content of 10,000mg/L in the solution affected the precipitation rate of ammonium metavanadate and the precipitation temperature did not affect the precipitation rate at a high concentration of more than 30,000mg/L vanadium content in the solution.

• Journal of Environmental Science International
• /
• v.28 no.4
• /
• pp.413-422
• /
• 2019

The objective of this study was to estimate the trends of air quality in the study area by analyzing monthly and seasonal concentration trends obtained from sampled data. To this aim, the mass concentrations of $PM_{2.5}$ in the air were analyzed, as well as those of metals, ions, and total carbon within the $PM_{2.5}$. The mean concentration of $PM_{2.5}$ was $22.7{\mu}g/m^3$. The mass composition of $PM_{2.5}$ was as follows: 31.1% of ionic species, 2.2% of metallic species, and 26.7% of carbonic species (EC and OC). Ionic species, especially sulfate, ammonium, and nitrate, were the most abundant in the $PM_{2.5}$ and exhibited a high correlation coefficient with the mass concentration of $PM_{2.5}$. Seasonal variations of $PM_{2.5}$ showed a similar pattern to those of ionic and metallic species, with high concentrations during winter and spring. $PM_{2.5}$ also had a high correlation with the ionic species $NO_3{^-}$ and $NH_4{^+}$. In addition, $NH_4{^+}$ was highly correlated with $NO_3{^-}$. Through factor analysis, we identified four controlling factors, and determined the pollution sources using the United States Environmental Protection Agency(U.S. EPA) pollution profile. The first factor, accounting for 19.1% of $PM_{2.5}$ was attributed to motor vehicles and heating-related sources: the second factor indicated industry-related sources and secondary particles, and the other factors indicated soil, industry-related and marine sources. However, the pollution profile used in this study may be somewhat different from the actual situation in Korea, since it was obtained from US EPA. Therefore, to more accurately estimate the pollutants present in the air, a pollution profile for Korea should be produced.