• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1998.10a
• /
• pp.2-4
• /
• 1998

Proliferation of Nocardia amarae cells in activated sludge has often been associated with the generation of nuisance foams. Despite intense research activities in recent years to examine the causes and control of Nocardia foaming in activated sludge, the foaming continued to persist throughout the activated sludge treatment plants in United States. In addition to causing various operational problems to treatment processes, the presence of Nocardia may have secondary effects on the fate of heavy metals that are not well known. For example, for treatment plants facing more stringent metal removal requirements, potential metal removal by Nocardia cells in foaming activated sludge would be a welcome secondary effect. In contrast, with new viosolid disposal regulations in place (Code o( Federal Regulation No. 503), higher concentration of metals in biosolids from foaming activated sludge could create management problems. The goal of this research was to investigate the metal sorption property of Nocardia amarae cells grown in batch reactors and in chemostat reactors. Specific surface area and metal sorption characteristics of N. amarae cells harvested at various growth stages were compared. Three metals examined in this study were copper, cadmium and nickel. Nocardia amarae strain (SRWTP isolate) used in this study was obtained from the University of California at Berkeley. The pure culture was grown in 4L batch reactor containing mineral salt medium with sodium acetate as the sole carbon source. In order to quantify the sorption of heavy metal ions to N amarae cell surfaces, cells from the batch reactor were harvested, washed, and suspended in 30mL centrifuge tubes. Metal sorption studies were conducted at pH 7.0 and ionlc strength of 10-2M. The sorption Isotherm showed that the cells harvested from the stationary and endogenous growth phase exhibited significantly higher metal sorption capacity than the cells from the exponential phase. The sequence of preferential uptake of metals by N. amarae cells was Cu>Cd>Ni. The specific surFace area of Nocardia cells was determined by a dye adsorption method. N.amarae cells growing at ewponential phase had significantly less specific surface area than that of stationary phase, indicating that the lower metal sorption capacity of Nocardia cells growing at exponential phase may be due to the lower specific surface area. The growth conditions of Nocardia cells in continuous culture affect their cell surface properties, thereby governing the adsorption capacity of heavy metal. The comparison of dye sorption isotherms for Nocardia cells growing at various growth rates revealed that the cell surface area increased with increasing sludge age, indicating that the cell surface area is highly dependent on the steady-state growth rate. The highest specific surface area of 199m21g was obtained from N.amarae cell harvested at 0.33 day-1 of growth rate. This result suggests that growth condition not only alters the structure of Nocardia cell wall but also affects the surface area, thus yielding more binding sites of metal removal. After reaching the steady-state condition at dilution rate, metal adsorption isotherms were used to determine the equilibrium distributions of metals between aqueous and Nocardia cell surfaces. The metal sorption capacity of Nocardia biomass harvested from 0.33 day-1 of growth rate was significantly higher than that of cells harvested from 0.5- and 1-day-1 operation, indicatng that N.amarae cells with a lower growth rate have higher sorpion capacity. This result was in close agreement with the trend observed from the batch study. To evaluate the effect of Nocardia cells on the metal binding capacity of activated sludge, specific surface area and metal sorption capacity of the mixture of Nocardia pure cultures and activated sludge biomass were determined by a series of batch experiments. The higher levels of Nocardia cells in the Nocardia-activated sludge samples resulted in the higher specific surface area, explaining the higher metal sorption sites by the mixed luquor samples containing greater amounts on Nocardia cells. The effect of Nocardia cells on the metal sorption capacity of activated sludge was evaluated by spiking an activated sludge sample with various amounts of pre culture Nocardia cells. The results of the Langmuir isotherm model fitted to the metal sorption by various mixtures of Nocardia and activated sludge indicated that the mixture containing higher Nocardia levels had higher metal adsorption capacity than the mixture containing lower Nocardia levels. At Nocardia levels above 100mg/g VSS, the metal sorption capacity of activate sludge increased proportionally with the amount of Noeardia cells present in the mixed liquor, indicating that the presence of Nocardia may increase the viosorption capacity of activated sludge.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.363-369
• /
• 2009

