• Transactions on Electrical and Electronic Materials
• /
• 제15권2호
• /
• pp.91-95
• /
• 2014

This paper presents the structure and process technology of simple and low-cost wafer-level packaging (WLP) for thin film radio frequency (RF) devices. Low-cost practical micromachining processes were proposed as an alternative to high-cost processes, such as silicon deep reactive ion etching (DRIE) or electro-plating, in order to reduce the fabrication cost. Gold (Au)/Tin (Sn) alloy was utilized as the solder material for bonding and hermetic sealing. The small size fabricated WLP of $1.04{\times}1.04{\times}0.4mm^3$ had an average shear strength of 10.425 $kg/mm^2$, and the leakage rate of all chips was lower than $1.2{\times}10^{-5}$ atm.cc/sec. These results met Military Standards 883F (MIL-STD-883F). As the newly proposed WLP structure is simple, and its process technology is inexpensive, the fabricated WLP is a good candidate for thin film type RF devices.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.97-100
• /
• 2007

Fuel Cell Stack performance, which is influenced by the maintenance of a constant internal environment, requires high levels of air tightness. Used for analysis, gasket for fuel cell is made of elastic rubber materials and placed over separator, and shape of deformation of a gasket affects the transformation separator and airtightness while fastening structure. Separator as made of steel sheet isn't broken under pressure but can affect gas and cool water flow by the plastic deformation process. Therefore， it is understood that assembly process is well developed in case distribution of stress and shape of deformation is shown uniformly. This study is conducted on the assumption that a fuel cell maintenance is advantageous in that conditions. In this paper, analyses of unit cell and partial model were performed and distribution of stress and shape of deformation of Gasket and separator were analyzed to evaluate the airtightness while fastening structure.

• 한국세라믹학회지
• /
• 제35권2호
• /
• pp.151-162
• /
• 1998

ZnO-BaO-$SiO_2-Al_2O_3$계 유리 및 결정화 유리 시편들을 제조하여 평판형 고체산화물 연료전지 봉착재로의 이용가능성을 조사하였다 구성층과 일치되는 열팽창 계수 및 화학적 안정성을 봉착재로의 적용에 있어 판단 기준으로 정하였다 실험된 다양한 조성의 유리 및 결정화 유리 시편들중 7.79ZnO-58.52BaO-$28.69SiO_2-5Al_2O_3$(ZBS3-A5) 결정화 유리의 측정된 열팽창 계수값은 $11.02\times10^{-6/^{\circ}C}$로써 YSZ 및 LSC의 평균 열팽창 계수 값과의 차이가 $0.07\timestimes10^{-6/^{\circ}C}$로 매우 작아 봉착시 열응력 발생의 최소화를 기대할수 있었다 이런 ZBS3-A5+LSC 접합 couple의 경우는 ZnCr2O4 의 dis-crete한 입자가 결정화 유리 부위에 형성되었고 역시 시간의 증가에 따라 이러한 입자의 성장은 없었다 특히 ZBS3-A5 구성 성분인 Ba, Zn, Sil 그리고 Al의 YSZ 및 LSC로의 확산은 없어 봉착후에 YSZ 및 LSC의 전기적 특성에 악영향을 미치지 않으리라 판단되었다.

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.317-324
• /
• 2010

Marine transportation by ships is characterized by remote, large-volume and lower rates than the others carry system. Ships account for over 80% of all international trading, and marine transportation is an internationally competitive, strategic, and great national important industry. The construction of larger and faster ships has brought about many problems such as cavitations and erosion corrosion. Cavitations and erosion corrosion make damages on materials and leads to break down members due to continuous physical contacts with shock waves and fluids from the generation and extinction of air bubbles in sea water vortex. The steel used for ship constructions was spray-coated with Al wire, and additionally sealed with fluorine silicone sealing material. Results of experiment, corrosion resistance of sealed thermal spray coating was improved, however in cavitation resistance, the large effect was not appeared. Accordingly, this study applied for thermal spray coating to provide better electrochemical characteristics and corrosion resistance in marine environment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.179-182
• /
• 2013

