• Journal of Korean Foot and Ankle Society
• /
• v.23 no.3
• /
• pp.110-115
• /
• 2019

Purpose: This study analyzed the clinical and radiological results of Reudi-Allgower type II and III open tibia pilon fracture patients who underwent plate fixation after the recovery of a soft tissue injury after external fixation. Materials and Methods: From 2010 to 2015, this study analyzed 14 patients who were treated for open tibial pilon fractures and could be followed up at least one year. The mean age was 49 years and the average follow-up period was 19 months. An emergency operation was performed for external fixation and open wounds, and secondary surgery was performed for definitive fixation using a plate. The radiological and clinical evaluations were analyzed retrospectively. Complications, such as post-traumatic osteoarthritis and wound infections were also analyzed. Results: The mean duration between two-staged surgery was 21 days and the mean bone union time was 9.2 months. Three cases of delayed union and one case of nonunion were reported. The malunion did not occur in all cases. The average American Orthopaedic Foot and Ankle Society (AOFAS) score was 68 points. A limitation of the ankle motion occurred in all cases. In four cases, wound infections due to initial open wounds occurred; one patient underwent a below the knee amputation due to chronic osteomyelitis. Post-traumatic arthritis occurred in 10 cases. Conclusion: Severe comminuted tibial plateau open fractures of Reudi-Allgower type II and III, which are high-energy injuries that result in extensive soft tissue damage, have a higher incidence of complications, such as ulcer problems and osteomyelitis, than closed tibia plateau fractures. Post-traumatic arthritis is the most common complication of tibia plateau open fractures, and staged surgery is recommended because of the relatively satisfactory clinical results.

• Journal of Internet Computing and Services
• /
• v.9 no.6
• /
• pp.117-125
• /
• 2008

With increase of concern about the Ubiquitous application, the necessity of the computer system which is miniaturized is becoming larger. The ARM processor is showing a high share from embedded system market. In this paper, ideal method for RTD-1000 controller construction and development is described using ARM microcontroller. Existing RTD-1000 measures distance of disconnection or defect of sensing casket by measuring receiving reflected wave which was sent via copper wire inside the leaking sensing rod. Using this RTD-1000, leakage and breakage of water and oil pipe can be sensed and it reports damage results to the networks. But, existing RTD-1000 wastes hardware resources much and costs a great deal to installation. Also, it needs a cooling device because the heating problem, and has some problem of the secondary memory unit such as the hard disk. So, long tenn maintenance has some problems in the outside install place. In this paper, for the resolving the problem of RTD-1000, RTD-1000A embedded system based on ARM is proposed and simulated.

• Journal of the Society of Disaster Information
• /
• v.11 no.2
• /
• pp.219-225
• /
• 2015

Hydrofluoric acid leakage accident was occurred on Dec. 2012 in Hube Global. That accident has bought many changes of response in national organizations. Chemical companies respond quickly even when small quantities leakage of chemicals and response agencies were put a lot of manpower and equipment in incident response. Incident response to the response activities of the agents is difficult if the accident substance was not identified. Unknown chemicals can be generated by the water for fire-fighting during the emergency response process. In this case, an additional information was needed for response of chemical accident to prevent of great damage. In this study, we investigated the improvement of chemical accident information by extraordinary chemical accident.

• Journal of fish pathology
• /
• v.9 no.2
• /
• pp.157-168
• /
• 1996

In this study, Residue of formaldehyde and histopathological changes in formalin and neutralformalin in treated fish(Sebastes schlegeli) were observed at two different temperatures(15 and $25^{\circ}C$). Immediately after in treatment, residue of formaldehyde in formalin treated fish was show little bit higher than in neutral-formalin treated fish at $15^{\circ}C$. But, there is no difference at water temperature $25^{\circ}C$. The elimination of formaldehyde was markedly temperature-dependent. The approximated withdrawal time were 72hr and 24hr at water temperature 15 and $25^{\circ}C$. Formalin was more toxic than the neutral-formalin at the same condition. Intensity of tissues damage was increased with increasing concentration of chemical and temperature. Formalin and neutral-formalin treatments caused edema and seperation of epithelium, winding of secondary gill lamella, necrosis in the gill ; congestion and pycnosis, vacuolation in the liver ; hydropic and granulated degeneration, necrosis of epithelial cells in the proximal renal tubule ; increasing mucus cells, cracking, necrosis of epidermis and dermis in the skin tissue.

• Convergence Security Journal
• /
• v.10 no.4
• /
• pp.31-37
• /
• 2010

The risks and threats in IT security systems to protect, prevent damage and Risk should be minimized. Context of information security products such as information processing, storage, delivery, and in the process of information system security standards, That is the basic confidentiality, availability, integrity and secondary clarity, potential evidence, detection, warning and defense capabilities, to ensure sufficient and should be. Web services are the most important elements in the security, the web nature of port 80 for the service to keep the door open as a structure, Web applications, web sources and servers, networks, and to hold all the elements are fundamental weaknesses. Accordingly, these elements through a set of Web application development errors and set-up errors and vulnerabilities in Web applications using their own home pages and web servers to prevent hacking and to improve the efficiency of Web services is proposed methodology performs security BMT.