This study was carried out to investigate the effect of ${NO_3}^-$ and ${NH_4}^+$ on the adventitious root growth and eleuthroside synthesis of Eleutherococcus koreanum in 5 L-bioreactor culture. The change in the medium components was also measured during culture. The fresh weignt of adventitious root reached to the highest level of 30.8 g FW/L in the presence of both 50 mM ${NO_3}^-$ and 10 mM $NH_4^+$, representing 3.6-fold increase compared to the 60 mM ${NH_4}^+$ alone. However, as the increase of the portion of ${NH_4}^+$, the root growth was decreased. However, the maximum eleutheroside B, E and E1 contents were $57.3{\mu}g/g$ DW, $188.4{\mu}g/g$ DW and $47.3{\mu}g/g$ DW, with 30 mM, 60 mM and 15 mM total nitrogen source, respectively. Fresh weight of adventitious root increased up to 6.8-fold of inoculum size within 9 weeks. The amounts of ${NH_4}^+$, $K^+$, ${NO_3}^-$ and ${PO_4}^-$ were decreased during culture periods. Based on these results, we suggest that various further studies are required to increase the biomass and the useful secondary metabilites.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.381-393
• /
• 2014

Seismic reflection data are integrated with fieldwork data in order to understand startigraphy, structural geology and hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, Northeastern Iraq. Cretaceous strata in the basin divided into the Qamchuqa, Kometan, Bekhme and Shiranish formations, which are composed of carbonates deposited in shallow marine environment. The geological structures in these formations are mainly recognized as thrusts, detachment folds, fault propagation folds and fault bend folds. As well, NW-SE trending fractures are regularly developed, and are horizontal or perpendicular to the structures. The distribution and frequency of fractures are related to the development of the thrusts. In terms of hydrocarbon potentials, Cretaceous strata in the basin have limited capacities for source rocks and seal rocks due to the lack of organic carbon content and the well-developed fractures, respectively. Although these carbonates have limited primary porosity, however, development of the secondary porosity derived from the fractures contributes to enhance the reservoir quality. Most important factor for the reservoir quality of Cretaceous strata seems to be the frequency and connectivity of fractures relative to locations of folds and faults. The results delineated in this study will use as reference for recognizing stratigraphy and structures of Cretaceous strata and will provide useful information on hydrocarbon potentials of Cretaceous strata in the Mesopotamian basin, NE Iraq.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5601-5609
• /
• 2012

The fine particulate matter($PM_{10}$) concentrations and contents were measured to check the health and environment influential factors in Pohang Iron and Steel Industrial Complex and its vicinities. In addition, the $PM_{10}$ distribution for each year and season was surveyed using the regional air quality monitoring stations. The measuring on the $PM_{10}$ inside the industrial complex showed $61.3{\pm}12.1{\mu}g/m^3$ for average concentration of $PM_{10}$ which was measured by Dongil Industry and $44.3{\pm}8.1{\mu}g/m^3$ measured by steel manufacturing industry complex management office. Both of them satisfied the environmental air quality standard. The percentage of $SO_4{^2}$, $NO_3{^-}$, $NH_4{^+}$ which are the secondary ions created out of the $PM_{10}$ in Dongil Industry and steel manufacturing industry complex management office was checked and it was revealed that the percentage of ${SO_4}^{2-}$ was high and it is considered that the pollution source related with the sulfides exist at the industrial complex. They were in order of ${SO_4}^{2-}$ > $Cl^-$ > $NO_3{^-}$ > $F^-$ > $NH_4{^+}$ in Dongil Industry and ${SO_4}^{2-}$ > $Cl^-$ > $NO_3{^-}$ > $NH_4{^+}$ > $F^-$ in steel manufacturing industry complex management office.

• Microbiology and Biotechnology Letters
• /
• v.37 no.2
• /
• pp.140-146
• /
• 2009

Cyclosporin, an immunosuppressant, is a representative group of biologically active secondary metabolites produced by the fungus Tolypocladium inflatum. The amount and ratio of cyclosporin derivatives in the culture broth are an important factors for the production of cyclosporin A and the purification in the industrial process. Therefore, we studied the effect of amino acids and complex organic nitrogen sources using Tolypocladium inflatum mutants on the productivity of cyclosporin A and the ratio of cyclosporin derivatives. Overproducing mutant YHC-004 having seven times higher productivity than mother strain's could be obtained through the artificial mutation by UV irradiation. The concentration and kind of organic nitrogens and amino acids shows the profound effect on the productivity of cyclosporin A and ratio of cyclosporin derivatives. As a result, it was possible to raise the productivity and the ratio of cyclosporin A up to 3,430 mg/L and 93% respectively, but on the other hand the other cyclosporin derivatives decreased less than 2% in the culture broth.

