• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.75-80
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by several boundary conditions. In this simulation, a high-order and high-resolution numerical schemes are used for the accurate computation of compressible flow with several boundary conditions including characteristic boundary conditions as well as extrapolation and zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated with measurement datum and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. Secondary frequency is predicted by three kinds of boundary conditions characteristic.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.251-255
• /
• 1997

The conventional high frequency phase-shifted full bridge dc/dc converter has a disadvantage that a circulating current flows through transformer and switching devices during the freewheeling interval. Due to this circulating current, RMS current stress, conduction losses of transformer and switching devices are increased. To alleviate this problem, this paper provides a circulating current free type high frequency soft switching phase-shifted full bridge (FB) dc/dc converter with energy recovery snubber (ERS) attached at the secondary side of transformer. The energy recovery snubber (ERS) adopted in this study is consisted of three fast recovery diode(Ds1, DS2, Ds3), two resonant capacitor (Cs1, Cs2)

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.70-78
• /
• 2015

Turbulent flow and heat transfer characteristics of textile machine are numerically investigated. To examine the influence of flow structures on the drying performance of fabrics, the nozzle shape of high temperature chamber is changed. For several nozzles, flow and heat transfer characteristics are discussed. The results show that the drying performance is improved by controlling the angle and arrangement of nozzles corresponding to different drying conditions. This feature is strongly related to the enhancement of turbulent fluctuations and secondary flows.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1631-1635
• /
• 2006

본 연구에서는 레이놀즈응력모형(RSM: Reynolds Stress Model)을 이용하여 사다리꼴 개수로 흐름을 수치모의 하였다. 측벽 경사에 따른 사다리꼴 개수로 흐름을 수치모의 하였으며 계산된 평균유속 분포는 기존의 실험 결과와 비교하였다. 그 결과 개발된 레이놀즈응력이 사다리꼴 개수로 흐름을 비교적 잘 예측하는 것으로 나타났다. 또한 사다리꼴 수로에서는 직사각형 개수로 흐름과 달리 velocity dip 현상이 발생하지 않는 것으로 나타났다. 특히 측벽 경사가 32..인 사다리꼴 수로에서의 평균유속 및 바닥 전단응력 분포는 측벽 경사가 큰 경우와 다른 형태의 평균유속 및 전단응력 분포가 형성되는 것으로 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.400-404
• /
• 2009

본 연구에서는 곧은 식생과 유연한 식생 및 다양한 수심비를 갖는 개수로 흐름 조건에 대한 수리실험을 실시하였다. 레이저 도플러 유속계를 이용하여 수로 전체 단면의 유속을 측정함으로써, 이차흐름이 평균유속 및 난류량에 미치는 영향을 분석할 수 있도록 하였다. 평균유속의 경우, 수치모의결과와 동일하게 측벽근처에서 최대 유속이 발생하였다. 유속측정자료를 이용하여 침수식생 개수로 흐름의 벡터도를 살펴본 결과, 침수식생 개수로의 경우 일반 개수로 흐름과는 달리 바닥 와 (bottom vortex)가 측벽 근처에서 매우 활발한 것으로 나타났으며, 이로 인해 수로 중앙의 높은 운동량을 가진 유체가 측벽방향으로 이동하고 있음을 확인하였다. 또한 측벽에서 이차흐름으로 인해 발생하는 강한 하강류가 레이놀즈응력 및 난류 강도의 수직방향 분포 형태에 영향을 미치는 것을 확인하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.480-486
• /
• 1995

Turbulent flow field in a subchannel of bare rod bundles has been numerically simulated using the control volume based finite element method. Launder & Ying model of Reynolds stress and Lam & Bremhorst low-Reynolds number model are implemented in k-$\varepsilon$ equations and momentum equations. Secondary flows are simulated using the stream function and vorticity approach. The control volume based finite element method enable to use the upwind scheme (donor cell scheme). Sensitivity of the constants in the models are studied, and proper values are found to get the close result to the measured flow distributions.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.42-48
• /
• 2004

Numerical simulation of viscous compressible flow in turbomachinery cascade involves many problems due to the complex geometry of blade but also flow phenomena. In the present study, numerical investigations have been performed to examine the three-dimensional flow characteristics inside the transonic linear turbine cascades using a commercial code, FLUENT. Multi-block H-type grids are applied to the high-turning turbine rotor blades and comparisons with the experimental data and the numerical results have been done. In addition, the effects of turbulence models on the prediction of the endwall flows are analyzed in the sense of the flow compressibility.

• 유체기계공업학회:학술대회논문집
• /
• 1998.12a
• /
• pp.33-41
• /
• 1998

In this study, the performance prediction programs for centrifugal pumps are developed. To estimate the losses in the centrifugal pump impellers, two-zone model and TEIS(two elements in series) model are applied to the program. The basic concept of two zone model considers the primary zone that is an isentropic core flow and the secondary zone that is non-isentropic region at the impeller exit. The flows through two different zones mixed out at the impeller exit and the mixing process occurs with an increase in entropy, a decrease in total pressure. The level of the core flow diffusion in a impeller was calculated using TEIS(two elements in series) model. The effects of various parameters which are used in this program on the prediction of head and efficiency are discussed. The correlation curves to select the effectiveness of the primitive TEIS model were suggested according to the specific speed of the centrifugal pumps.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.3
• /
• pp.404-412
• /
• 2008

As a suitable volute configuration in the range of low specific speed, circular casing is suggested in this study. The internal flows in a centrifugal pump with the circular and spiral casings are measured by PIV and analyzed by CFD. The results show that the head and efficiency of the pump by a circular casing of very small radius are almost same as those by the spiral casing. Even at the best efficiency point, the internal flow of the pump by circular casing is asymmetric, and vortex and strong secondary flow occurs in the impeller passage. The radial velocity becomes higher remarkably only near the region of the discharge throat. The flow in the impeller outlet is strongly controlled by the circular casing because the velocity distribution almost does not affected by the position of the impeller blades.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.403-406
• /
• 2006

An ejector is designed for the purpose of engine bay cooling. The primary flow of the ejector is the exhaust gas of the PW206C turboshaft engine. The mass flow of secondary flow is calculated by using the approximate analytic equation. For the purpose of verification of approximate analytic method, comparison is made with the results of Navier-Stokes turbulent flow solution. According to the results of CFD, the mixing of two flows is incomplete due to the short length of mixing duct.