• Korean Journal of Remote Sensing
• /
• v.36 no.4
• /
• pp.627-635
• /
• 2020

With the increasing severity of climate change, intense torrential rains are occurring more frequently globally. Flooding due to torrential rain not only causes substantial damage directly, but also via secondary events such as landslides. Therefore, accurate and prompt flood detection is required. Because it is difficult to directly access flooded areas, previous studies have largely used satellite images. Traditionally, water indices such asthe normalized difference water index (NDWI) and modified normalized difference water index (MNDWI) which are based on different optical bands acquired by satellites, are used to detect floods. In addition, as flooding likelihood is greatly influenced by the weather, synthetic aperture radar (SAR) images have also been used, because these are less influenced by weather conditions. In this study, we compared flood areas calculated from SAR images and water indices derived from Landsat-8 images, where the images were acquired at similar times. The flooded area was calculated from Landsat-8 and Sentinel-1 images taken between the end of May and August 2019 at Lijiazhou Island, China, which is located in the Changjiang (Yangtze) River basin and experiences annual floods. As a result, the flooded area calculated using the MNDWI was approximately 21% larger on average than that calculated using the NDWI. In a comparison of flood areas calculated using water indices and SAR intensity images, the flood areas calculated using SAR images tended to be smaller, regardless of the order in which the images were acquired. Because the images were acquired by the two satellites on different dates, we could not directly compare the accuracy of the water-index and SAR data. Nevertheless, this study demonstrates that floods can be detected using both optical and SAR satellite data.

• Korean Journal of Veterinary Service
• /
• v.40 no.2
• /
• pp.101-105
• /
• 2017

The purpose of this study was to investigate prevalence and antimicrobial resistance patterns of Campylobacter spp. from duck feces in northern area of the Gyeongnam province, Korea. Samples of 121 duck feces were taken from April to December 2014 for this survey. Samples were examined by bacteria isolation and reverse transcriptase-polymerase chain reaction assay for detection of Campylobacter spp. Campylobacter were isolated in 37 samples (30.6%). Among these samples, C. jejuni and C. coli were isolated in 35 samples and 2 samples, respectively. Minimum inhibitory concentration (MIC) test is performed to investigate antimicrobial resistance patterns of Campylobacter spp. C. jejuni were resistant to ciprofloxacin (85.7%), nalidixic acid(82.9%), tetracycline (77.1%), gentamicin (57.1%), azithromycin (40.0%), clindamycin (34.3%), erythromycin (22.9%), and florfenicol (8.6%). These data support a database of pollution and antimicrobial resistance of Campylobacter spp. from duck feces and provide a basic information of reducing the secondary damage of antibiotic misuse.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.6
• /
• pp.987-996
• /
• 2018

Bacterial programmed cell death is regulated by the toxin-antitoxin (TA) system. YhaV (toxin) and Pr1F (antitoxin) have been recently identified as a type II TA system in Escherichia coli. YhaV homologs have conserved active residues within the C-terminus, and to characterize the function of this region, we purified native YhaV protein (without denaturing) and constructed YhaV proteins of varying lengths. Here, we report a new low-temperature method of purifying native YhaV, which is notable given the existing challenges of purifying this highly toxic protein. The secondary structures and thermostability of the purified native protein were characterized and no significant structural destruction was observed, suggesting that the observed inhibition of cell growth in vivo was not the result of structural protein damage. However, it has been reported that excessive levels of protein expression may result in protein misfolding and changes in cell growth and mRNA stability. To exclude this possibility, we used an [$^{35}S$]-methionine prokaryotic cell-free protein synthesis system in vitro in the presence of purified YhaV, and two C-terminal truncated forms of this protein (YhaV-L and YhaV-S). Our results suggest that the YhaV C-terminal region is essential for mRNA interferase activity, and the W143 or H154 residues may play an analogous role to Y87 of RelE.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.287-298
• /
• 2020

The purpose of this study was to identify the current situation of safety accident received by Korea Consumer Agency and to provide a basis for preparing measures to prevent safety accident. This study was a descriptive study that secondary analyzes 4934 safety accidents accident information received from Korea Consumer Agency from 2013 to 2017. In this study, safety accident occurred more frequently woman, between 50-59 years old, the cause of safety accident were adverse effect after medical procedure(42.4%), the place where safety accident occurred private hospital(28.6%), integumentary system(41.3%) where safety accident occurred, symptoms of safety accident caused other organ damage and pain(13.1%) occurred most frequently and characteristics of safety accident differed depending on place of safety accident. Based on the results of this study, it is suggested to established a surveillance system that can prevent safety accident in which medical problems occur.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.10
• /
• pp.1-10
• /
• 2000

A rigorous modeling of ultra-low energy implantation is becoming increasingly more important as devices shrink to deep submicron dimensions. In this paper, we have developed an efficient three-dimensional Monte Carlo ion implantation model based on a modified Binary Collision Approximation(BCA). To this purpose, the modified electronic stopping model and the multi-body collision model have been taken into account in this simulator. The dopant and damage profiles show very good agreement with SIMS(Secondary Ion Mass Spectroscopy) data and RBS(Rutherford Backscattering Spectroscopy) data, respectively. Moreover, the ion distribution replica method has been implemented into the model to get a computational efficiency in a 3D simulation, and we have calculated the 3D Monte Carlo simulation into the topographically complex structure.