• Journal of Environmental Science International
• /
• v.12 no.7
• /
• pp.735-744
• /
• 2003

The field observations on a seasonal characteristic of organic matter and its origin in the surface sediment were carried out at 35 stations in Deukryang bay, southern coast of Korean Peninsula from May 1995 to February 1996. The analytical parameters were mud temperature, ignition loss(IL), chemical oxygen demand(COD), pheopigment, sulfide and water content. The origin and seasonal dynamics of organic matter in Deukryang Bay were analyzed by COD/IL, COD/sulfide ratio and principal component analysis(PCA). As a results of the mud temperature fluctuated between 2.1$^{\circ}C$ with the lowest mean 4.6$^{\circ}C$ in winter and 27.6$^{\circ}C$ with the highest mean 25.5$^{\circ}C$ in summer. The range of ignition loss(IL) was from 3.1% in autumn to 21.5% in winter. Chemical oxygen demand(COD) showed the highest mean value of 8.45 mg/g dry in spring within the range of 2.90∼18.21 mg/g dry, while it showed the lowest value of 4.33 mg/g dry in autumn within the range of 0.67∼10.37 mg/g dry. Pheopigments showed the highest mean value of 9.04 $\mu\textrm{g}$/g dry in autumn within the range of 1.36∼20.44 $\mu\textrm{g}$/g dry, while it did the lowest mean value of 2.20 $\mu\textrm{g}$/g dry in summer within the range of 0.33∼11.36 $\mu\textrm{g}$/g dry. The range of total sulfide (H$_2$S) was from no detect(ND) to 3.30 mg/g dry in spring. And water content showed the annual mean value of 43.6% within the range of 23.6∼54.9%. The source of organic matter by COD/IL and COD/sulfide ratio in Deukryang Bay had been producted by primary producer in sea water areas except the areas effected by small stream, domestic and animal wastes. And the analytical results of PCA was able to be divided into three different regions. The former was characterized by the shallow depth and authigenic organic matter from phytoplankton in northwest area and northeastern inner bay, the secondary was done by deeper depth and allochthonous one from lands in southeast area and eastern entrance of bay, and the latter was done by authigenic one from the farm of seaweeds such as, sea cabbage, sea mustard etc in western entrance of bay. But a study on the relationship between sulfide and COD concentration in the northeastern inner bay which was characterized by the water stagnation will to take much more studying including major constituents of organic matter in the future.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.281-287
• /
• 2009

An eruption failure can be observed for child and adolescent periods when the primary dentition is changed to the permanent dentition through the mixed dentition frequently. The eruption failure can lead to miss erupting times of the tooth, then it will cause a lot of problems including root resorption, esthetic problem, transposition of adjacent tooth, malocclusoin and etc. Especially, the maxillary first molar is importantly concerned with occlusion and growth and is an essential tooth for development and maintenance of occlusion. So, it is a momentous part of more proper occlusal management to find these abnormal cases at the early stage and solve the problems. The sorts of eruption failures of the maxillary first molars can be divided into delayed eruption, impaction and the primary retention and the secondary retention. When physical obstacles cause impaction, first of all they must be removed then we can treat the impaction with observation after removal, surgical exposure or orthodontic traction. If the source of impaction is an ectopic eruption, the treatment can be a brasswire, a pendulum appliance, a space maintainer or space regainer after the extraction of the second deciduous tooth and etc. These cases are made a diagnosis of eruption failures of the maxillary first molars in mixed dentition period and have good prognosises after my treatments. So I reported them.