Many kinds of fire-stop sealants have been used for joint sealing, cable penetration part sealing and fireproof structure finishing etc in building sectors which need water-proofing and fire-stop properties. But, fire-stop sealant itself has no specific industry standards in Korea even though there are so many required properties for the application. So, in this study, for the evaluation, we adopted and applied UL standard 94(UL 94) which is commonly used for the fire retardant testing in inflammable materials like plastics and rubbers in electronics industry. In this study, we demonstrated fire resistance properties of each fire-stop sealants which varied with different formulation, thickness and origins available in Korea. Overall, fire stop sealant had better fire resistance performance than normal construction sealant. And the thicker the material, the better the fire resistance performance was. Because there is no national or industry guideline for fire stop sealant itself, each sealant products showed different level of performances under UL94 desigation. Even certain product had very poor fire proof propeties although it claims it can be used for the application.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.141-147
• /
• 1980

The sealing effect of a few cavity liners upon the dentinal tubule were studied in vitro. The materials employed in this study were Silcot (SP$\'{E}$CIALIT$\'{E}$S SEPTODONT, M.-T. GENDRAULT, Pharmacien), Hypo-Cal(Ellman Dental Mfg.Co.Inc.), Cavity Lining(De Trey), and Copaute(Harry J. Bosworth Co.). Freshly extracted human teeth were devided into 5 groups by age-under twenty, twenties, thirties, forties, and over fifty. Class V cavities were prepared routinely. The cavity walls of eight teeth of each group were lined by Silcot, Copalite, Cavity Lining, and Hypo-Cal. Remaining eight were not lined as a control. These specimens were immersed in dye solution (2 gm eosin Y to 800 cc distilled water) for 48 hours to allow maximum dye penetration into dentinal tubules. Each specimen was sectioned longitudinally including Class V cavity floor under water spray. Dye penetration into dentinal tubules were examined and following results were obtained. 1. Liners used on this study showed more or less dye penetration into dentinal tubules. But compared with the teeth without lining, the dye penetration of lined specimens were decreased. 2. Of these liners tested, Silcot was the most effective sealer upon the dentinal tubules. Copalite was the moderate sealer and Cavity Lining showed a tendency similar to Copalite. Hypo-Cal revealed the greatest dye penetration. 3. As the age was increased, the more the dye penetration into the dentinal tubules was decreased.

• 한국안전학회지
• /
• 제25권5호
• /
• pp.7-14
• /
• 2010

Ultra high pressure system, which can be generally increased over 1,000bar, needs to have sealing mechanism to protect leakage and selection of the materials used in the intensifier. Components such as pressure vessel, hydraulic hose assembly, accumulator, hydraulic cylinder, hydraulic valve, pipe, etc., are tested under the impulse-pressure conditions. Components need to be tested under 1.5 to 3 times of rated pressure to check the tolerance even though rated pressure range of these components are not ultra high pressure. So, the ultra high pressure system needs to be equiped to test components. In this study, safety assessments of ultra high pressure system which are using failure analysis of components, changing the types of the control system, and finite element analysis with static condition, are investigated.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.391-394
• /
• 2003

It is inevitable that reconsideration of the use of lead oxides in the electronics industry be undertaken as long as detrimental effects to the environment remain. To solve this problem, many recent studies on Pb-free compositions for PDP (plasma display panel) dielectric layers and also sealing glass compositions have been made. The present study was conducted to investigate whether the alternative systems for leadfree low firing glasses, detailed below, are available for use in PDP materials. The results suggest that low-melting phosphate glasses would be suitable as an alternative material for the Pb-based dielectric layer, sealants and barrier ribs in PDP.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.324-325
• /
• 2008

In this Study, We fabricated a plasma discharge cluster with external electrodes which can be applied to flexible backlight in a polymer substrate and investigated the discharge characteristics. The Sealing process was progressed in vacuum chamber, which enable to fabricate plasma discharge cluster. The results of discharge characteristics show that the static memory margin of plasma discharge cluster was increased, as Ne/Xe(5%) gas pressure was increased. also, When gas pressure was 100torr at 600um of electrode gap, we have obtained high luminance of a plasma discharge cluster.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2015년도 춘계 학술논문 발표대회
• /
• pp.15-16
• /
• 2015

In this research, the application of repair methods of water leakage cracks using self-healing technologies for subway tunnels is presented. In order to apply crack self-healing water stop agents and quick setting agents in subway tunnels, laboratory and field tests were performed based on various previous researches. Especially, this study focused on development of crack repair materials and their new repair methods. Therefore, various repair materials were examined for new repair materials with self-healing capability applied to crack sealing method and to patching repair method.