• Journal of Environmental Health Sciences
• /
• v.46 no.1
• /
• pp.35-44
• /
• 2020

Objectives: The purpose of this study was to compare the health status of residents who were exposed to the Iksan industrial area in the living environment and those who were not exposed to such a source of industrial activity through a questionnaire survey designed to appraise the residents' health levels. Method: The authors conducted a health questionnaire survey of 1,012 residents around Iksan regarding their personal information, physician-diagnosed disease history, odors experienced, and more. Logistic regression was performed to identify the associations between hazardous chemical exposure and physician-diagnosed diseases. Result: Logistic regression shows significant differences in allergic rhinitis, cardiovascular disease, hypertension, dyslipidemia, liver disease, and osteoporosis. Odors were experienced by 88.0% of the survey group. The seasons were summer (71%) and spring (24.9%). Conclusion: For allergic rhinitis, cerebral cardiovascular disease, and hypertension, which were significantly higher in the case group than in the control group in the disease diagnosis and disease treatment history of physicians, it was difficult to completely eliminate the association with odor exposure in the Iksan Industrial Complex. It is considered that it has affected nearby residents. This study means that a correlation between chronic diseases has been found through regression analysis, and furthermore, this result can be used as a basis for sampling for secondary epidemiological surveys.

• KSBB Journal
• /
• v.16 no.1
• /
• pp.87-94
• /
• 2001

The biosynthesis of Lovastatin, a cholesterol lowering agent formed by the filamentous fungus, cerulenin-resistant Aspergillus terreus mutant was studied in shake flasks and bioreactors. The lovastatin production could be improved by fed-batch under the limited condition of carbon source. The relationship between the fungal morphology and the lovastatin production was also examined during the fed-batch cultures. The fed-batch studies in shake flasks were carried out to find the optimum glucose feeding method, and the pulsed feeding of glucose from 3 days onward at 24 hours intervals was found to be optimal to increase the lovastatin production and reduce the average pellet size. When the pH was controlled at around 5.8 during the whole fermentation period, the lovastatin concentration reached 384 mg/L, which is much higher than the values obtained pH-uncontrolled and pH 7.4. The optimal glucose feeding strategies was found that 30 g/L of glucose was added initially in batch mode, and then fed-batch was conducted by continuous addition of glucose solution(180 g/L) from 72 to 240 hr at a rate of 1.2 mL/hr at $28^{\circ}C$, pH 5.8, 400 rpm, and 1.0 vvm. The lovastatin concentration of 547 mg/L was obtained in 168 hr. It was about 1.5 times higher than the value of the batch fermentation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.663-666
• /
• 2005

Gas hydrates are ice-like compounds that form at the low temperature and high pressure conditions common in shallow marine sediments at water depths greater than 300-500 m when concentrations of methane and other hydrocarbon gases exceed saturation. Estimates of the total mass of methane carbon that resides in this reservoir vary widely. While there is general agreement that gas hydrate is a significant component of the global near-surface carbon budget, there is considerable controversy about whether it has the potential to be a major source of fossil fuel in the future and whether periods of global climate change in the past can be attributed to destabilization of this reservoir. Also essentially unknown is the interaction between gas hydrate and the subsurface biosphere. ODP Leg 204 was designed to address these questions by determining the distribution, amount and rate of formation of gas hydrate within an accretionary ridge and adjacent basin and the sources of gas for forming hydrate. Additional objectives included identification of geologic proxies for past gas hydrate occurrence and calibration of remote sensing techniques to quantify the in situ amount of gas hydrate that can be used to improve estimates where no boreholes exist. Leg 204 also provided an opportunity to test several new techniques for sampling, preserving and measuring gas hydrates. During ODP Leg 204, nine sites were drilled and cored on southern Hydrate Ridge, a topographic high in the accretionary complex of the Cascadia subduction zone, located approximately 80km west of Newport, Oregon. Previous studies of southern Hydrate Ridge had documented the presence of seafloor gas vents, outcrops of massive gas hydrate, and a pinnacle' of authigenic carbonate near the summit. Deep-towed sidescan data show an approximately $300\times500m$ area of relatively high acoustic backscatter that indicates the extent of seafloor venting. Elsewhere on southern Hydrate Ridge, the seafloor is covered with low reflectivity sediment, but the presence of a regional bottom-simulating seismic reflection (BSR) suggests that gas hydrate is widespread. The sites that were drilled and cored during ODP Leg 204 can be grouped into three end-member environments basedon the seismic data. Sites 1244 through 1247 characterize the flanks of southern Hydrate Ridge. Sites 1248-1250 characterize the summit in the region of active seafloor venting. Sites 1251 and 1252 characterize the slope basin east of Hydrate Ridge, which is a region of rapid sedimentation, in contrast to the erosional environment of Hydrate Ridge. Site 1252 was located on the flank of a secondary anticline and is the only site where no BSR is observed.